Introduction
This manual provides comprehensive instructions for the safe and effective use of your Mr.Go 8-inch Ultra-Fun LED Glowing Ball Light. Please read this manual thoroughly before operation and retain it for future reference.
Important Safety Information
- Do not attempt to open or modify the device.
- Keep away from extreme temperatures and direct sunlight for prolonged periods.
- Ensure the charging port is securely closed when not charging, especially when used near water.
- Use only the provided AC adapter for charging.
- Keep out of reach of small children when charging or if any parts become loose.
Package Contents
- 1 x 8" LED Light Glow Ball
- 1 x Charger Adapter
- 1 x IR Remote Control
- 1 x User Manual (this document)
Image: The Mr.Go 8-inch LED Glowing Ball Light package contents, showing the light ball, remote control, charger, and user manual.
Setup
1. Initial Charge
Your LED Glowing Ball Light comes with a built-in rechargeable Lithium battery. Before first use, fully charge the device.
- Locate the charging port on the base of the sphere. Open the waterproof cover.
- Connect the provided AC adapter to the charging port and plug it into a standard electrical outlet.
- The light will indicate when it is fully charged (e.g., by glowing green). Charging typically takes 1.5-2 hours.
- Once fully charged, disconnect the charger and securely close the waterproof cover.
Image: The underside of the Mr.Go LED Glowing Ball Light, highlighting the charging port with its waterproof cover.
Operating Instructions
1. Power On/Off
Use the ON/OFF buttons on the IR Remote Control to power the light on or off. Alternatively, a physical ON/OFF switch is located on the bottom of the LED Sphere.
2. Remote Control Functions
The included IR remote control allows for various adjustments:
- On/Off: Power the light on or off.
- 16 Fixed Color Selections: Choose from 16 distinct RGB colors.
- Brightness Adjustment: Increase or decrease brightness (8 levels available).
- 4 Transition Effects: Select from Flash, Strobe, Fade, and Smooth modes for dynamic color changes.
- Rhythm/Speed Control: Adjust the speed of the transition effects.
Note: A single remote can control multiple LED lights if they are in close proximity.
Image: The remote control for the Mr.Go LED Glowing Ball Light, detailing buttons for power, 16 static colors, brightness adjustment, and dynamic lighting modes (Flash, Strobe, Fade, Smooth).
Video: Demonstration of the Mr.Go Rechargeable LED Ball Light, showcasing its remote control functionality, dimmable feature, 16 RGB colors, and color-changing capabilities. The video also highlights its waterproof design.
Video: A comprehensive overview of the Mr.Go LED Ball Light, demonstrating its globe orb design, remote control operation, various color-changing options, rechargeable battery, and waterproof features.
Maintenance
1. Cleaning
The PE plastic material is easy to clean. Use a soft, damp cloth to wipe the surface. Avoid abrasive cleaners.
2. Waterproofing
The sphere is IP65 waterproof and can be floated in a pool for short periods. Ensure the charging port cover is tightly sealed before exposing to water. Do not submerge or hold the light under water for extended durations.
3. Storage
Store the light in a cool, dry place when not in use. Fully charge the battery before long-term storage to maintain battery health.
Image: Several Mr.Go LED Glowing Ball Lights floating in a pool, demonstrating their waterproof capability and suitability for outdoor use.
Troubleshooting
1. Light Does Not Turn On
- Check Battery: Ensure the unit is fully charged. Connect to the AC adapter and check if the charging indicator light is active.
- Remote Control: Verify the remote control battery is functional. Point the remote directly at the light.
- Power Switch: Ensure the physical ON/OFF switch on the base is in the 'ON' position.
2. Remote Control Not Responding
- Line of Sight: Ensure there is a clear line of sight between the remote and the light's sensor.
- Remote Battery: Replace the remote control battery if necessary.
- Distance: The remote control has a working range of approximately 16 to 26 feet. Reduce distance if experiencing issues.
3. Short Battery Life
- Battery life varies by color and brightness settings (8 to 48 hours). Brighter settings and certain colors consume more power.
- Ensure the unit is fully charged (1.5-2 hours).
- Over time, rechargeable batteries may experience reduced capacity. This is normal wear and tear.
Specifications
| Feature | Detail |
|---|---|
| Brand | Mr.Go |
| Model Name | CQ-B202 |
| Product Dimensions | 8"D x 8"W x 7.5"H |
| Item Weight | 1.3 Pounds |
| Material | Polyethylene (PE) |
| Light Source Type | LED |
| Light Color | 16 colors (e.g. white, red, green, blue, yellow, pink, purple...) |
| Brightness Levels | 8 |
| Lighting Modes | 4 Multi Color Functions Modes (Flash, Strobe, Fade, Smooth) plus Rhythm Control |
| Power Source | Rechargeable Lithium Polymer battery & AC adapter |
| Battery Capacity | 1000mAh Li-on |
| Charging Time | 1.5-2 hours |
| Operating Time | 8 to 48 hours (varies by color and brightness) |
| Water Resistance Level | IP65 Waterproof |
| Control Method | IR Remote Control & Push button |
| Voltage | 5 Volts |
| Wattage | 1.5 watts |
| Certification | CE Certified |
| UPC | 756040289461 |
Warranty and Support
Warranty Information
This product is covered by a standard manufacturer's warranty. Please refer to the product packaging or contact Mr.Go customer service for specific warranty terms and conditions.
Customer Support
For any questions, technical assistance, or warranty claims, please contact Mr.Go customer support. Contact details can typically be found on the product packaging or the official Mr.Go website. You may also visit the Mr.Go Store on Amazon for more information.