Panasonic High Speed Juicer MJ-H200 User Manual

1. Introduction

Thank you for purchasing the Panasonic High Speed Juicer MJ-H200. This manual provides essential information for the safe and efficient operation, maintenance, and care of your new juicer. Please read these instructions thoroughly before first use and keep them for future reference.

The Panasonic High Speed Juicer MJ-H200 is designed for efficient juice extraction, delivering fresh juice quickly.

2. Safety Precautions

To ensure safe operation, always follow these basic safety precautions:

• Read all instructions before using the appliance.
• Do not immerse the motor unit in water or other liquids.
• Keep hands and utensils out of the feed chute during operation to prevent injury.
• Always ensure the juicer is properly assembled before use.
• Unplug the appliance from the outlet when not in use, before assembling or disassembling parts, and before cleaning.
• Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been damaged in any manner.
• This appliance is for household use only.
• The appliance features overheat protection. If the motor stops, unplug it and let it cool down for at least 30 minutes before restarting.

3. Product Components

Familiarize yourself with the parts of your Panasonic High Speed Juicer MJ-H200:

• Pusher: Used to guide ingredients into the feed chute.
• Feed Chute/Inlet: Where ingredients are inserted.
• Lid: Covers the juicing mechanism.
• Fine Cutter: Sharp blade for cutting ingredients.
• Clear Filter: Mesh filter for separating juice from pulp.
• Spinner: The rotating component that extracts juice.
• Spout: Where the extracted juice exits.
• Juice Cup Lid: Covers the juice cup.
• Juice Cup (500 ml): Collects the fresh juice.
• Pulp Receiver: Collects the discarded pulp (approx. 1.7L capacity).
• Motor Unit/Main Body: Contains the motor and control button.
• Control Button: For turning the juicer ON/OFF.

Key components of the juicer for operation.

Exploded view of the juicer components for assembly and cleaning.

4. Setup and Assembly

1. Unpack: Carefully remove all parts from the packaging. Retain packaging for storage or return if necessary.
2. Clean Before First Use: Wash all detachable parts (lid, pusher, juice cup, pulp receiver, spinner, filter) in warm, soapy water. Rinse thoroughly and dry. The main motor unit should only be wiped with a damp cloth.
3. Assemble the Juicer:
   • Place the motor unit on a stable, flat, and dry surface.
   • Insert the pulp receiver onto the motor unit.
   • Place the spinner assembly (fine cutter and clear filter) securely into the pulp receiver. Ensure it clicks into place.
   • Position the lid onto the pulp receiver, aligning the spout with the opening. Lock the lid into place if your model has a locking mechanism.
   • Place the juice cup with its lid under the spout.
   • Insert the pusher into the feed chute.
4. Connect Power: Plug the power cord into a suitable 100V electrical outlet.

The juicer fully assembled and ready for operation.

5. Operating Instructions

1. Prepare Ingredients: Wash fruits and vegetables thoroughly. Cut larger items into pieces that fit easily into the feed chute. Remove hard pits, large seeds, and tough skins (e.g., pineapple, melon).
2. Start Juicing:
   • Ensure the juice cup is placed under the spout.
   • Press the ON button (labeled '入' or 'On') on the front of the motor unit to start the juicer.
   • Slowly feed the prepared ingredients into the feed chute. Use the pusher to gently guide them down. Do not force ingredients, as this can damage the motor or reduce juice yield.
   • The juicer will separate the juice into the cup and the pulp into the pulp receiver.
3. Drip Prevention: To prevent juice from dripping after juicing, gently lift the spout upwards. This will stop the flow of any remaining juice.
4. Stop Juicing: When finished, press the OFF button (labeled '切' or 'Off') to stop the motor. Unplug the appliance from the power outlet.

Lift the spout to prevent drips after juicing.

6. Maintenance and Cleaning

Regular cleaning ensures optimal performance and extends the life of your juicer. Always unplug the juicer before cleaning.

1. Disassembly: Disassemble the juicer in reverse order of assembly: remove the pusher, juice cup, lid, spinner assembly, and pulp receiver.
2. Cleaning Components:
   • Spinner and Clear Filter: These parts require thorough cleaning immediately after use to prevent pulp from drying and hardening. Use the included cleaning brush or a sponge with warm, soapy water to remove all pulp residue from the mesh filter.
   • Pulp Receiver, Juice Cup, Lid, Pusher: Wash these parts in warm, soapy water. Rinse thoroughly and dry.
   • Motor Unit: Wipe the exterior of the motor unit with a damp cloth. Never immerse the motor unit in water or rinse it under running water.
3. Dishwasher Safety: Please note that the Panasonic High Speed Juicer MJ-H200 is not dishwasher safe. All detachable parts should be hand-washed.
4. Drying and Storage: Ensure all parts are completely dry before reassembling or storing. For compact storage, the juice cup can be stored within the pulp receiver.

The clear filter is designed for easy cleaning with a sponge.

The large pulp receiver simplifies cleaning, and the design allows for compact storage.

7. Troubleshooting

If you encounter issues with your juicer, refer to the following common problems and solutions:

If the problem persists after trying these solutions, please contact customer support.

8. Specifications

9. Warranty and Support

Panasonic products are manufactured to high-quality standards. For information regarding your product's warranty, please refer to the warranty card included with your purchase or visit the official Panasonic website for your region.

For technical support, spare parts, or service inquiries, please contact Panasonic customer service. Have your model number (MJ-H200) and purchase details ready when contacting support.

You can find more information and contact details on the official Panasonic website: www.panasonic.com