1byone 703US-0003

1byone Blood Pressure Monitor Power Adapter Instruction Manual

Model: 703US-0003

Introduction

This manual provides comprehensive instructions for the safe and effective use of your 1byone Blood Pressure Monitor Power Adapter, Model 703US-0003. Please read this manual thoroughly before using the product and retain it for future reference. This adapter is designed to provide a stable power source for compatible 1byone Blood Pressure Monitors, eliminating the need for batteries.

Product Overview

The 1byone Blood Pressure Monitor Power Adapter is an AC adapter specifically designed to power 1byone Upper Arm Bluetooth Blood Pressure Monitors. It features a durable cable and a compact design for convenience.

  • Compatibility: Designed for 1byone Blood Pressure Monitors.
  • Cable Length: Approximately 1.45 meters (4.76 feet) for flexible placement.
  • Safety Features: Includes automatic high temperature shut-off and protection against short circuits and overvoltage.
1byone Blood Pressure Monitor Power Adapter

Image: The 1byone Blood Pressure Monitor Power Adapter, showing its compact design and cable.

Safety Information

To ensure safe operation and prevent damage, please observe the following safety guidelines:

  • Use only with compatible 1byone Blood Pressure Monitors.
  • Do not expose the adapter to water or excessive moisture.
  • Avoid dropping or subjecting the adapter to strong impacts.
  • Do not attempt to disassemble or modify the adapter.
  • Ensure the power outlet voltage matches the adapter's input specifications.
  • The adapter is equipped with automatic high temperature shut-off, short circuit protection, and overvoltage protection for user safety.
  • Unplug the adapter from the power outlet when not in use for extended periods.

Setup

Follow these steps to set up your power adapter with your blood pressure monitor:

  1. Locate the power input port on your 1byone Blood Pressure Monitor.
  2. Insert the adapter's output plug firmly into the monitor's power input port.
  3. Plug the adapter's AC prongs into a standard electrical wall outlet (100-240V AC).
  4. Once connected, your blood pressure monitor is ready for use, powered by the adapter.

Note: Ensure all connections are secure before operating the blood pressure monitor.

Operating Instructions

The 1byone Blood Pressure Monitor Power Adapter functions by providing continuous power to your compatible blood pressure monitor. Once properly connected as described in the "Setup" section, the adapter will supply power, allowing your monitor to operate without batteries.

  • Ensure the adapter is plugged into both the monitor and a live electrical outlet.
  • Refer to your specific 1byone Blood Pressure Monitor's instruction manual for details on how to operate the monitor itself.
  • The adapter does not have any user-operable controls. Its function is automatic power delivery.

Maintenance

Proper care and maintenance will extend the life of your power adapter:

  • Cleaning: Disconnect the adapter from the power outlet and the monitor before cleaning. Wipe the adapter with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
  • Storage: Store the adapter in a cool, dry place away from direct sunlight and extreme temperatures. Avoid wrapping the cable too tightly around the adapter.
  • Inspection: Periodically inspect the adapter and cable for any signs of damage, such as cuts, fraying, or bent prongs. If damage is found, discontinue use and contact customer support.

Troubleshooting

If you encounter issues with your power adapter, refer to the following common problems and solutions:

Problem Possible Cause Solution
Monitor does not power on when connected to adapter.
  • Adapter not fully plugged into monitor.
  • Adapter not fully plugged into wall outlet.
  • Wall outlet is not supplying power.
  • Adapter or monitor is faulty.
  • Ensure the adapter plug is securely inserted into the monitor's power port.
  • Ensure the adapter is firmly plugged into a working wall outlet.
  • Test the wall outlet with another device.
  • If the issue persists, contact 1byone customer support.
Adapter feels unusually hot.
  • Overload or internal fault.
  • Poor ventilation.
  • Immediately unplug the adapter from the wall outlet and the monitor.
  • Allow it to cool down.
  • Ensure it is used in a well-ventilated area.
  • If overheating continues, discontinue use and contact 1byone customer support.
    • Visit the 1byone Store

Specifications

Model Number 703US-0003
Input 100-240V AC, 50/60Hz
Output 6V, 1A (1000 mA)
Cable Length 1.45 meters (4.76 feet)
Weight Approximately 64 grams (0.14 lbs)
Dimensions (L x W x H) 180 x 60 x 25 mm (7.09 x 2.36 x 0.98 inches)
Safety Features Automatic high temperature shut-off, short circuit protection, overvoltage protection

Warranty and Support

The 1byone Blood Pressure Monitor Power Adapter is backed by a 1-year warranty from the date of purchase. This warranty covers manufacturing defects under normal use.

For warranty claims, technical support, or any questions regarding your product, please contact 1byone customer service. Please have your model number (703US-0003) and proof of purchase ready when contacting support.

You can find contact information on the official 1byone website or through your retailer.

© 2023 1byone. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.