Primode Motorized Tie Rack Instruction Manual

1. Introduction

The Primode Motorized Tie Rack is designed to organize and display up to 50 ties or belts. This electronically rotating rack features built-in LED lights for enhanced visibility, making it easier to select your desired accessory. It is engineered for simple installation on standard closet rods.

Figure 1: Primode Motorized Tie Rack in use, displaying various ties.

2. Package Contents

• Primode Motorized Tie Rack Unit
• Heavy-duty clamp for installation

Note: 4 'C' batteries are required for operation and are not included.

3. Setup Instructions

3.1 Battery Installation

1. Locate the battery compartment on the top section of the tie rack unit.
2. Open the battery compartment cover.
3. Insert 4 'C' batteries, ensuring correct polarity (+/-).
4. Close the battery compartment cover securely.

3.2 Mounting the Tie Rack

1. Identify a suitable standard-sized closet rod. The tie rack's clamp is designed to fit rods with a diameter up to 1.3 inches.
2. Attach the heavy-duty clamp to the closet rod.
3. Secure the motorized tie rack unit to the clamp. Ensure it is firmly attached to prevent movement during operation.

Figure 2: Detail of the tie rack's control buttons and mounting on a closet rod.

4. Operating Instructions

4.1 Attaching Ties and Belts

• The tie rack features multiple hooks designed to hold up to 50 ties or belts.
• Carefully place each tie or belt onto an individual hook. Ensure items are evenly distributed to maintain balance.

4.2 Motorized Rotation

• To rotate the rack, press the directional buttons located on the front of the unit.
• Press the left arrow button to rotate the rack counter-clockwise.
• Press the right arrow button to rotate the rack clockwise.
• The rack will rotate slowly, allowing you to view your collection. Press the button again to stop rotation.

4.3 LED Lights

• The built-in LED lights automatically activate during rotation to illuminate your ties and belts.
• The lights will automatically turn off after approximately 10 seconds of inactivity to conserve battery life.

5. Maintenance

• To clean the tie rack, wipe it with a soft, damp cloth. Avoid using abrasive cleaners or solvents.
• Regularly check the battery compartment for any signs of corrosion. Replace batteries as needed.
• Ensure the tie rack is not overloaded, as this may affect the motor's performance and durability.

6. Troubleshooting

• Rack not rotating: Check if the 4 'C' batteries are correctly installed and have sufficient power. Replace if necessary.
• LED lights not working: Ensure batteries are fresh and correctly inserted. The lights activate only during rotation.
• Rack feels unstable: Verify that the heavy-duty clamp is securely fastened to the closet rod and that the tie rack unit is properly attached to the clamp. Ensure the closet rod diameter is within the specified limit (up to 1.3 inches).

7. Specifications

Figure 3: Product dimensions for the Primode Motorized Tie Rack.

8. Warranty and Support

Primode offers a 100% customer satisfaction guarantee for this motorized tie rack. For any issues or support, please refer to the contact information provided with your purchase or visit the official Primode website.