Introduction
This instruction manual provides detailed guidance for the safe installation, operation, and maintenance of your Home Decorators Collection 52-inch Indoor Bronze Organza Shade Ceiling Fan. Please read all instructions carefully before beginning installation and retain this manual for future reference. This ceiling fan features a hand-applied bronze finish, reversible cherry and walnut blades, and a reversible motor for year-round air movement.

Image: The 52-inch ceiling fan in bronze finish with an organza shade and a remote control unit.
Important Safety Information
To reduce the risk of fire, electric shock, or personal injury, always follow these basic precautions:
- Read all instructions before installing the fan.
- Ensure the installation site is suitable for the fan's weight and size.
- All wiring must be in accordance with national and local electrical codes.
- Disconnect power at the main circuit breaker before installation or servicing.
- Do not operate the fan with a damaged power cord or plug.
- Avoid placing objects in the path of the fan blades.
- Do not use the fan outdoors or in wet locations.
Package Contents
Verify that all components listed below are included in your package:
- Ceiling Fan Motor Assembly
- Fan Blades (5)
- Blade Brackets
- Light Kit with Organza Shade
- Remote Control with Wall Mount
- Downrod and Canopy Assembly
- Hardware Pack (screws, washers, wire nuts)

Image: A close-up view of the fan blade attachment point, showing the bronze finish and mounting hardware.
Installation Guide
This section outlines the general steps for installing your ceiling fan. For detailed diagrams and specific instructions, refer to the separate installation sheet included with your product.
- Prepare the Installation Site: Ensure the electrical box is securely mounted and capable of supporting the fan's weight. Turn off power at the circuit breaker.
- Assemble the Downrod: Attach the downrod to the motor housing, feeding the electrical wires through.
- Mount the Hanging Bracket: Secure the hanging bracket to the electrical box.
- Hang the Fan: Carefully lift the fan assembly and hang it from the hanging bracket.
- Make Electrical Connections: Connect the fan's wiring to the household wiring according to the provided wiring diagram. Ensure all connections are secure.
- Attach the Canopy: Slide the canopy up to the ceiling and secure it to the hanging bracket.
- Install Fan Blades: Attach the blade brackets to the fan blades, then secure the blade assemblies to the motor housing.
- Install the Light Kit: Connect the light kit wiring and attach the light kit to the fan motor housing. Install the organza shade.
- Restore Power: Turn on power at the circuit breaker and test the fan's operation.
Operating Instructions
Your ceiling fan is operated using the included remote control.
Remote Control Operation
- Fan ON/OFF: Press the power button to turn the fan on or off.
- Fan Speed: Use the speed buttons (1, 2, 3) to adjust the fan speed. (3 being the highest, 1 being the lowest).
- Light ON/OFF/Dimming: Press the light button to turn the light on or off. Hold the light button to dim or brighten the light.

Image: The ceiling fan and its accompanying remote control, illustrating the primary control interface.
Reversible Motor Function
This fan features a reversible motor, allowing you to change the direction of the blades for seasonal comfort. A switch on the fan's motor housing controls the direction.
- Summer Mode (Downward Airflow): Set the switch to allow blades to rotate counter-clockwise, creating a downward breeze for cooling.
- Winter Mode (Upward Airflow): Set the switch to allow blades to rotate clockwise, drawing warm air up and distributing it around the room.
Always turn off the fan and wait for the blades to stop completely before changing the direction switch.

Image: A view of the fan blades, highlighting their reversible design with distinct cherry and walnut finishes on opposite sides.
Maintenance and Care
Regular maintenance ensures the longevity and optimal performance of your ceiling fan.
- Cleaning: Use a soft, damp cloth to clean the fan's surfaces. Do not use abrasive cleaners or solvents, as these can damage the finish.
- Blade Cleaning: Dust the fan blades regularly to prevent buildup, which can affect balance and performance.
- Tighten Fasteners: Periodically check and tighten all screws and fasteners on the fan blades and mounting hardware.
- Light Bulb Replacement: Ensure power is off before replacing light bulbs. Use bulbs of the correct wattage and type as specified in the product documentation.
Troubleshooting
Refer to this section for common issues and their potential solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan does not start | No power to the fan; Loose wire connections; Remote control battery dead. | Check circuit breaker; Verify all wire connections; Replace remote control battery. |
| Fan wobbles | Loose blade screws; Unbalanced blades; Loose mounting bracket. | Tighten all blade screws; Use a balancing kit (not included); Ensure mounting bracket is secure. |
| Light does not work | Light bulb burned out; Loose wire connection in light kit. | Replace light bulb; Check light kit wiring connections. |
| Noisy operation | Loose screws; Motor housing rubbing; Incorrect blade installation. | Check and tighten all screws; Ensure no parts are rubbing; Reinstall blades correctly. |
Product Specifications
| Specification | Detail |
|---|---|
| Brand | Home Decorators Collection |
| Model Name | 89763 |
| Electric Fan Design | Ceiling Fan |
| Size | 52 inches |
| Color | Brown (Bronze finish) |
| Finish Type | Bronze |
| Room Type | Bedroom, Living Room |
| Indoor/Outdoor Usage | Indoor |
| Special Feature | Remote Control |
| Control Method | Remote |
| Power Source | AC |
| Voltage | 120 Volts (AC) |
| Wattage | 75 watts |
| Number of Power Levels | 3 |
| Item Weight | 24 Pounds |
| Product Dimensions | 52 x 52 x 15.4 inches |
| Included Components | Remote |
| UPC | 887912897634 |
Warranty and Customer Support
For warranty information, please refer to the warranty card included with your product. This document outlines the terms and conditions of your product's warranty coverage.
Should you require technical assistance, replacement parts, or have questions regarding your Home Decorators Collection ceiling fan, please contact the manufacturer's customer support. Contact details are typically provided in the product packaging or on the manufacturer's official website.





