1. Introduction
The Sanitas SEA 32 is an electric acupuncture device designed for needle-free stimulation of acupuncture points. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your device. Please read all instructions carefully before first use and retain this manual for future reference.
2. Safety Information
Important Safety Instructions: Failure to follow these instructions may result in injury or damage to the device.
- Consult a healthcare professional before using this device, especially if you have pre-existing medical conditions, are pregnant, or have a pacemaker.
- Do not use on open wounds, irritated skin, or mucous membranes.
- Keep out of reach of children.
- Do not immerse the device in water or other liquids.
- Use only the specified batteries and dispose of them properly.
- Do not attempt to repair or modify the device yourself. Contact customer support for assistance.
3. Package Contents
Carefully unpack your Sanitas SEA 32 device and check that all components are present and undamaged. If any items are missing or damaged, contact your retailer.
- Sanitas SEA 32 Electric Acupuncture Device
- Golden stimulation tip (additional)
- Batteries (typically 2x AAA, check device for specifics)
- Therapy book
- Instruction Manual
Image 3.1: The Sanitas SEA 32 device, therapy book, and instruction manual displayed within its original packaging.
4. Device Components
Familiarize yourself with the different parts of your Sanitas SEA 32 device:
- Stimulation Tip: The contact point for applying stimulation.
- Acupuncture Point Locator: Visual and auditory indicators to help locate acupuncture points.
- Intensity Control: Buttons or dial to adjust the stimulation strength.
- Stimulation Time Selector: Buttons to choose between 30-second or 60-second stimulation durations.
- Power Button: To turn the device on and off.
- Battery Compartment: Located on the back of the device.
Image 4.1: A close-up view of the Sanitas SEA 32 device, highlighting its control buttons and display area.
Image 4.2: A hand holding the Sanitas SEA 32 device, illustrating its ergonomic design and the location of the battery compartment on the back.
5. Setup
- Insert Batteries: Open the battery compartment cover on the back of the device. Insert the specified batteries (e.g., 2x AAA) according to the polarity markings (+/-). Close the cover securely.
- Attach Stimulation Tip: Gently attach the desired stimulation tip to the front of the device. Ensure it is firmly seated.
6. Operating Instructions
Follow these steps for effective use of your Sanitas SEA 32 device:
- Power On: Press the Power button to turn on the device. The display lights will illuminate.
- Locate Acupuncture Point: Gently move the stimulation tip over the skin in the area where you wish to apply therapy. The device will provide an auditory signal and/or visual indication (e.g., illuminated lights) when an acupuncture point is detected.
- Select Stimulation Time: Use the '30s' or '60s' buttons to choose your desired stimulation duration.
- Adjust Intensity: Use the intensity control buttons (e.g., '+' and '-') to increase or decrease the stimulation strength to a comfortable level. Start with the lowest setting and gradually increase.
- Apply Stimulation: Once the point is located and settings are chosen, hold the tip firmly on the point for the selected duration. The device will automatically stop after the set time.
- Power Off: After use, press the Power button to turn off the device.
Image 6.1: A hand holding the Sanitas SEA 32 device, demonstrating the illuminated indicator lights during operation, which assist in locating acupuncture points and indicating stimulation intensity.
7. Maintenance and Care
- Cleaning: After each use, wipe the stimulation tip and the device body with a soft, damp cloth. Do not use abrasive cleaners or immerse the device in water.
- Storage: Store the device in a cool, dry place, away from direct sunlight and extreme temperatures. If not using for an extended period, remove the batteries to prevent leakage.
- Battery Replacement: Replace batteries when the device's performance diminishes or the low battery indicator appears.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not turn on. | Dead or incorrectly inserted batteries. | Check battery polarity. Replace batteries with new ones. |
| No stimulation felt. | Low intensity setting, poor skin contact, or dead batteries. | Increase intensity. Ensure firm contact with skin. Replace batteries. |
| Acupuncture point not easily found. | Incorrect technique or dry skin. | Refer to the therapy book for point locations. Ensure skin is clean and slightly moist if necessary. |
9. Specifications
- Model: Sanitas SEA 32
- Manufacturer: SANITAS
- Power Supply: Battery operated (e.g., 2x AAA, 1.5V)
- Output Current: Max. 1.5mA (500 Ohm)
- Output Frequency: Typ. 10Hz
- ASIN: B01EZ6PVLM
- UPC: 4211125625504
Image 9.1: The back of the Sanitas SEA 32 device, displaying its technical specifications label including model, power requirements, and output details.
10. Warranty and Support
The Sanitas SEA 32 device comes with a 2-year warranty from the date of purchase. Please retain your proof of purchase for warranty claims.
For technical support, warranty claims, or further inquiries, please contact your retailer or the manufacturer directly. Refer to the contact information provided in the original packaging or on the manufacturer's website.
