Introduction
Thank you for choosing the Aduro U-Drive Pro HD DVR Dash Cam. This device is designed to record video footage while driving, providing a record of events on the road. It features a 2.4-inch HD display, 135° wide-angle lens, and supports various recording modes including loop recording, ignition detection, motion detection, and vibration detection. This manual provides detailed instructions for the proper installation, operation, and maintenance of your dash cam.
Package Contents
Please verify that all items are present in the package:
- Aduro U-Drive Pro HD DVR Dash Cam
- Suction Mount
- MicroSD Card (Note: Capacity may vary or sold separately. Supports up to 32GB TF card.)
- User Manual (This document)
- Warranty Card
Product Overview
The Aduro U-Drive Pro HD DVR Dash Cam is a compact device designed for in-car video recording. It features a front-facing camera with a wide-angle lens and a display screen for viewing recordings and adjusting settings.
Figure 1: Front view of the Aduro U-Drive Pro HD DVR Dash Cam, showing the lens, infrared LEDs, and the Aduro logo. The suction mount is attached to the top.
Figure 2: Rear view of the dash cam, highlighting the 2.4-inch HD display screen and control buttons on the sides. The screen shows a live view of the road ahead.
Key Features:
- Display: 2.4-inch HD screen for real-time viewing and playback.
- Camera Angle: 135° wide-angle lens with a rotatable arm for optimal positioning.
- Video Resolution: Supports 480p, 720p, and 1080p at 30 frames per second (fps).
- Image Resolution: Up to 5 Megapixels (5M).
- Storage: External storage support for MicroSD (TF) cards up to 32GB.
- Recording Modes: Loop Recording, Ignition Detection, Motion Detection, Vibration Detection (Parking Mode).
- Audio: One-button audio recording on/off. Manually adjustable microphone sensitivity.
- Image Enhancement: Low light compensation, adjustable brightness, contrast, and white balance settings.
Setup
1. MicroSD Card Installation
- Ensure the dash cam is powered off.
- Locate the MicroSD card slot on the device.
- Insert a compatible MicroSD (TF) card (up to 32GB, Class 10 recommended) into the slot until it clicks into place.
- To remove, gently push the card in until it clicks, then release to eject.
Note: The MicroSD card is essential for recording and storing footage. Format the card within the dash cam's settings menu before first use to ensure proper operation.
2. Mounting the Dash Cam
- Clean the desired area on your windshield thoroughly.
- Attach the suction mount to the dash cam.
- Press the suction cup firmly against the windshield and engage the locking lever to secure it.
- Adjust the camera angle using the rotatable arm to ensure a clear view of the road.
Figure 3: The dash cam mounted on a car windshield, positioned to capture the road ahead. The screen displays a live feed.
3. Power Connection
- Connect the provided car charger to the dash cam's power input port.
- Plug the other end of the car charger into your vehicle's 12V power outlet (cigarette lighter socket).
- Route the power cable neatly along the windshield trim to avoid obstructing your view or interfering with driving.
Note: The dash cam is designed to automatically power on and begin recording when your vehicle's engine starts, and power off shortly after the engine is turned off, thanks to its ignition detection feature.
Operating Instructions
Basic Operation
- Power On/Off: The device typically powers on automatically with vehicle ignition. To manually power on/off, press and hold the Power button.
- Recording Start/Stop: Recording usually starts automatically when the device powers on. A red indicator light or icon on the screen will confirm recording is active. Press the Record button to manually start or stop recording.
- Menu Navigation: Use the Up/Down buttons to navigate through menu options and the OK button to confirm selections.
Recording Modes and Features
- Loop Recording:
This feature ensures continuous recording by overwriting the oldest unlocked video files when the MicroSD card is full. Video segments are typically recorded in 1, 3, or 5-minute intervals. Adjust the loop recording duration in the settings menu.
- Ignition Detection:
The dash cam automatically turns on and begins recording when the vehicle's engine starts. It will automatically turn off shortly after the engine is switched off.
- Motion Detection:
When enabled, the device will automatically pause video recording 30 seconds after the vehicle stops moving. Recording automatically resumes when the vehicle starts to move again. This feature is useful for conserving storage space when stationary.
- Vibration Detection (Parking Mode):
In parking mode, if a vibration or impact is detected while the vehicle is parked and the engine is off, the dash cam will automatically power on and begin recording for a short period. This footage is typically locked to prevent overwriting.
- Audio Recording:
You can enable or disable audio recording with a dedicated button or through the settings menu for privacy. Microphone sensitivity can also be adjusted.
- Picture Taking:
Press the designated button to capture still images at a resolution of 5M pixels.
Settings Adjustment
Access the settings menu to customize various parameters:
- Video Resolution: Select 480p, 720p, or 1080p.
- Exposure/WDR: Adjust for optimal brightness in varying light conditions.
- White Balance: Set to automatic or specific light conditions.
- Brightness/Contrast: Manually adjust display and recording visual quality.
- Date/Time Stamp: Enable or disable the display of date and time on recordings.
- Language: Select your preferred interface language (English, Spanish, Portuguese, Russian, Simplified Chinese, Traditional Chinese are supported).
- Format SD Card: Erase all data on the MicroSD card. Perform this regularly to maintain card health.
Maintenance
- Cleaning:
Gently wipe the camera lens and screen with a soft, lint-free cloth. Avoid using abrasive cleaners or solvents that could damage the surfaces.
- MicroSD Card Care:
Regularly format the MicroSD card (at least once a month) through the dash cam's settings to prevent data corruption and ensure optimal recording performance. Replace the card if you experience frequent errors or recording issues.
- Temperature:
Avoid exposing the dash cam to extreme temperatures for extended periods, as this can affect battery life and device performance. If possible, remove the dash cam from the windshield when parking in direct sunlight during hot weather.
Troubleshooting
| Problem | Possible Solution |
|---|---|
| Dash cam does not power on. |
|
| Recording stops unexpectedly or "No Card" error. |
|
| Video footage is blurry or unclear. |
|
| Dash cam gets hot during operation. | It is normal for the dash cam to become warm during operation, especially during continuous recording or in hot environments. If it becomes excessively hot or shuts down, discontinue use and contact support. |
Specifications
| Feature | Detail |
|---|---|
| Model Name | U-Drive Pro |
| Item Model Number | AA-DVC250-07 |
| Display Type | LCD |
| Screen Size | 2.4 Inches |
| Video Capture Resolution | 1080p (also supports 720p, 480p at 30fps) |
| Camera View Angle | 135° |
| External Storage Support | Up to 32GB TF (MicroSD) card |
| Connectivity Technology | USB |
| Mounting Type | Suction Mount |
| Color | Silver |
| Item Weight | 9.6 ounces |
| Package Dimensions | 6.97 x 5.16 x 3.58 inches |
Warranty and Support
Aduro provides a lifetime limited warranty for the U-Drive Pro HD DVR Dash Cam. For any questions, technical assistance, or warranty claims, please contact Aduro's customer service. Our friendly 24/7 US customer service team is available to assist you.
Please refer to the warranty card included in your package for specific terms and conditions, or visit the official Aduro website for contact information.