GODOX X1N
Contents
Godox X1N TTL Remote Controller Kit for Nikon User Manual
Model: X1N
1. Introduction
The Godox X1N TTL Remote Controller Kit for Nikon is a sophisticated wireless flash trigger system designed for Nikon DSLR cameras. It offers multi-channel triggering, stable signal transmission, and sensitive reaction, enabling versatile control over your lighting setup. This kit is compatible with Nikon cameras supporting I-TTL autoflash and features a built-in 2.4G wireless transmission system for extended range and creative triggering methods.
Key features include I-TTL auto flash support, 1/8000s High-speed Sync, Flash Exposure Compensation, Flash Exposure Lock, and Modeling Flash. Both the transmitter and receiver units are equipped with backlight LCD panels for convenient operation. Additional functions such as synchronization delay setting, wireless shutter release, and zoom setting enhance its utility. The units also include a PC sync socket for input and output.
2. Product Overview
The Godox X1N kit typically includes a transmitter and a receiver unit. Below are visual representations and descriptions of the components.

Figure 2.1: Godox X1N TTL Remote Controller Kit, displaying both the transmitter and receiver units. The transmitter (right) shows its LCD screen with settings, while the receiver (left) displays channel and group information.

Figure 2.2: Top view of the Godox X1N transmitter unit, highlighting the large LCD screen, channel (CH), group (GR), and mode (MODE) buttons, and the adjustment dial on the right side.

Figure 2.3: Side view of the Godox X1N transmitter, showing the power ON/OFF switches for the unit itself and for the wireless function.

Figure 2.4: The Godox X1N transmitter connected to a camera via a sync cable, demonstrating its use as a wireless shutter release or for triggering studio flashes.
2.1 Components
- X1N Transmitter: Mounts on the camera's hot shoe to send wireless signals.
- X1N Receiver: Attaches to a flash unit to receive wireless signals.
- Sync Cable: For connecting the receiver to studio flashes or for wireless shutter release.
3. Setup
3.1 Battery Installation
Both the transmitter and receiver units require batteries for operation. Refer to the battery compartment on each unit for correct polarity and type (typically AA batteries).
3.2 Mounting the Transmitter
- Slide the X1N transmitter onto your Nikon camera's hot shoe.
- Secure the transmitter by tightening the locking ring or lever on the hot shoe mount.
3.3 Mounting the Receiver
- Slide your compatible flash unit onto the X1N receiver's hot shoe.
- Secure the flash unit.
- If using a studio flash, connect the receiver to the flash's sync port using the provided sync cable.
3.4 Powering On
Turn on both the transmitter and receiver units using their respective power switches. Ensure the wireless function is also enabled on the transmitter if it has a separate switch.
4. Operating Instructions
4.1 Channel and Group Settings
For proper communication, the transmitter and receiver must be set to the same channel and group. The X1N supports multiple channels (e.g., 32 channels) and groups (e.g., 5 groups: A, B, C, D, E).
- Press the CH button on the transmitter to cycle through channels.
- Press the GR button to select or deselect groups for control.
- Adjust the channel and group on the receiver to match the transmitter.
4.2 Flash Modes
The X1N supports various flash modes:
- TTL (Through-The-Lens): Automatic flash exposure.
- Manual (M): Allows manual setting of flash power.
- Multi (Stroboscopic): Fires a series of rapid flashes.
Press the MODE button on the transmitter to switch between these modes.
4.3 High-Speed Sync (HSS)
The X1N supports High-Speed Sync up to 1/8000s, allowing you to use flash at shutter speeds faster than your camera's native sync speed. This is useful for overpowering ambient light or achieving shallow depth of field with flash.
4.5 Flash Exposure Compensation (FEC)
Adjust the flash output in TTL mode using FEC. Use the adjustment dial on the transmitter to increase or decrease flash exposure.
4.6 Wireless Shutter Release
The X1N kit can also function as a wireless shutter release. Connect the receiver to your camera's remote port using a compatible cable (not always included in standard kit, may require separate purchase). Then, use the transmitter to trigger the camera shutter remotely.
5. Maintenance
5.1 Cleaning
Wipe the units with a soft, dry cloth. Do not use liquid cleaners or solvents, as they may damage the electronic components or finish.
5.2 Battery Care
- Remove batteries if the units will not be used for an extended period to prevent leakage.
- Use high-quality batteries for optimal performance.
- Dispose of used batteries responsibly.
5.3 Storage
Store the X1N kit in a cool, dry place, away from direct sunlight and extreme temperatures. Protect it from dust and moisture.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Flash not firing |
|
|
| Inconsistent firing |
|
|
| LCD screen not visible/flickering |
|
|
7. Specifications
| Feature | Detail |
|---|---|
| Model | X1N |
| Compatible Cameras | Nikon DSLR series cameras (I-TTL compatible) |
| Built-in Wireless System | 2.4G Wireless Transmission |
| Transmission Distance | Approx. 100 meters (328 feet) |
| Flash Modes | I-TTL Autoflash, Manual, Multi (Stroboscopic) |
| High-Speed Sync (HSS) | Up to 1/8000s |
| Flash Exposure Compensation (FEC) | Supported |
| Flash Exposure Lock (FEL) | Supported |
| Modeling Flash | Supported |
| Wireless Shutter Release | Supported (requires compatible cable) |
| Channels | 32 |
| Groups | 5 (A, B, C, D, E) |
| Sync Delay Setting | Supported |
| Zoom Setting | Supported |
| PC Sync Socket | Input and Output |
| Power Supply | AA Batteries (not specified, but common for such devices) |
| Product Dimensions | 7.09 x 2.99 x 5.71 inches |
| Item Weight | 11.4 ounces |
8. Warranty and Support
For warranty information and technical support, please refer to the official Godox website or contact your local distributor. Keep your purchase receipt as proof of purchase for warranty claims.
Manufacturer: Godox
Brand: GODOX
ASIN: B01EYWAH0M
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.