Merax PP038358 Bar Stools Instruction Manual

Introduction

This manual provides instructions for the Merax PP038358 Bar Stools, a set of two 26-inch height metal chairs designed for indoor and outdoor use. It covers assembly, operation, maintenance, and product specifications. The stools feature a low back design and a durable metal frame. Please note that product colors may vary slightly due to lighting or monitor display.

Safety Information

• Always ensure all screws and bolts are securely tightened before using the stools.
• Do not exceed the maximum weight capacity of 500 pounds (approximately 227 kg) per stool.
• Keep children and pets away from the assembly area to prevent accidents.
• Place stools on a flat, stable surface to prevent tipping.

Package Contents

The Merax PP038358 Bar Stools package includes the following items:

• 2 x Merax PP038358 Bar Stools (Golden Black)
• All necessary assembly hardware (hex bolts, wrench)

Image: Two Merax PP038358 Golden Black bar stools, one with a backrest and one without, positioned with a matching square table against a brick wall. This image illustrates the product as received.

Setup and Assembly

The Merax PP038358 Bar Stools require minimal assembly. Follow these steps for quick and secure setup:

1. Unpack all components from the packaging and place them on a clean, soft surface to prevent scratches.
2. Identify the stool seat and the backrest component.
3. Align the backrest with the designated attachment points on the rear of the stool seat.
4. Insert the provided hex bolts through the holes and tighten them securely using the included wrench. Ensure the backrest is firmly attached and does not wobble.
5. Repeat the process for the second stool.

Assembly can typically be completed within 10 minutes per stool.

Image: A close-up view of the backrest being attached to the stool seat using two hex bolts, demonstrating the assembly process.

Operating Instructions

The Merax PP038358 Bar Stools are designed for versatile use in various indoor and outdoor environments. To use your stools:

• Place the stool on a flat, stable surface. The integrated plastic pads on the feet are designed to be slip-resistant and protect your flooring.
• The low back design provides support while allowing for ease of movement and a compact profile.
• The cross structure beneath the seat enhances stability and durability during use.

Image: A detailed view of the bar stool, pointing out key features such as the plastic pads on the feet for floor protection, the cross structure for enhanced stability, and the ergonomic design of the backrest.

Maintenance

Proper maintenance will ensure the longevity and appearance of your Merax PP038358 Bar Stools:

• Cleaning: Wipe the stool surfaces with a damp cloth. Avoid using abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the finish.
• Inspection: Periodically check all bolts and connections to ensure they remain tight. Re-tighten if necessary to maintain stability.
• Durability: The stools are protected by a high-quality paint finish designed to be scratch-proof, water-resistant, and rust-resistant.

Image: A close-up of the stool's seat, showcasing the Golden Black distressed finish, which is designed for durability and easy cleaning.

Troubleshooting

If you encounter any issues with your Merax PP038358 Bar Stools, refer to the following common solutions:

• Wobbling Stool: If a stool wobbles, first ensure it is placed on a completely flat and even surface. Then, check all assembly bolts and re-tighten them firmly. Uneven tightening can cause instability.
• Loose Parts: If any parts feel loose, immediately stop using the stool and re-tighten all bolts. Regular inspection can prevent this issue.
• Difficulty Assembling: If you experience difficulty during assembly, review the assembly steps carefully. Ensure all components are correctly oriented before tightening bolts. Do not force parts together.

Specifications

Image: A diagram illustrating the key dimensions of the bar stool in inches, including the 26-inch seat height, 32.5-inch overall height, and 16.5-inch width.

Warranty Information

Specific warranty details for the Merax PP038358 Bar Stools are not provided in the product information. Please refer to your purchase documentation or contact the retailer for any applicable warranty coverage.

Customer Support

For further assistance or inquiries regarding your Merax PP038358 Bar Stools, please contact the retailer or manufacturer directly. Contact information may be available on your purchase receipt or the product packaging.