Introduction
This manual provides essential information for the installation, operation, and maintenance of your Gladen RS-X 10 High Performance 10" Subwoofer. Please read this manual thoroughly before using the product to ensure proper function and longevity.
The Gladen RS-X 10 is a high-performance 10-inch subwoofer designed for superior audio reproduction. Key features include:
- Cone: Paper
- Surround: Foam
- Basket: Aluminum
- Spider: Nomex
- Coil Former: Aluminum
What's in the Box
Upon unpacking, please verify that all components are present and undamaged:
- 1 x Gladen RS-X 10 Subwoofer
Setup and Installation
Proper installation is crucial for optimal performance and safety. It is recommended that installation be performed by a qualified professional.
Mounting Considerations
- Ensure the mounting surface is sturdy and free from obstructions.
- The subwoofer is designed for flush mounting. Refer to the specifications for installation diameter (238 mm / 9.37 inch) and depth (140 mm / 5.51 inch).
- Consider the recommended enclosure volumes: 32 liters for a vented box or 22 liters for a sealed box.
Wiring
- Connect the subwoofer to a suitable amplifier capable of delivering the required power (300/450 Watt RMS).
- Ensure correct polarity when connecting the speaker wires to avoid phase issues. The subwoofer has a 4 Ohm impedance.
- Use appropriate gauge wiring to minimize power loss and ensure stable operation.
Operating Instructions
Once installed, the Gladen RS-X 10 Subwoofer operates as part of your audio system. Follow these general guidelines for optimal performance:
- Initial Power-Up: After installation, turn on your audio system at a low volume level. Gradually increase the volume to ensure all components are functioning correctly.
- Break-in Period: Allow a break-in period of several hours of normal listening before operating the subwoofer at high volumes. This allows the suspension components to loosen and perform optimally.
- Volume Control: Adjust the subwoofer's gain and crossover settings on your amplifier or head unit to blend seamlessly with your main speakers. Avoid excessive gain settings that can lead to distortion or damage.
- Listening Environment: The acoustic properties of your vehicle or listening space will affect the subwoofer's sound. Experiment with placement and settings to achieve the desired bass response.
Maintenance
The Gladen RS-X 10 Subwoofer is designed for durability and requires minimal maintenance. Following these simple steps will help ensure its longevity:
- Cleaning: Use a soft, dry cloth to gently wipe down the subwoofer cone and surround. Avoid using harsh chemicals or abrasive cleaners.
- Environmental Protection: Protect the subwoofer from extreme temperatures, direct sunlight, and moisture. While not waterproof, it is built to withstand typical automotive environments.
- Regular Inspection: Periodically check all wiring connections to ensure they are secure and free from corrosion. Inspect the cone and surround for any signs of damage.
Troubleshooting
If you experience issues with your Gladen RS-X 10 Subwoofer, refer to the following common troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| No Sound from Subwoofer |
|
|
| Distorted Sound |
|
|
| Weak Bass Output |
|
|
If these steps do not resolve the issue, please contact Gladen customer support or a qualified audio technician.
Specifications
| Feature | Detail |
|---|---|
| Model Name | RS-X-10 |
| Speaker Type | Subwoofer |
| Subwoofer Diameter | 10 Inches (25 cm) |
| Power Handling (RMS/Peak) | 300W / 450W |
| Nominal Impedance | 4 Ohms |
| DC Resistance (Re) | 3.74 Ohms |
| Resonance Frequency (Fs) | 35.57 Hz |
| Voice Coil Diameter | 2.5 inches |
| Xmax | 10 mm |
| Moving Mass (Mms) | 121.6 g |
| Effective Piston Area (Sd) | 346 cm² |
| Mechanical Resistance (Rms) | 4.79 Kg/s |
| Compliance (Cms) | 0.16 mm/N |
| Force Factor (Bl) | 13.82 Tm |
| Equivalent Air Volume (Vas) | 27.69 dm³ |
| Recommended Vented Box Volume | 32 liters |
| Recommended Sealed Box Volume | 22 liters |
| External Diameter | 263 mm / 10.35 inch |
| Installation Diameter | 238 mm / 9.37 inch |
| Installation Depth | 140 mm / 5.51 inch |
| Magnet Diameter | 162 mm / 6.38 inch |
| Cone Material | Paper |
| Surround Material | Foam |
| Basket Type | Vented Die-Cast Aluminum |
| Spider Material | Nomex |
| Dust Cap | PP-dust cap |
| Item Weight | 13 Pounds |
| Mounting Type | Flush Mount |
| Connectivity Technology | Wired |
| Waterproof | No |
Product Images
Warranty and Support
The Gladen RS-X 10 Subwoofer comes with a Limited Warranty. For specific terms and conditions of this warranty, please refer to the documentation included with your purchase or contact Gladen customer support.
Extended protection plans may be available for purchase separately to provide additional coverage beyond the standard manufacturer's warranty. Please check with your retailer for details on available plans.
For technical support, service, or warranty claims, please contact Gladen customer service through their official website or the contact information provided with your product.
