noblechairs NBL-PU-BLA-002
noblechairs EPIC Gaming and Office Chair User Manual
Model: NBL-PU-BLA-002
1. Introduction
Welcome to the noblechairs EPIC Gaming and Office Chair user manual. This guide provides detailed instructions for assembly, operation, maintenance, and troubleshooting to ensure you get the most out of your chair. The noblechairs EPIC is designed for comfort and ergonomics, suitable for both gaming and office environments.
Key features include a robust steel frame, high-density cold foam upholstery, adjustable 4D armrests, and a sophisticated rocking mechanism. It supports users up to 120 kg (265 lbs) and comes with neck and lumbar support cushions.
2. Assembly Instructions
Assembly of the noblechairs EPIC is straightforward, though two people are recommended due to the weight of some components. Please follow these steps carefully.
2.1. Unpacking and Component Check
Carefully unpack all components and verify against the parts list. Ensure no parts are missing or damaged. Keep packaging for future transport or returns.
- Base with casters
- Gas lift cylinder
- Seat base
- Backrest
- Armrests (pre-attached or separate)
- Mechanism plate
- Screws and tools
- Neck and lumbar cushions
2.2. Attaching Casters to the Base
Insert the 60mm casters into the holes on the five-star base. Push firmly until they click into place.
Image: Fully assembled noblechairs EPIC Gaming and Office Chair.
2.3. Installing the Gas Lift
Place the gas lift cylinder into the center hole of the five-star base. Ensure it is seated securely.
2.4. Attaching the Mechanism to the Seat Base
Align the mechanism plate with the pre-drilled holes on the underside of the seat base. Secure it with the provided screws. Ensure the front of the mechanism faces the front of the seat.
2.5. Connecting the Backrest to the Seat Base
Attach the backrest to the seat base using the side brackets and screws. Do not fully tighten until both sides are aligned. Once aligned, tighten all screws securely.
Image: Adjustable backrest and rocking mechanism, allowing recline from 90° to 125°.
2.6. Placing the Seat Assembly onto the Gas Lift
Carefully place the assembled seat and backrest onto the gas lift cylinder. The tapered end of the gas lift should fit snugly into the mechanism on the seat base.
2.7. Attaching Cushions
Attach the neck and lumbar support cushions. The lumbar cushion straps can be threaded through the seatbelt holes in the backrest and secured. The neck cushion typically attaches to the headrest area.
Image: Ergonomic design features, including integrated adjustable lumbar support and memory-foam headrest.
3. Operating Instructions
Your noblechairs EPIC chair offers several adjustment options for personalized comfort.
3.1. Height Adjustment
To adjust the seat height, pull the lever located on the right side of the seat (when seated) upwards. To raise the seat, lift the lever while standing. To lower the seat, lift the lever while seated.
3.2. Backrest Recline
The backrest can be reclined up to 135°. Pull the lever on the right side of the chair (similar to a car seat lever) to adjust the angle. Release the lever to lock the backrest in place.
3.3. Rocking Mechanism
To activate the rocking function, pull the lever on the left side of the seat outwards. Push it inwards to lock the rocking mechanism. The tension of the rocking mechanism can be adjusted by turning the large knob located underneath the seat.
3.4. 4D Armrest Adjustment
The armrests are adjustable in four dimensions:
- Height: Press the button on the side of the armrest and move it up or down.
- Depth (Forward/Backward): Slide the armrest pad forward or backward.
- Angle (Swivel): Rotate the armrest pad left or right.
- Width (In/Out): Slide the entire armrest assembly inwards or outwards.
4. Maintenance
Proper maintenance will extend the lifespan of your noblechairs EPIC chair.
4.1. Cleaning
The chair's PU Faux Leather material is water-resistant and easy to clean.
- For general cleaning, wipe with a soft, damp cloth.
- For stubborn stains, use a mild soap solution and wipe immediately with a clean, damp cloth, then dry thoroughly.
- Avoid harsh chemicals, abrasive cleaners, or solvents, as these can damage the material.
Image: Premium PU Faux Leather material, durable, water-resistant, and easy to clean.
4.2. Fastener Check
Periodically check all screws and fasteners to ensure they are tight. Re-tighten if necessary to prevent wobbling or instability.
4.3. Caster Care
Keep the casters clean and free of debris (hair, dust, etc.) to ensure smooth movement. You may occasionally lubricate the caster axles with a silicone-based spray if they become stiff.
5. Troubleshooting
This section addresses common issues you might encounter with your noblechairs EPIC chair.
| Problem | Possible Cause | Solution |
|---|---|---|
| Chair wobbles or feels unstable. | Loose screws or uneven assembly. | Check and tighten all assembly screws, especially those connecting the backrest to the seat and the mechanism to the seat base. Ensure the gas lift is properly seated in the base. |
| Gas lift does not adjust height. | Lever not fully engaged or gas lift malfunction. | Ensure the height adjustment lever is pulled completely. If the issue persists, the gas lift may need replacement. Contact customer support. |
| Backrest does not recline or lock. | Recline lever not fully engaged or mechanism issue. | Ensure the recline lever is pulled firmly. Check for any obstructions in the recline mechanism. |
| Armrests are stiff or difficult to adjust. | Debris or lack of lubrication. | Clean around the armrest mechanisms. A small amount of silicone spray can be applied to moving parts if necessary. |
| Squeaking noises. | Loose connections or friction between parts. | Tighten all screws. Apply a small amount of silicone spray to pivot points or areas where metal parts rub together. |
6. Specifications
Detailed technical specifications for the noblechairs EPIC Gaming and Office Chair.
| Feature | Detail |
|---|---|
| Model Number | NBL-PU-BLA-002 |
| Color | Black |
| Material | PU Faux Leather (Poliuretano) |
| Product Dimensions (D x W x H) | Approx. 67 cm x 71 cm x 140 cm (26.4 in x 28 in x 55.1 in) |
| Product Weight | 27 kg (59.5 lbs) |
| Maximum Recommended Weight | 120 kg (265 lbs) |
| Backrest Recline Angle | 90° - 135° |
| Armrests | 4D Adjustable |
| Casters | 60mm, suitable for soft or hard floors |
| Assembly Required | Yes |
Image: Detailed dimensions and weight support for the noblechairs EPIC chair.
7. Warranty and Support
noblechairs products are built to high standards and come with a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official noblechairs website.
For technical support, spare parts, or any inquiries not covered in this manual, please contact noblechairs customer service. Contact information can typically be found on the official noblechairs website or on your purchase documentation.
Official Website: www.noblechairs.com
Related documentsNBL-PU-BLA-002
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.