Important Safety Instructions
Please read and understand all instructions before assembling and using this product. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Ensure the power is turned off at the main circuit breaker before installation or maintenance.
- This lamp is intended for indoor use only. Do not expose to moisture or extreme temperatures.
- Use only the specified bulb type and wattage. Exceeding the recommended wattage may cause overheating.
- Do not operate the lamp with a damaged cord or plug. If damaged, contact customer support for replacement.
- Keep the lamp away from flammable materials.
- Do not attempt to modify the lamp in any way.
- Always place the lamp on a stable, level surface to prevent tipping.
Package Contents
Verify that all components are present before beginning assembly. If any parts are missing or damaged, do not proceed with assembly and contact customer support.
- Lamp Shade
- Arc Lamp Pole (Multiple sections)
- Lamp Base (Faux Black Marble)
- Foot Switch with Power Cord
- Assembly Hardware (Screws, washers, etc.)
- Instruction Manual
Image: All components of the Teamson Home Arquer Arc Floor Lamp are shown, including the lamp shade, arc pole sections, faux black marble base, and power cord with foot switch, ready for assembly.
Setup and Assembly
Follow these steps carefully to assemble your arc floor lamp.
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratching.
- Attach Pole to Base: Securely attach the lowest section of the arc lamp pole to the faux black marble base using the provided hardware. Ensure it is tightened firmly to prevent wobbling.
- Connect Pole Sections: Connect the remaining arc lamp pole sections by twisting them clockwise until they are securely joined. Ensure the electrical wire passes freely through each section without being pinched.
- Install Lamp Shade: Carefully attach the lamp shade to the top of the arc pole. Ensure it is seated correctly and tightened if necessary.
- Insert Light Bulb: Screw an E26 base light bulb (not included) into the lamp socket. Refer to the specifications section for recommended wattage.
- Position Lamp: Place the assembled lamp in your desired location, ensuring the base is stable and the power cord can reach an outlet without being strained or creating a tripping hazard.
Image: A detailed view of the lamp's stable faux black marble base and the convenient foot switch, illustrating key components for assembly and operation.
Operating Instructions
This lamp features a simple on/off foot switch for easy operation.
- Plug In: Insert the power cord plug into a standard 120V AC electrical outlet.
- Turn On/Off: Locate the foot switch on the power cord. Press the switch with your foot to turn the lamp on or off.
Bulb Information: This lamp requires one E26 base bulb. It is compatible with a 40W incandescent bulb or a 6W LED equivalent (bulb not included).
Maintenance
Regular maintenance ensures the longevity and optimal performance of your lamp.
- Cleaning: Disconnect the lamp from the power source before cleaning. Use a soft, dry cloth to wipe down the lamp shade, pole, and base. Do not use abrasive cleaners or solvents, as they may damage the finish.
- Bulb Replacement: Ensure the lamp is unplugged and the bulb has cooled completely before attempting to replace it. Unscrew the old bulb and screw in a new E26 base bulb of the correct wattage (max 40W incandescent or 6W LED equivalent).
- Cord Inspection: Periodically inspect the power cord and plug for any signs of damage. If damage is found, discontinue use and contact customer support.
Troubleshooting
If you encounter issues with your lamp, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. | No power to the outlet. | Check the wall switch or circuit breaker. Test the outlet with another device. |
| Lamp does not turn on. | Bulb is loose or burnt out. | Ensure the bulb is screwed in tightly. Replace the bulb if it is burnt out. |
| Lamp does not turn on. | Foot switch or power cord is damaged. | Inspect the foot switch and power cord for visible damage. If damaged, discontinue use and contact customer support. |
| Lamp flickers. | Loose bulb or incorrect bulb type. | Tighten the bulb. Ensure the bulb is compatible with the lamp's specifications. |
Specifications
- Product Dimensions: 43.39" D x 11.81" W x 66.93" H
- Shade Dimensions: 11.81" diameter x 8.26" H
- Item Weight: 25.4 Pounds
- Base Material: Faux Black Marble
- Finish Type: Painted (Black)
- Bulb Base: E26
- Max Wattage: 40W Incandescent / 6W LED Equivalent (Bulb not included)
- Power Cord Length: 78.74" (approx. 6.5 ft)
- Switch Type: Foot Switch
Image: A technical diagram illustrating the key dimensions of the Teamson Home Arquer Arc Floor Lamp, including height, depth, and shade diameter.
Warranty and Support
For warranty information or technical support, please refer to the documentation included with your purchase or visit the official Teamson Home website. Keep your purchase receipt as proof of purchase for any warranty claims.
Contact Information: Please refer to the manufacturer's website or your purchase documentation for the most current customer service contact details.