Product Overview
The PRO-ELEC 5' Aquastop Safety Inlet Supply Hose is designed to provide a secure and reliable water connection for various appliances, particularly those requiring a safety shut-off feature. This hose is suitable for both home plumbing and commercial building applications, ensuring protection against leaks and water damage.
Image: The PRO-ELEC Aquastop Safety Inlet Supply Hose, showing its corrugated gray hose body and two distinct end connectors. One end features an angled, threaded metal connector, while the other has a larger, gray plastic housing with a straight metal threaded connector, indicative of the Aquastop safety mechanism.
Safety Information
Always read and understand all instructions before installation and use. Failure to follow these instructions may result in property damage or personal injury.
- Ensure water supply is turned off before connecting or disconnecting the hose.
- Do not overtighten connections, as this may damage threads or seals.
- Regularly inspect the hose for signs of wear, cracks, or leaks. Replace immediately if damage is observed.
- This hose is designed for water supply only. Do not use for other liquids or gases.
- Keep out of reach of children.
Setup and Installation
- Prepare the Connection Points: Ensure the water inlet valve and the appliance's water inlet port are clean and free of debris.
- Connect to Water Supply: Attach the angled metal connector end of the hose to the water supply valve. Hand-tighten first, then use a wrench to tighten an additional quarter to half turn. Do not overtighten.
- Connect to Appliance: Attach the Aquastop safety mechanism end (the larger gray plastic housing) to the water inlet port of your appliance (e.g., washing machine, dishwasher). Hand-tighten first, then use a wrench to tighten an additional quarter to half turn.
- Check for Leaks: Slowly turn on the water supply valve. Carefully inspect both connection points for any signs of leaks. If leaks are present, turn off the water, re-tighten the connection, and check again.
- Position the Hose: Ensure the hose is not kinked or sharply bent, which could restrict water flow or damage the hose.
Operating Instructions
Once installed, the PRO-ELEC Aquastop Safety Inlet Supply Hose operates automatically. The integrated Aquastop mechanism is designed to detect leaks and automatically shut off the water supply to prevent flooding. No manual operation is required for its safety function.
To use your appliance, simply follow the appliance's own operating instructions. The hose will provide the necessary water supply.
Maintenance
- Regular Inspection: Periodically inspect the entire length of the hose, especially near the connectors, for any signs of wear, cracks, bulges, or corrosion. It is recommended to inspect at least once every six months.
- Clean Connections: If mineral deposits or debris accumulate around the connections, turn off the water supply, disconnect the hose, and clean the threads and washers.
- Replace When Necessary: Hoses have a finite lifespan. It is generally recommended to replace supply hoses every 5-7 years, or sooner if any damage is detected, to prevent potential leaks.
- Winterization (if applicable): If the hose is installed in an area subject to freezing temperatures, ensure it is properly drained and disconnected during winter months to prevent damage from ice expansion.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Water Leak at Connection | Loose connection, damaged washer, cross-threaded connection. | Turn off water supply. Re-tighten connection. Check and replace rubber washer if damaged. Ensure threads are aligned correctly. |
| No Water Flow | Water supply valve is off, hose is kinked, Aquastop mechanism activated. | Ensure water supply valve is fully open. Straighten any kinks in the hose. If Aquastop is activated (often indicated by a visible red indicator or a click), the hose needs replacement as it has detected a leak. |
| Hose Appears Damaged | Physical wear and tear, age, exposure to harsh conditions. | Immediately turn off water supply and replace the hose with a new one. Do not attempt to repair a damaged hose. |
Specifications
- Model: 140-1473
- Brand: PRO-ELEC
- Material: Rubber
- Color: Gray
- Item Length: 5 Feet (approximately 1.52 meters)
- UPC: 636501613045
- Specific Uses: Home plumbing, commercial buildings
Warranty and Support
For information regarding warranty coverage or technical support for your PRO-ELEC Aquastop Safety Inlet Supply Hose, please refer to the original purchase documentation or contact the retailer where the product was purchased. Specific warranty terms may vary.
For general inquiries or further assistance, please visit the PRO-ELEC official website or contact their customer service department.
