1. Introduction
Thank you for choosing the SoundPEATS P2 Portable Bluetooth Speaker. This manual provides essential information for setting up, operating, and maintaining your speaker. The SoundPEATS P2 is designed for both indoor and outdoor use, featuring IP65 water and dust resistance, a 5W audio driver for clear sound, and a built-in microphone for hands-free calling.
Image 1.1: SoundPEATS P2 Portable Bluetooth Speaker. This image displays the front and top view of the speaker, highlighting its rugged design and control buttons.
2. Package Contents
Please check the package for the following items:
- SoundPEATS P2 Portable Bluetooth Speaker
- USB Charging Cable
- 3.5mm Audio Cable
- Protective Case
- User Manual (this document)
3. Product Overview
Familiarize yourself with the speaker's components and controls:
Image 3.1: Detailed diagram of the SoundPEATS P2 speaker, showing all buttons, ports, and features.
- Power Button: Press and hold to turn the speaker ON/OFF.
- Volume - / Previous Track: Short press for volume down, long press for previous track.
- Multifunction Button (MFB): Play/Pause, Answer/End calls, Activate voice assistant.
- Volume + / Next Track: Short press for volume up, long press for next track.
- LED Indicator: Displays power, charging, and Bluetooth status.
- Microphone: For hands-free calls.
- USB Charging Port: For charging the speaker.
- 3.5mm Audio Input: For wired connection to audio devices.
- Bicycle Screw Connector: For mounting the speaker.
- Detachable Silicone Strap: For portability and attachment.
4. Setup
4.1 Charging the Speaker
Before first use, fully charge the speaker. Connect the provided USB charging cable to the speaker's USB charging port (7) and the other end to a USB power adapter (not included) or a computer's USB port. The LED indicator (5) will show charging status.
- Charging: Red LED solid.
- Fully Charged: Red LED turns off.
A full charge takes approximately 3-4 hours and provides up to 10 hours of playtime at moderate volume.
4.2 Bluetooth Pairing
To connect your SoundPEATS P2 speaker to a Bluetooth-enabled device:
Image 4.1: Illustration of the SoundPEATS P2 speaker wirelessly connecting to a smartphone via Bluetooth.
- Ensure the speaker is charged.
- Press and hold the Power Button (1) for 3 seconds to turn on the speaker. The LED indicator (5) will flash blue, indicating it is in pairing mode.
- Activate Bluetooth on your device (smartphone, tablet, laptop, etc.).
- Search for "SoundPEATS P2" in your device's Bluetooth list and select it to connect.
- Once connected, the LED indicator (5) will turn solid blue. You will hear an audible confirmation.
- If pairing fails, turn off the speaker and repeat the steps. The speaker will automatically attempt to reconnect to the last paired device when powered on.
The Bluetooth connection range is up to 10 meters (33 feet) without significant obstacles.
5. Operating the Speaker
5.1 Basic Functions
- Power ON/OFF: Press and hold the Power Button (1) for 3 seconds.
- Play/Pause: Short press the Multifunction Button (3).
- Volume Up: Short press the Volume + Button (4).
- Volume Down: Short press the Volume - Button (2).
- Next Track: Long press the Volume + Button (4).
- Previous Track: Long press the Volume - Button (2).
5.2 Call Functions
When connected to a smartphone via Bluetooth, you can manage calls:
- Answer Call: Short press the Multifunction Button (3).
- End Call: Short press the Multifunction Button (3) during a call.
- Reject Call: Long press the Multifunction Button (3) for 2 seconds.
5.3 Aux-in Mode
To use the speaker with devices that do not have Bluetooth:
- Connect one end of the 3.5mm audio cable to the speaker's 3.5mm Audio Input (8).
- Connect the other end of the cable to the audio output jack of your device.
- The speaker will automatically switch to Aux-in mode.
- Volume control can be adjusted on both the speaker and the connected device. Track control must be done on the connected device.
6. Water and Dust Resistance (IP65)
The SoundPEATS P2 speaker features an IP65 rating, meaning it is protected against dust ingress and low-pressure water jets from any direction. This makes it suitable for use in environments where it might be exposed to splashes or light rain, such as by a poolside, in a shower, or during outdoor activities.
Image 6.1: The SoundPEATS P2 speaker being splashed with water, illustrating its IP65 water-resistant capability.
Important:
- The IP65 rating does not mean the speaker can be submerged in water. Avoid full immersion.
- Ensure the rubber flap covering the charging port and audio input is securely closed to maintain water resistance.
7. Maintenance
- Clean the speaker with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners.
- Keep the speaker away from extreme temperatures, direct sunlight, and open flames.
- Store the speaker in a cool, dry place when not in use.
- If the speaker gets wet, wipe it dry thoroughly before charging.
8. Troubleshooting
If you encounter issues with your SoundPEATS P2 speaker, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Speaker does not turn on | Low battery | Charge the speaker fully. |
| Cannot pair via Bluetooth | Speaker not in pairing mode; Bluetooth off on device; device too far | Ensure speaker is flashing blue LED; enable Bluetooth on device; move device closer (within 10m); restart speaker and device. |
| No sound | Volume too low; incorrect input mode; device not playing | Increase speaker and device volume; ensure correct mode (Bluetooth/Aux-in); check if audio is playing on the source device. |
| Poor sound quality | Weak Bluetooth signal; interference | Move device closer to speaker; avoid obstacles; turn off other wireless devices. |
| Microphone not working during calls | Speaker not selected as audio output for calls | On your phone, ensure the SoundPEATS P2 is selected as the audio output for calls. |
9. Specifications
| Feature | Specification |
|---|---|
| Model | P2 |
| Bluetooth Version | Not specified (typically 4.0 or higher for this era) |
| Water Resistance Rating | IP65 |
| Speaker Output Power | 5 Watts |
| Audio Output Mode | Stereo |
| Battery Capacity | 2000 mAh |
| Playtime | Up to 10 hours (at 50-60% volume) |
| Charging Time | Approx. 3-4 hours |
| Connectivity | Wireless (Bluetooth), 3.5mm Aux-in |
| Microphone | Built-in |
| Product Dimensions (LxWxH) | 12.1 x 5.9 x 11.1 cm |
| Item Weight | 390 Grams |
| Compatible Devices | Gaming Console, Karaoke Machine, Laptop, MP3 Player, Projector, Smartphone, Tablet, Television |
10. Warranty and Support
The SoundPEATS P2 Portable Bluetooth Speaker comes with a 1-Year Manufacturer Warranty from the date of purchase. This warranty covers manufacturing defects and ensures the product functions as intended under normal use.
For warranty claims, technical support, or any inquiries, please contact SoundPEATS customer service through the retailer where the product was purchased or visit the official SoundPEATS website for support contact information.
Please retain your proof of purchase for warranty purposes.
