Num'Axes Charger Instruction Manual

Introduction

This manual provides essential information for the safe and effective use of your Num'Axes Charger. This charger is specifically designed for use with Num'Axes PIE1009 and PIE1025 camera models. Please read this manual thoroughly before using the product and retain it for future reference.

Safety Information

• Ensure the charger is used only with compatible devices (Num'Axes PIE1009 and PIE1025 cameras).
• Do not expose the charger to water, moisture, or extreme temperatures.
• Avoid dropping or subjecting the charger to severe impacts.
• Do not attempt to disassemble or modify the charger. This will void the warranty and may cause damage or injury.
• Unplug the charger from the power outlet when not in use or during electrical storms.
• Keep out of reach of children.

Package Contents

• 1 x Num'Axes Charger (Model: NGPIEACC006)

An image showing the black Num'Axes charger with its two-pin Europlug and the DC output connector.

Setup

1. Identify the charging port on your Num'Axes PIE1009 or PIE1025 camera.
2. Connect the DC output connector of the Num'Axes charger to the charging port of your camera. Ensure a firm and secure connection.
3. Plug the two-pin Europlug (Type C/EF) of the charger into a standard electrical wall outlet (100-240V AC, 50/60Hz).
4. Verify that the camera indicates it is charging (e.g., a charging indicator light on the camera).

Operating Instructions

Once connected, the charger will automatically begin charging your compatible Num'Axes camera. The charging process is typically managed by the camera's internal battery management system. Refer to your camera's specific manual for details on charging indicators and expected charging times.

• Always ensure the charger is connected to a stable power source within the specified voltage range (100-240V).
• Disconnect the charger from the camera and the wall outlet once charging is complete or if the camera is not in use for an extended period.

Maintenance

• Keep the charger clean and free from dust and debris. Use a soft, dry cloth for cleaning.
• Do not use liquid cleaners or abrasive materials.
• Store the charger in a cool, dry place when not in use.
• Regularly inspect the cable and connectors for any signs of damage. If damage is observed, discontinue use immediately and replace the charger.

Troubleshooting

Charger not working:

• Check Power Outlet: Ensure the wall outlet is functional by testing it with another device.
• Check Connections: Verify that both ends of the charger (to the wall and to the camera) are securely connected.
• Inspect Cable: Look for any visible damage to the charger cable or connectors. If damaged, do not use.
• Camera Compatibility: Confirm that your camera model is either PIE1009 or PIE1025. This charger is not compatible with other models.

Slow charging:

• Ensure the camera is not in heavy use while charging.
• Verify that the charger specifications (9V-2A output) match the camera's requirements.

Specifications

Warranty and Support

For information regarding warranty terms and conditions, please refer to the warranty card included with your product or visit the official Num'Axes website. For technical support or further assistance, please contact Num'Axes customer service through their official channels.

Website: www.numaxes.com (Example link, actual link may vary)