Ikea SVALSTA Nesting Tables User Manual

1. Introduction

This user manual provides comprehensive instructions for the assembly, use, and maintenance of your Ikea SVALSTA Nesting Tables. Please read this manual carefully before assembly and use to ensure safe operation and product longevity.

2. Safety Warnings

Important: Always follow these safety instructions to ensure safe use and stability of the tables.

• Assembly is required. Ensure all parts are correctly assembled according to the instructions.
• Do not exceed the maximum recommended weight of 50 pounds (approximately 22.7 kg) per table.
• Place tables on a flat, stable surface to prevent tipping.
• Keep small parts away from children during assembly.
• Regularly check all fittings and tighten them as necessary.

3. Package Contents

Your Ikea SVALSTA Nesting Tables package includes:

• 1x Large Nesting Table (73 x 63 cm, 45 cm high)
• 1x Small Nesting Table (55 x 45 cm, 40 cm high)
• Required assembly hardware (screws, dowels, etc.)
• Assembly instructions (this manual)

4. Setup and Assembly

The Ikea SVALSTA Nesting Tables are designed for self-assembly. Please follow these general steps. Specific diagrams and detailed instructions for each part are typically included in a separate leaflet within the packaging.

1. Unpack Components: Carefully remove all parts from the packaging and verify against the parts list.
2. Identify Parts: Separate the table tops from the leg components. Note that the legs are curved and designed to fit specific slots.
3. Attach Legs to Table Tops: For each table, align the curved legs with the pre-drilled holes or slots on the underside of the table top. Secure them using the provided screws or fasteners. Ensure the legs are firmly attached and stable.
4. Tighten All Fittings: Once all legs are attached, gently place the table upright and check for stability. Tighten all screws and fittings to ensure the tables are secure. Do not overtighten.
5. Final Check: Ensure both tables are stable and all connections are secure before use.

Figure 1: Assembled Ikea SVALSTA Nesting Tables. This image displays both the larger and smaller tables, highlighting their birch veneer finish and curved leg design.

5. Operating and Usage

The Ikea SVALSTA Nesting Tables offer versatile usage options:

• Individual Use: Both tables can be used separately as side tables, coffee tables, or accent tables in different areas of a room.
• Nesting Function: The smaller table is designed to fit underneath the larger table, allowing for space-saving storage when not in use or creating a multi-level surface when partially nested.
• Weight Capacity: Do not place items heavier than 50 pounds (22.7 kg) on either table.
• Indoor Use: These tables are designed for indoor use only.

6. Maintenance

Proper care will help maintain the appearance and longevity of your tables:

• Cleaning: Wipe clean with a damp cloth. Use a mild cleaner if necessary.
• Drying: Wipe dry with a clean cloth.
• Avoid Harsh Chemicals: Do not use abrasive cleaners or strong chemical solvents, as these can damage the birch veneer and acrylic lacquer finish.
• Protect Surfaces: Use coasters under hot or wet items to prevent marks and stains.
• Regular Checks: Periodically check and retighten all assembly fittings to ensure stability.

7. Troubleshooting

• Table is wobbly: Ensure all screws and fittings are securely tightened. Check that the table is placed on a level surface.
• Difficulty with assembly: Refer to the detailed assembly instructions provided in the packaging. Ensure all parts are correctly oriented before tightening.
• Surface damage: For minor scratches, touch-up pens or furniture repair kits designed for birch veneer may be used. For significant damage, contact Ikea customer service.

8. Specifications

9. Warranty and Support

For information regarding warranty, spare parts, or customer support, please refer to the official Ikea website or contact your local Ikea store directly. Specific warranty details may vary by region.

Spare parts availability information is not provided in the product details.