Kobalt B01E7JQSSC

Download PDF
Contents

Kobalt 0.065-inch Trimmer Line Instruction Manual

Model: B01E7JQSSC

Product Overview

This manual provides instructions for the Kobalt 0.065-inch Trimmer Line, a replacement spool designed for compatible string trimmers. This product is a 3-count dual-line replacement spool specifically engineered to fit the Kobalt 40V Max Dual Line Trimmer (KST-120X).

Three blue spools of Kobalt 0.065-inch trimmer line

Image: Three individual spools of Kobalt 0.065-inch blue trimmer line, ready for installation.

Setup and Installation

Proper installation of the trimmer line spool is crucial for optimal performance and safety. This product is designed for use with the Kobalt 40V Max Dual Line Trimmer (KST-120X).

Replacing the Trimmer Line Spool:

  1. Ensure Safety: Before beginning, always disconnect the trimmer from its power source (remove the battery pack for cordless models) to prevent accidental startup.
  2. Remove Trimmer Head Cap: Locate the trimmer head and press the tabs or twist the cap to remove it. This will expose the old spool.
  3. Remove Old Spool: Carefully lift out the old, empty, or damaged trimmer line spool. Note its orientation for correct installation of the new spool.
  4. Install New Spool: Place the new Kobalt 0.065-inch trimmer line spool into the trimmer head. Ensure the line ends are threaded through the eyelets on the trimmer head. The spool should fit snugly.
  5. Replace Trimmer Head Cap: Align the cap with the trimmer head and press or twist it firmly until it locks into place.
  6. Verify Installation: Gently pull on the trimmer lines to ensure they are properly seated and can feed freely.

Operating Guidelines

While the trimmer line itself does not have operational controls, its effective use depends on proper trimmer operation. Always refer to your specific Kobalt trimmer's instruction manual for detailed operating procedures and safety warnings.

  • Line Feeding: This dual-line spool is designed for automatic or bump-feed systems. If your trimmer has a bump-feed head, lightly tap the head on the ground while the trimmer is running to advance the line.
  • Optimal Cutting: For best results, use the tip of the trimmer line to cut grass and weeds. Avoid digging the line into hard surfaces or thick brush, as this can cause premature line breakage and wear.
  • Safety Precautions: Always wear appropriate personal protective equipment (PPE), including eye protection, long pants, and sturdy footwear, when operating a string trimmer. Keep bystanders and pets at a safe distance.

Maintenance

Proper care and storage of your trimmer line spools will extend their lifespan and ensure readiness for use.

  • Storage: Store unused trimmer line spools in a cool, dry place away from direct sunlight and extreme temperatures. This helps prevent the line from becoming brittle.
  • Inspection: Before each use, inspect the installed trimmer line for any signs of wear, fraying, or damage. Replace the spool if the line appears compromised.
  • Cleaning: Keep the trimmer head free of grass clippings and debris to ensure smooth line feeding.

Troubleshooting

This section addresses common issues related to trimmer line performance.

ProblemPossible CauseSolution
Line not feedingLine tangled on spool; debris in trimmer head; incorrect spool installation.Remove spool, untangle line, clear debris, re-install spool correctly. Ensure line is not stuck.
Line breaks frequentlyHitting hard surfaces; old/brittle line; incorrect line diameter for trimmer; excessive force.Avoid hitting hard objects. Replace with a fresh spool. Ensure this 0.065-inch line is compatible with your trimmer. Use proper cutting technique.
Trimmer vibrates excessivelyUneven line length; damaged trimmer head.Ensure both lines are of equal length. Inspect trimmer head for damage and replace if necessary.

Specifications

FeatureDetail
BrandKobalt
Product TypeTrimmer Line Spool (Replacement)
Line Diameter0.065 inches
Spool Count3 Count
Line TypeDual Line
CompatibilityKobalt 40V Max Dual Line Trimmer (KST-120X)
Item Weight (per spool)Approximately 0.07 Kilograms (2.39 ounces)
Package Dimensions2.64 x 2.13 x 2.13 inches
UPC643504038584
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.