Introduction
Thank you for purchasing the Paladone Star Wars Lenticular Wall Clock. This clock features a unique lenticular surface that creates a 3D effect, depicting a star-studded galaxy backdrop. The hour hand is designed as the iconic Death Star, and the minute hand as a TIE Fighter, providing a dynamic visual experience as they move. This manual provides essential information for the safe and proper use of your new wall clock.
Image: Front view of the Paladone Star Wars Lenticular Wall Clock. The clock face is black with white streaks resembling stars. The hour hand is a grey Death Star, and the minute hand is a blue TIE Fighter.
Safety Information
- Keep batteries out of reach of children.
- Do not mix old and new batteries, or different types of batteries.
- Remove exhausted batteries promptly to prevent leakage.
- Dispose of batteries according to local regulations.
- Do not expose the clock to extreme temperatures, direct sunlight, or high humidity.
- This product is for indoor use only.
Package Contents
Please check that all items are present in the package:
- 1 x Paladone Star Wars Lenticular Wall Clock (Model: PP2964SW)
Setup
1. Battery Installation
- Locate the battery compartment on the back of the clock.
- Insert one (1) AA battery (not included) into the compartment, ensuring the correct polarity (+/-) as indicated.
- Close the battery compartment cover securely.
2. Setting the Time
- Locate the time setting knob on the back of the clock, usually a small wheel or dial.
- Gently turn the knob in either direction until the Death Star (hour hand) and TIE Fighter (minute hand) indicate the correct time.
- Avoid forcing the hands directly. Always use the setting knob.
3. Mounting the Clock
Image: Back view of the Paladone Star Wars Lenticular Wall Clock. The central mechanism shows a battery compartment for one AA battery and a small wheel for time adjustment. A hanging hook is visible at the top.
- Choose a suitable location on a flat wall for mounting.
- Install a wall screw or hook (not included) appropriate for the clock's weight (approximately 0.29 kg). Ensure it is securely fastened into the wall.
- Hang the clock using the integrated wall mounting fixture located on the back of the clock.
- Ensure the clock is level and securely seated on the wall fixture.
Operating
Once the battery is installed and the time is set, the clock will begin to operate automatically. The quartz movement ensures accurate timekeeping.
- The TIE Fighter (minute hand) will rotate around the clock face, completing a full rotation every hour.
- The Death Star (hour hand) will rotate more slowly, completing a full rotation every twelve hours.
- The lenticular surface provides a dynamic 3D effect, making the background appear to shift as you view the clock from different angles.
Image: The Paladone Star Wars Lenticular Wall Clock displayed against a dark, plain background, highlighting its visual effect.
Maintenance
Cleaning
- To clean the clock, gently wipe the surface with a soft, dry cloth.
- Do not use abrasive cleaners, solvents, or chemical sprays, as these may damage the finish or the lenticular surface.
Battery Replacement
- When the clock hands begin to slow down or stop, it is time to replace the battery.
- Follow the battery installation steps outlined in the 'Setup' section to replace the AA battery.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Clock not working / Hands not moving | Battery is dead or incorrectly installed. | Check battery polarity or replace with a new AA battery. |
| Time is inaccurate | Low battery power. | Replace the AA battery. |
| Hands are stuck or rubbing | Hands may have shifted during transport or installation. | Gently adjust the time using the setting knob on the back. If hands are visibly bent or damaged, contact customer support. |
Specifications
- Brand: Paladone
- Model Number: PP2964SW
- Product Dimensions: 8.94"W x 8.94"H (approximately 22.7 cm x 22.7 cm)
- Item Weight: 0.29 Kilograms
- Color: Black
- Display Type: Analog
- Power Source: Battery Powered (1 x AA battery, not included)
- Shape: Round
- Material: Plastic (Frame Material: Glass)
- Theme: Star Wars
- Mounting Type: Wall Mount
- Watch Movement: Quartz
Warranty and Support
Specific warranty details for this product are not provided in this manual. For warranty information, technical support, or replacement parts, please contact Paladone customer service directly or visit their official website. Please retain your proof of purchase for any warranty claims.
Manufacturer: Paladone
Website: www.paladone.com