1. Introduction
Thank you for choosing the Duravit Ketho Wall-Mounted Vanity Unit, model KT6629L7979. This manual provides essential information for the safe installation, operation, and maintenance of your new vanity unit. Please read these instructions carefully before beginning installation and retain them for future reference.
This unit is designed for use with the Vero #070350 washbasin (not included). Proper installation is crucial for the stability and longevity of the product.
2. Important Safety Instructions
- Always ensure the wall structure is suitable for supporting the weight of the vanity unit and its contents. Consult a professional if unsure.
- Use appropriate wall fixings for your specific wall type (e.g., solid brick, plasterboard). Fixings are typically not supplied and must be purchased separately.
- Do not overtighten screws during assembly, as this may damage the material.
- Keep small parts and packaging materials away from children to prevent choking hazards.
- Ensure all plumbing connections are correctly sealed to prevent leaks.
- Avoid placing excessively heavy items inside the unit or on top of the washbasin.
3. Package Contents
Please check that all components are present and undamaged before beginning installation. If any parts are missing or damaged, contact your supplier immediately.
- 1 x Duravit Ketho Wall-Mounted Vanity Unit (KT6629L7979)
- 1 x Door (left-hinged)
- Hinges and mounting hardware for the door
- Assembly instructions (this manual)
Note: The washbasin (Vero #070350) and faucet are sold separately and are not included with this vanity unit.
4. Setup and Installation
Installation should be performed by a qualified professional or a competent person with experience in bathroom furniture installation. Ensure all local building and plumbing codes are followed.
4.1. Tools Required
- Measuring tape
- Pencil
- Spirit level
- Drill with appropriate drill bits for wall type
- Screwdriver set (Phillips and flathead)
- Adjustable wrench (for plumbing connections)
- Silicone sealant (for sealing washbasin)
- Safety glasses and gloves
4.2. Step-by-Step Installation
- Prepare the Wall: Identify the desired mounting height. Ensure there are no hidden pipes or electrical wires in the drilling area. Mark the drilling points for the wall brackets according to the unit's dimensions and the washbasin's requirements.
- Install Wall Brackets: Drill holes at the marked points and insert appropriate wall plugs. Secure the wall brackets firmly to the wall using suitable screws. Use a spirit level to ensure they are perfectly horizontal.
- Mount the Vanity Unit: Carefully lift the vanity unit and hook it onto the installed wall brackets. Ensure it is securely seated and level. Adjust if necessary.
- Install the Door: Attach the hinges to the door and then to the vanity unit, ensuring the door opens and closes smoothly. The door is left-hinged. Adjust the hinges for proper alignment and gap.
- Install the Washbasin (Sold Separately): Place the Vero #070350 washbasin onto the vanity unit. Connect the faucet and drain according to their respective instructions. Apply a bead of silicone sealant around the edges where the washbasin meets the vanity unit and the wall to prevent water ingress.
- Final Checks: Open and close the door to ensure smooth operation. Check all connections for leaks. Clean any excess sealant.
Figure 1: Assembled Duravit Ketho Wall-Mounted Vanity Unit. This image shows the vanity unit with a compatible washbasin and faucet installed, illustrating its intended appearance and function in a bathroom setting. The unit features a natural walnut finish and a single door.
Figure 2: Duravit Ketho Wall-Mounted Vanity Unit with key dimensions. The image highlights the unit's width (45 cm), depth (22.5 cm), and height (55 cm), providing essential measurements for planning and installation.
5. Operating Instructions
The Duravit Ketho vanity unit is designed for storing bathroom essentials. The single door opens to the left, providing access to the interior storage space.
- Opening/Closing the Door: Gently pull the door handle to open. Push the door gently to close. Avoid slamming the door to prevent damage to hinges and the unit.
- Storage: Utilize the internal space for toiletries, cleaning supplies, or other bathroom items. Ensure items are placed securely to prevent them from falling out when the door is opened.
- Weight Limit: Do not overload the unit. Distribute weight evenly.
6. Maintenance and Care
Regular cleaning and proper care will help maintain the appearance and extend the lifespan of your Duravit Ketho vanity unit.
- Daily Cleaning: Wipe surfaces with a soft, damp cloth. For stubborn marks, use a mild, non-abrasive cleaner specifically designed for bathroom furniture.
- Avoid Harsh Chemicals: Do not use abrasive cleaners, scouring pads, ammonia-based products, or solvents, as these can damage the finish.
- Spills: Immediately wipe up any water spills or splashes to prevent water damage, especially on the natural walnut finish.
- Hinge Maintenance: Periodically check hinges for tightness and lubricate with a silicone-based spray if they become stiff or squeaky.
- Ventilation: Ensure adequate ventilation in the bathroom to prevent excessive moisture buildup, which can affect wooden furniture.
7. Troubleshooting
This section addresses common issues you might encounter with your vanity unit.
| Problem | Possible Cause | Solution |
|---|---|---|
| Door does not close properly or is misaligned. | Loose or improperly adjusted hinges. | Adjust the hinge screws to align the door. Refer to hinge manufacturer's instructions for specific adjustment methods. |
| Unit feels wobbly or unstable. | Improper wall mounting or loose wall fixings. | Ensure wall brackets are securely fastened and the unit is properly seated. Re-tighten wall fixings if necessary. If the wall is not strong enough, reinforce it or consult a professional. |
| Water stains or discoloration on the finish. | Water spills not wiped immediately; use of harsh cleaners. | Wipe up spills immediately. Use only recommended mild cleaners. For existing stains, consult a furniture care specialist. |
8. Product Specifications
Key technical details for the Duravit Ketho Wall-Mounted Vanity Unit KT6629L7979:
| Brand | Duravit |
| Model Number | KT6629L7979 |
| Dimensions (W x D x H) | 45 cm x 22.5 cm x 55 cm (approx. 17.7 x 8.9 x 21.7 inches) |
| Color | Natural Walnut Decoration |
| Door Configuration | 1 door, left-hinged |
| Compatibility | Designed for Vero #070350 washbasin (not included) |
| Mounting Type | Wall-mounted |
| Item Weight | 13.5 Kilograms (approx. 29.8 lbs) |
9. Warranty Information and Customer Support
Duravit products are manufactured to high-quality standards. For specific warranty details, please refer to the warranty card included with your purchase or visit the official Duravit website. Keep your proof of purchase for any warranty claims.
For technical assistance, spare parts, or further inquiries, please contact Duravit customer support or your authorized dealer. Contact information can typically be found on the Duravit website or on your purchase documentation.
