HEWLETT PACKARD NVIDIA Quadro M2000 4GB Graphics Card User Manual

1. Introduction

This manual provides detailed instructions for the installation, setup, operation, and maintenance of your HEWLETT PACKARD NVIDIA Quadro M2000 4GB Graphics Card. Please read this manual thoroughly before installing or using the product to ensure proper functionality and to prevent damage.

2. Product Overview

The NVIDIA Quadro M2000 is a professional graphics card designed for demanding visual computing workflows. It features 4GB of GDDR5 memory and supports multiple display outputs, making it suitable for CAD, DCC, and visualization applications. This card provides a balance of performance and power efficiency for various professional environments.

Figure 2.1: Angled view of the NVIDIA Quadro M2000 graphics card, highlighting its cooling fan and DisplayPort connectors.

Figure 2.2: Top-down perspective of the NVIDIA Quadro M2000, illustrating the heatsink assembly and the green printed circuit board (PCB).

3. Package Contents

Verify that all items are present in your product package:

• NVIDIA Quadro M2000 4GB Graphics Card
• Quick Start Guide or Documentation
• (Optional: DisplayPort to DVI adapters, depending on specific bundle)

4. System Requirements

Before installation, ensure your system meets the following minimum requirements:

• Available PCI Express x16 slot
• Minimum 350W power supply with one 6-pin PCI Express power connector (check specific system requirements for your workstation)
• Compatible operating system (e.g., Windows 7/8/10/11, Linux)
• Minimum 2GB system memory (4GB recommended)
• Internet connection for driver download and updates

5. Installation

5.1. Pre-Installation

1. Power Off: Shut down your computer and disconnect the power cable from the wall outlet.
2. Open Case: Open your computer case to access the motherboard.
3. Static Discharge: Ground yourself by touching an unpainted metal surface on the computer chassis to discharge any static electricity.
4. Remove Old Card (if applicable): If replacing an existing graphics card, carefully remove it.

5.2. Hardware Installation

1. Locate an available PCI Express x16 slot on your motherboard.
2. Remove the corresponding expansion slot cover from the computer case.
3. Carefully align the graphics card with the PCI Express slot and press down firmly until it is securely seated.
4. Secure the card to the computer chassis with the screw or retention clip.
5. Connect the 6-pin PCI Express power connector from your power supply to the graphics card, if required by your system configuration.
6. Close the computer case and reconnect the power cable.

5.3. Driver Installation

1. Power on your computer. The operating system may install a basic display driver.
2. Visit the official NVIDIA website (www.nvidia.com/drivers) or the HEWLETT PACKARD support website to download the latest drivers for the NVIDIA Quadro M2000.
3. Run the downloaded driver installer and follow the on-screen prompts. It is recommended to perform a clean installation.
4. Restart your computer after the driver installation is complete.

6. Setup

6.1. Connecting Displays

Connect your monitors to the DisplayPort outputs on the graphics card using DisplayPort cables. The NVIDIA Quadro M2000 supports up to four displays simultaneously.

6.2. Configuring Display Settings

1. Once drivers are installed, right-click on your desktop and select NVIDIA Control Panel.
2. Within the NVIDIA Control Panel, navigate to the Display section.
3. You can configure display resolution, refresh rate, and multi-monitor setups (e.g., Extend, Duplicate, Surround) from here.
4. Adjust settings according to your workflow requirements.

7. Operating

The NVIDIA Quadro M2000 is designed for optimal performance in professional applications. Ensure your software is updated to leverage the full capabilities of the graphics card. For specific application settings, refer to the software's documentation or NVIDIA's professional application guides.

8. Maintenance

• Driver Updates: Regularly check the NVIDIA website for the latest driver updates to ensure optimal performance and compatibility.
• Cleaning: Periodically clean dust from the graphics card's fan and heatsink using compressed air. Ensure the computer is powered off and unplugged before cleaning.
• Ventilation: Ensure adequate airflow within your computer case to prevent overheating.

9. Troubleshooting

• No Display Output:
  • Ensure the monitor cables are securely connected to both the graphics card and the monitor.
  • Verify the graphics card is fully seated in the PCI Express slot.
  • Check if the power connector (if any) is properly attached to the card.
  • Test with a different monitor or cable.
• Driver Issues:
  • If display issues persist after driver installation, try uninstalling existing drivers and performing a clean installation of the latest drivers from NVIDIA's website.
  • Ensure your operating system is up to date.
• Performance Problems:
  • Verify that your system meets the recommended specifications for your applications.
  • Check for overheating; ensure proper case ventilation and clean the card's fan.
  • Update your application software to the latest versions.

For further assistance, refer to the NVIDIA support website or contact HEWLETT PACKARD customer support.

10. Specifications

11. Warranty and Support

This HEWLETT PACKARD NVIDIA Quadro M2000 Graphics Card is covered by a manufacturer's warranty. For detailed warranty terms and conditions, please refer to the documentation included with your product or visit the official HEWLETT PACKARD support website. For technical support, driver downloads, and additional resources, please visit:

• NVIDIA Support: www.nvidia.com/support
• HEWLETT PACKARD Support: Refer to your specific HP workstation documentation or the HP support website for product-specific support.

Please have your product model number (T7T60AA) and serial number ready when contacting support.