3Dconnexion Space Mouse Enterprise (3DX-700056) User Manual

1. Introduction

The 3Dconnexion Space Mouse Enterprise is an advanced 3D navigation device designed for professional CAD and 3D application users. It provides intuitive and precise control over 3D models and environments through its patented 6-Degrees-of-Freedom (6DoF) sensor. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your device.

Figure 1: The 3Dconnexion Space Mouse Enterprise in a typical workspace setup.

2. Setup Guide

2.1. Package Contents

Verify that your package contains the following items:

• 3Dconnexion Space Mouse Enterprise device
• USB cable
• Quick Start Guide (if included)

2.2. Connecting the Device

To connect your Space Mouse Enterprise:

1. Connect one end of the provided USB cable to the USB port on the Space Mouse Enterprise.
2. Connect the other end of the USB cable to an available USB port on your computer.
3. The device will power on, indicated by the illumination of the controller cap and LCD screens.

2.3. Driver Installation

For full functionality and customization, it is essential to install the latest 3Dconnexion drivers:

1. Visit the official 3Dconnexion website: www.3dconnexion.com/drivers
2. Download the appropriate driver for your operating system (Windows, macOS).
3. Run the installer and follow the on-screen instructions.
4. Restart your computer if prompted to complete the installation.

2.4. Software Configuration

After driver installation, the 3Dconnexion software allows you to customize your device:

• Access the 3Dconnexion Control Panel from your system tray or applications folder.
• Here you can adjust navigation sensitivity, assign commands to programmable keys, and configure application-specific settings.

3. Operating the Space Mouse Enterprise

The Space Mouse Enterprise offers a comprehensive set of controls for efficient 3D navigation and command execution.

Figure 2: Top view of the Space Mouse Enterprise, highlighting its layout.

3.1. 6-Degrees-of-Freedom (6DoF) Controller Cap

The core of the Space Mouse Enterprise is its controller cap, which allows for simultaneous pan, zoom, and rotate actions:

• Push/Pull: Zoom in and out of your model.
• Tilt: Rotate your model around its axes.
• Twist: Rotate your model around the screen's Z-axis.
• Pan: Move your model left, right, up, or down.

Gentle and continuous movements of the cap provide smooth and precise navigation. The sensitivity can be adjusted in the 3Dconnexion Control Panel.

Figure 3: Side view illustrating the ergonomic design and controller cap.

3.2. Programmable Keys and LCD Screens

The Space Mouse Enterprise features 31 programmable keys, including 12 Intelligent Function Keys with dedicated LCD screens:

• Intelligent Function Keys (1-12): These keys automatically update to display the actual icons from your active application's toolbar, providing instant access to frequently used commands. Their functions can be customized via the 3Dconnexion Control Panel.
• Keyboard Modifiers: Dedicated keys for common keyboard modifiers such as Ctrl, Shift, Alt, Esc, Enter, Delete, Space, and Tab. These enhance workflow by keeping your hand on the device.
• View Keys: Buttons for standard views (e.g., Top, Front, Right) and three customizable Custom View keys (V1, V2, V3) for saving and recalling specific model orientations.
• Fit Key: Instantly re-centers and scales your model to fit the screen.
• Menu Key: Provides quick access to the 3Dconnexion Control Panel for on-the-fly adjustments.

Figure 4: Close-up of the LCD screens displaying intelligent function key assignments.

3.3. Application-Specific Profiles

The 3Dconnexion software automatically detects the active application and loads a corresponding profile. This allows for different key assignments and navigation settings across various software programs (e.g., SolidWorks, AutoCAD, Blender, SketchUp). You can create and modify these profiles in the 3Dconnexion Control Panel.

4. Maintenance

4.1. Cleaning the Device

To maintain optimal performance and appearance:

• Disconnect the device from your computer before cleaning.
• Use a soft, lint-free cloth slightly dampened with water or a mild cleaning solution.
• Avoid using harsh chemicals, abrasive cleaners, or solvents, as these can damage the surface and electronic components.
• Gently wipe the surfaces, including the controller cap and buttons. Do not allow liquids to seep into openings.

4.2. Storage

When not in use, store the Space Mouse Enterprise in a clean, dry environment away from direct sunlight and extreme temperatures.

5. Troubleshooting

If you encounter issues with your Space Mouse Enterprise, refer to the following common solutions:

5.1. Device Not Recognized

• Check USB Connection: Ensure the USB cable is securely connected to both the device and your computer. Try a different USB port.
• Reinstall Drivers: Uninstall existing 3Dconnexion drivers, restart your computer, and then install the latest drivers from the official website.
• Test on Another Computer: If possible, test the device on another computer to determine if the issue is with the device or your system.

5.2. Navigation Issues (e.g., erratic movement, no movement)

• Driver Calibration: Open the 3Dconnexion Control Panel and check for calibration options for the 6DoF sensor.
• Application Focus: Ensure the 3D application window is active and in focus. Some applications may require specific settings or plugins for 3D mouse support.
• Sensitivity Settings: Adjust the navigation sensitivity in the 3Dconnexion Control Panel.

5.3. Programmable Keys Not Working

• Check Application Profile: Verify that the correct application profile is active in the 3Dconnexion Control Panel.
• Key Assignments: Ensure that the keys are correctly assigned to commands within the 3Dconnexion Control Panel for the specific application.
• Software Updates: Ensure both your 3D application and 3Dconnexion drivers are up to date.

For further assistance, refer to the 3Dconnexion support website or contact their customer service.

6. Specifications

Below are the technical specifications for the 3Dconnexion Space Mouse Enterprise (3DX-700056):

7. Warranty and Support

7.1. Manufacturer's Warranty

The 3Dconnexion Space Mouse Enterprise comes with a 3-Year Manufacturer's Warranty. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.

7.2. Technical Support

For technical support, driver downloads, FAQs, and additional documentation, please visit the official 3Dconnexion support website:

www.3dconnexion.com/support

You can also find contact information for customer service on their website.