Ardes AR5C40PBH

Download PDFFree PDF. The Save button below keeps a bookmark and private notes in your account.

Ardes AR5C40PBH Pedestal Fan User Manual

Model: AR5C40PBH

1. Introduction

Thank you for choosing the Ardes AR5C40PBH Pedestal Fan. This manual provides important information regarding the safe operation, assembly, maintenance, and troubleshooting of your new fan. Please read this manual thoroughly before using the appliance and keep it for future reference.

Ardes AR5C40PBH Pedestal Fan

Figure 1: Ardes AR5C40PBH Pedestal Fan. This image shows the complete assembly of the fan, featuring its chrome finish, black blades, and sturdy round base.

2. Important Safety Instructions

When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:

  • Read all instructions before using this fan.
  • Use this fan only as described in this manual. Other uses not recommended may cause fire, electric shock, or injury to persons.
  • To protect against electric shock, do not place fan in window, immerse unit, plug or cord in water or spray with liquids.
  • Close supervision is necessary when any appliance is used by or near children.
  • Unplug from outlet when not in use, when moving fan from one location to another, and before cleaning.
  • Do not operate any fan with a damaged cord or plug, or after the fan malfunctions, or has been dropped or damaged in any manner.
  • Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Do not route cord under furniture or appliances. Arrange cord away from traffic area and where it will not be tripped over.
  • Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the fan.
  • Do not operate in the presence of explosive and/or flammable fumes.
  • Do not place fan or any parts near an open flame, cooking or other heating appliance.
  • Do not hang or mount fan on a wall or ceiling.
  • Connect to properly grounded outlets only.
  • This product is intended for household use only.
  • Always place the fan on a stable, flat surface to prevent tipping.
  • Ensure the fan grille is securely in place before operation.

3. Assembly Instructions

Your Ardes AR5C40PBH Pedestal Fan requires minimal assembly. Please follow the steps below carefully.

  1. Unpack Components: Carefully remove all parts from the packaging. Ensure all components listed in the specifications are present.
  2. Assemble the Base: Attach the main pole to the round base. Secure it firmly using the provided screws or locking mechanism.
  3. Attach Fan Head to Pole: Mount the fan motor housing onto the top of the adjustable pole. Tighten any securing knobs or screws to ensure stability.
  4. Install Blades and Grille: Attach the 4 aluminum blades to the motor shaft. Secure the rear grille, then the blades, and finally the front spoke grille. Ensure the grilles are properly aligned and fastened to prevent accidental contact with the blades.
Fan Components for Assembly

Figure 2: Key components of the Ardes AR5C40PBH fan. This image illustrates the black fan blade, the spoke grille, and the stable round base, which are crucial for assembly.

Stable Round Base

Figure 3: Close-up of the fan's stable, elegant round base. This base ensures the fan remains upright and secure during operation.

Once assembled, ensure the fan is placed on a stable, flat surface. The height of the fan can be adjusted between 112 cm and 170 cm to suit your needs.

Adjustable Height Feature

Figure 4: The Ardes AR5C40PBH fan demonstrating its adjustable height feature, ranging from 112 cm to 170 cm, allowing for versatile placement and airflow direction.

4. Operating Instructions

Follow these steps to operate your Ardes AR5C40PBH Pedestal Fan:

  1. Power Connection: Plug the fan's cord into a standard electrical outlet.
  2. Turn On/Off and Speed Control: Locate the control knob or buttons on the fan motor housing. Select your desired speed setting (1, 2, or 3). Setting '0' typically indicates off.
  3. Oscillation Function: To activate the automatic oscillation feature, press down the oscillation knob located on top of the motor housing. To stop oscillation, pull the knob up. This feature allows the fan to sweep air across a wide area.
  4. Adjusting Fan Head Angle: The fan head can be tilted up or down to direct airflow. Loosen the adjustment knob on the side of the fan head, set the desired angle, and then tighten the knob to secure it.
Fan Head and Airflow

Figure 5: Close-up of the fan head, highlighting its powerful 40cm blades designed for high-speed air flow. The image also suggests the direction of air movement.

Wide Oscillation Range

Figure 6: Diagram illustrating the wide oscillation range of the Ardes AR5C40PBH fan, ensuring fresh air circulation throughout the room.

5. Maintenance and Cleaning

Regular cleaning and maintenance will ensure the longevity and optimal performance of your fan.

  • Always unplug the fan from the power outlet before cleaning.
  • Cleaning the Exterior: Use a soft, damp cloth to wipe the exterior surfaces of the fan. Do not use abrasive cleaners or solvents as they may damage the finish.
  • Cleaning the Grille and Blades: Dust can accumulate on the grilles and blades, affecting airflow. Periodically, remove the front grille (if detachable) and gently wipe the blades with a soft, dry cloth. A vacuum cleaner with a brush attachment can also be used to remove dust from the grilles without disassembly.
  • Storage: When not in use for extended periods, store the fan in a cool, dry place, preferably in its original packaging to protect it from dust and damage.
  • No Lubrication Required: The motor is permanently lubricated and requires no additional lubrication.

6. Troubleshooting

If your fan is not operating correctly, please check the following common issues before contacting support:

ProblemPossible CauseSolution
Fan does not turn on.Not plugged in; Power outlet not working; Fan switch is off.Ensure the power cord is securely plugged into a working outlet. Check the circuit breaker. Turn the fan switch to an ON position.
Weak airflow.Fan blades or grille are dirty; Fan is set to a low speed.Clean the fan blades and grilles as per maintenance instructions. Increase the fan speed setting.
Fan makes unusual noise.Loose parts; Fan not on a stable surface; Obstruction in blades.Check for any loose screws or components and tighten them. Ensure the fan is on a flat, stable surface. Unplug the fan and check for any obstructions around the blades.
Oscillation not working.Oscillation knob not engaged.Ensure the oscillation knob on top of the motor housing is pressed down firmly.

7. Specifications

FeatureDetail
BrandArdes
Model NumberAR5C40PBH
Product TypePedestal Fan / Floor Fan
ColourBlack
MaterialAluminum (Blades), Chrome (Base/Pole accents)
Product Dimensions (L x W x H)40 x 45 x 170 cm (max height)
Adjustable Height Range112 cm to 170 cm
Item Weight7.5 Kilograms
Power SourceCorded Electric
Motor Power50 W
Number of Blades4
Blade Diameter40 cm
Speed Settings3
Special FeaturesAutomatic Oscillation, Adjustable Height
Mounting TypeFree Standing
Included ComponentsCord
Fan Dimensions Diagram

Figure 7: Detailed dimensions of the Ardes AR5C40PBH fan, showing its height of 170 cm and base dimensions of approximately 44.5 cm by 40 cm.

8. Warranty and Support

For information regarding the warranty of your Ardes AR5C40PBH Pedestal Fan, please refer to the warranty card included with your purchase or contact the retailer from whom you purchased the product. Warranty terms and conditions may vary by region and retailer.

For technical support or service inquiries, please contact Ardes customer service or your local authorized service center. Contact details can typically be found on the manufacturer's official website or on the product packaging.

© 2024 Ardes. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.