1. Introduction
This manual provides comprehensive instructions for the operation and maintenance of your Alba TVD3408 TV DVD Combi Remote Control. Please read this manual thoroughly before use to ensure proper functionality and to maximize your user experience.
2. Safety Information
- Do not expose the remote control to direct sunlight, high temperatures, or humidity.
- Avoid dropping or subjecting the remote control to strong impacts.
- Do not mix old and new batteries, or different types of batteries.
- Remove batteries if the remote control will not be used for an extended period to prevent leakage.
- Keep batteries out of reach of children.
3. Package Contents
The package should contain the following item:
- Alba TVD3408 TV DVD Combi Remote Control
Note: Batteries are typically not included and must be purchased separately.
4. Remote Control Layout
Familiarize yourself with the buttons and their functions on your Alba TVD3408 remote control.
Image: The Alba TVD3408 remote control, a white rectangular device with numerous grey buttons. The brand "ALBA" is visible on the right side.
Button Functions:
- STANDBY (Red Button): Powers the TV/DVD unit on or off.
- TV/V: Switches between TV and Video input modes.
- DVD/TV: Toggles between DVD player and TV modes.
- OPEN / CLOSE: Opens and closes the DVD tray.
- Number Buttons (0-9): For direct channel selection or inputting numerical values.
- SLEEP: Activates the sleep timer function.
- DISPLAY: Shows on-screen information.
- MUTE: Silences the audio output.
- MENU: Accesses the main menu for TV or DVD functions.
- VOLUME (+/-): Adjusts the audio volume level.
- CHANNEL (+/-): Changes TV channels or navigates menu options.
- Directional Arrows (Up, Down, Left, Right): Navigates through menus and options.
- ENTER: Confirms selections in menus.
- DVD MENU: Accesses the DVD disc menu.
- PLAY: Starts DVD playback.
- PAUSE (implied from OCR 'ASTER'): Pauses DVD playback.
- STOP: Stops DVD playback.
- SCAN (<< / >>): Fast forward or rewind during DVD playback.
- REPEAT: Repeats a chapter, track, or entire disc.
- SUBTITLE: Toggles subtitle display.
- SETUP: Accesses system setup menus.
- SEARCH: Initiates search functions.
- CLEAR: Clears current input or selection.
- PROGRAM: Accesses program list or programming functions.
- ZOOM: Zooms in on the picture.
5. Battery Installation
- Locate the battery compartment cover on the back of the remote control.
- Slide the cover downwards or press the latch and lift to open.
- Insert two AAA batteries (not included), ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
- Replace the battery compartment cover by sliding it back into place until it clicks securely.
Note: Incorrect battery installation may prevent the remote from functioning.
6. Setup
The Alba TVD3408 remote control is designed as a direct replacement for compatible Alba TV DVD Combi units. Typically, no complex setup or programming is required beyond battery installation. Once batteries are installed, the remote should function immediately with your Alba TV DVD Combi unit.
If the remote does not respond, ensure:
- Batteries are correctly inserted and have sufficient charge.
- There are no obstructions between the remote control and the TV/DVD unit's infrared sensor.
- You are within the operational range (approximately 10 meters).
7. Operating Instructions
7.1 Basic TV Operation
- Power On/Off: Press the STANDBY button.
- Switch to TV Mode: Press the DVD/TV button until TV mode is selected, or TV/V for video input.
- Change Channel: Use the CHANNEL (+/-) buttons or enter the channel number directly using the Number Buttons (0-9).
- Adjust Volume: Use the VOLUME (+/-) buttons.
- Mute Sound: Press the MUTE button. Press again to unmute.
- Access TV Menu: Press the MENU button. Use directional arrows and ENTER to navigate.
7.2 Basic DVD Operation
- Switch to DVD Mode: Press the DVD/TV button until DVD mode is selected.
- Open/Close Disc Tray: Press the OPEN / CLOSE button.
- Play Disc: Insert a DVD, then press the PLAY button.
- Pause Playback: Press the PAUSE button. Press PLAY to resume.
- Stop Playback: Press the STOP button.
- Fast Forward/Rewind: Use the SCAN (<< / >>) buttons.
- Access DVD Menu: Press the DVD MENU button. Use directional arrows and ENTER to navigate.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Remote not responding. | Dead or incorrectly inserted batteries. | Replace batteries with new ones, ensuring correct polarity (+/-). |
| Remote has limited range or intermittent response. | Weak batteries; obstruction between remote and unit; remote too far from unit. | Replace batteries; remove obstructions; ensure you are within 10 meters of the unit. |
| Specific functions not working. | Incorrect mode selected (TV vs. DVD); button malfunction. | Ensure the correct mode (TV or DVD) is selected using the DVD/TV button. If problem persists, the remote may be faulty. |
9. Specifications
- Model: TVD3408
- Brand: Alba
- Compatible Devices: Television (specifically Alba TV DVD Combi units)
- Maximum Operating Range: Approximately 10 meters
- Power Source: 2 x AAA Batteries (not included)
10. Maintenance
- Clean the remote control regularly with a soft, dry cloth.
- Do not use liquid cleaners or abrasive materials.
- If the remote will not be used for an extended period, remove the batteries to prevent corrosion from leakage.
11. Warranty and Support
Information regarding specific warranty terms for this replacement remote control is not available in the provided product details. For warranty inquiries or technical support, please refer to the documentation provided with your original Alba TV DVD Combi unit or contact the retailer from whom this remote control was purchased.
