UYIKOO B01ET63DJK

UYIKOO Colorful Umbrella Wall Rack Key Holder Instruction Manual

Model: B01ET63DJK

Introduction

The UYIKOO Colorful Umbrella Wall Rack is designed to provide a practical and decorative solution for organizing small items such as keys, jewelry, and other accessories. This manual provides detailed instructions for assembly, installation, and proper use to ensure optimal performance and longevity of your key holders.

A set of six colorful umbrella-shaped wall hooks in red, orange, yellow, green, and blue, mounted on a white wall.

Image: UYIKOO Colorful Umbrella Wall Rack Key Holders

Package Contents

Each package contains the following items:

  • 6 x UYIKOO Umbrella Key Holder Units (includes umbrella canopy and handle with adhesive backing)

Setup and Installation

Proper surface preparation is crucial for secure adhesion. Please follow these guidelines:

Surface Preparation

Before installation, ensure the chosen surface is clean, dry, and smooth. Recommended surfaces include glass, metal, marble, plastic, smooth tiles, and stainless steel. Avoid installation on paper walls, uneven tiles, foam plastic, painted walls, rough surfaces, or poor wall surfaces, as adhesion may be compromised.

An image showing recommended surfaces like marble, plastic, metal, glass, smooth tiles, and stainless steel, and unsuitable surfaces like paper wall, uneven tiles, foam plastic, painted wall, rough surface, and poor wall surface.

Image: Recommended and Unsuitable Installation Surfaces

Assembly Steps

The umbrella key holders require simple assembly. Follow these steps:

  1. Carefully separate the umbrella canopy from the handle.
  2. Insert the handle's narrow end through the small hole in the center of the umbrella canopy from the top.
  3. Secure the handle by pushing it firmly until it clicks into place or feels stable.
  4. Ensure the handle is securely attached to the umbrella canopy.
  5. The umbrella can be assembled in different orientations to serve as a hook or a small storage cup. Refer to the 'Three Assembly Methods' image for visual guidance.
A nine-panel image demonstrating the step-by-step assembly of the umbrella key holder, showing how to attach the handle to the umbrella canopy.

Image: Step-by-Step Assembly Guide

An image illustrating three different assembly methods for the umbrella key holder: as a standard hook, an inverted hook, and a small storage cup.

Image: Three Assembly Methods

Mounting

After assembly, peel off the protective film from the adhesive backing on the umbrella unit. Press the key holder firmly against the prepared surface for at least 30 seconds. Allow 24 hours for the adhesive to fully cure before hanging any items to ensure maximum hold. The maximum recommended weight capacity per hook is 1 kilogram (approximately 2.2 pounds).

Operating Instructions

Once installed, the UYIKOO umbrella key holders can be used to hang various lightweight items. The umbrella handle acts as a hook for keys, lanyards, or small bags. When inverted, the umbrella canopy can serve as a small tray for items like coins, beads, or jewelry. Do not exceed the 1 kilogram weight limit per hook to prevent detachment.

Maintenance

To clean your UYIKOO umbrella key holders, wipe them with a clean, soft, damp cloth. Avoid using abrasive cleaners or harsh chemicals, as these may damage the plastic material or the adhesive. Ensure the surface is dry after cleaning.

Troubleshooting

Issue: Key holder falls off the wall.

Solution: This often occurs due to improper surface preparation or exceeding the weight limit. Ensure the surface is clean, dry, smooth, and suitable for adhesive mounting (refer to 'Setup and Installation'). Allow 24 hours for the adhesive to cure before use. If the issue persists, consider using a stronger adhesive suitable for your wall type, such as high-quality command strips, after removing the original adhesive.

Issue: Handle detaches from the umbrella canopy.

Solution: Ensure the handle is firmly pushed into the canopy during assembly until it feels secure. If a handle consistently detaches, it may indicate a manufacturing defect. Contact customer support for assistance.

Specifications

BrandUYIKOO
MaterialPlastic
Finish TypePolypropylene Finish
Mounting TypeWall Mount
Recommended UsesKeys, Jewelry, Bathroom, Kitchen, Office
Included Components6pc cute umbrella key chain hook
Unit Count6 Count
Surface RecommendationGlass, Metal
Maximum Weight Recommendation1 Kilogram
Number of Hooks6
Item Dimensions6.69 x 4.8 x 3.31 inches
Item Weight0.1 Pounds
An image displaying the dimensions of the umbrella key holder components: umbrella canopy (6cm, 10.5cm, 8.5cm) and handle (11cm).

Image: Product Dimensions

Warranty and Support

For any questions, concerns, or support regarding your UYIKOO Colorful Umbrella Wall Rack Key Holders, please refer to the seller's contact information on the purchase platform. Keep your purchase receipt for potential warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.