1. Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of your new Teamson Home Arquer 68.1" Arc Floor Lamp. Designed with a Mid-Century Modern aesthetic, this lamp features a faux white marble base, a slender arced stem, and a polished chrome bell shade, making it a versatile addition to any living space, home office, dining room, or bedroom.
Please read these instructions thoroughly before assembly and use to ensure safe and proper operation.
2. Safety Information
- Always unplug the lamp from the power outlet before cleaning, changing the light bulb, or performing any maintenance.
- Do not use bulbs exceeding the specified wattage (Max 40W, E26 base). Refer to the bulb socket for specific wattage recommendations.
- Ensure all connections are secure before plugging in the lamp.
- The lamp features a heavy marble base for stability. Exercise caution when moving the lamp to prevent injury or damage. Avoid placing the base where it could be a tripping hazard or fall on feet.
- Keep the power cord away from heat sources, sharp edges, and wet areas.
- This lamp is designed for indoor use only. Do not expose to moisture or extreme temperatures.
- If any part of the lamp is damaged, discontinue use and contact customer support.
3. Package Contents
Please verify that all components are present before beginning assembly:
- Heavy Faux White Marble Base
- Arc Stem Sections (multiple pieces)
- Chrome Bell Shade
- Power Cord with Foot Switch
- Assembly Hardware (screws, washers, etc.)
- Basic Assembly Tools (if included)
- Instruction Manual
A full view of the Teamson Home Arquer Arc Floor Lamp, showcasing its elegant curved design, polished chrome bell shade, and sturdy white marble base.
4. Assembly Instructions
Assembly is straightforward and typically takes about 10-20 minutes. It is recommended to have a second person assist due to the weight of the base.
- Carefully unpack all components and lay them out on a clean, soft surface to prevent scratches.
- Connect the arc stem sections by twisting them together securely. Ensure the internal wiring is not pinched. Some sections may have locking mechanisms; ensure these are engaged.
- Attach the assembled arc stem to the heavy faux white marble base. The pole should be inserted into the designated hole, typically towards the back edge of the base for optimal balance and stability. Secure it using the provided hardware.
- Carefully attach the chrome bell shade to the top of the arc stem. Ensure it is firmly secured and aligned.
- Insert a compatible E26 base light bulb (Max 40W, not included) into the socket within the shade.
- Route the power cord neatly, ensuring the foot switch is accessible.
A detailed diagram illustrating the key measurements of the arc floor lamp, including its overall height of 66.93 inches (170 cm), depth of 43.4 inches (109.98 cm), and shade diameter of 11.81 inches (30 cm).
5. Operating Instructions
- Plug the power cord into a standard electrical outlet.
- Locate the foot switch on the power cord.
- Press the foot switch to turn the lamp ON.
- Press the foot switch again to turn the lamp OFF.
An image highlighting specific features of the lamp, including the heavy 12.75" x 2.25" marble base, the sleek modern chrome finish of the shade, and the accessible foot-operated on/off switch.
6. Maintenance
- Cleaning: To clean the lamp, unplug it and wipe surfaces with a soft, dry cloth. For the chrome shade, a mild glass cleaner can be used, followed by a dry polish to maintain its shine. Avoid abrasive cleaners that may damage the finish.
- Bulb Replacement: Ensure the lamp is unplugged and the bulb has cooled before attempting to replace it. Unscrew the old bulb and screw in a new E26 base bulb (Max 40W).
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. |
|
|
| Lamp feels unstable or leans. |
|
|
8. Specifications
- Model Name: Arquer
- Model Number: VN-L00010
- Brand: Teamson Home
- Dimensions (Overall): 43.4"D x 11.81"W x 66.93"H (110.2 cm D x 30 cm W x 170 cm H)
- Shade Dimensions: 11.81" Diameter x 8.26" Height
- Base Diameter: 12.6 Inches
- Item Weight: 25.4 Pounds
- Base Material: Faux Marble
- Shade Material: Metal
- Finish Type: Polished Chrome
- Bulb Base: E26
- Max Wattage: 40W
- Light Source Type: LED (recommended, bulb not included)
- Power Source: Corded Electric
- Switch Type: Foot Switch
- Indoor/Outdoor Usage: Indoor
- Assembly Required: Yes
- Certification: UL
9. Warranty and Support
This Teamson Home product comes with a 30-day warranty for manufacturer defects from the date of purchase. Please retain your proof of purchase for warranty claims.
For further assistance, troubleshooting, or to inquire about replacement parts, please visit the official Teamson Home website or contact their customer support directly. You can find more information at Teamson Home Store.
