Camp Chef PGSEAR

Download PDF
Contents

Camp Chef SmokePro Sear Box PGSEAR Instruction Manual

Accessory for Camp Chef Pellet Grills

1. Introduction

This manual provides essential information for the safe and effective use of your Camp Chef SmokePro Sear Box (Model PGSEAR). Please read all instructions carefully before assembly and operation. Retain this manual for future reference.

2. Safety Information

WARNING: This product can expose you to chemicals including carbon monoxide, which is known to the State of California to cause birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Always operate the sear box in a well-ventilated outdoor area. Keep children and pets away from the appliance during operation. Ensure proper clearance from combustible materials.

3. Package Contents

Verify that all components are present before beginning assembly:

  • Camp Chef SmokePro Sear Box unit
  • Stainless steel construction
  • Cast Iron Searing Grates
  • Control knob with built-in ignition
  • Propane burner
  • Necessary hardware for attachment to compatible Camp Chef Pellet Grills

4. Setup and Assembly

The Camp Chef SmokePro Sear Box is designed as an accessory for specific Camp Chef Pellet Grills, including models PG24, PG24S, PG24LTD, and PG36LUX. It attaches using existing hardware on your pellet grill, typically replacing a side shelf.

  1. Unpack Components: Carefully remove all items from the packaging.
  2. Attach to Grill: Position the sear box onto the designated mounting points on your Camp Chef Pellet Grill. Secure it using the provided or existing hardware. Ensure a stable and secure connection.
  3. Install Grates: Place the cast iron searing grates inside the sear box.
  4. Connect Propane: Connect a standard propane tank (not included) to the sear box's regulator hose. Ensure all connections are tight and leak-free.
Camp Chef Pellet Grill with Sear Box attached
Image: A Camp Chef pellet grill with the SmokePro Sear Box securely attached to its side. The sear box features a stainless steel lid and a control knob.
Close-up of Camp Chef Sear Box attached to grill
Image: A close-up view of the Camp Chef SmokePro Sear Box attached to the side of a pellet grill. The lid is closed, and the control knob is visible at the front.
Camp Chef Sear Box with lid open showing grates
Image: The Camp Chef SmokePro Sear Box with its lid open, revealing the heavy-duty cast iron searing grates inside. The unit is attached to a pellet grill.

5. Operating Instructions

5.1 Lighting the Sear Box

  1. Ensure the propane tank is connected and the valve is open.
  2. Turn the control knob slightly to allow propane to flow into the burner. Listen for the sound of gas.
  3. Continue turning the knob to the 'High' position. This action engages the built-in spark igniter.
  4. If the burner does not ignite immediately, turn the knob to 'Off', wait 5 minutes, and repeat the lighting procedure.

5.2 Searing and Cooking

The 16,000 BTU propane burner allows the sear box to reach temperatures up to 900°F, ideal for high-heat searing.

  • Preheating: Close the lid and allow the sear box to preheat for 10-15 minutes on high heat to achieve optimal searing temperatures.
  • Searing: Place food directly on the hot cast iron grates. For best results, sear each side for a short duration (e.g., 45 seconds to 2 minutes per side for steaks) to create a crust and grill marks.
  • Reverse Searing: For thicker cuts of meat, consider smoking them on your pellet grill first until they reach a desired internal temperature, then transfer them to the preheated sear box for a final high-heat sear.
  • Versatility: The sear box is suitable for various foods, including steaks, burgers, hot dogs, and pork chops.
Two large steaks searing on the Camp Chef Sear Box
Image: A close-up view of two large bone-in steaks with visible grill marks, actively searing on the hot cast iron grates of the Camp Chef SmokePro Sear Box. Flames are visible beneath the grates.

6. Maintenance

Regular maintenance ensures the longevity and performance of your sear box.

  • Cleaning Grates: After each use, allow the grates to cool slightly, then clean them with a grill brush to remove food residue. For stubborn residue, remove the grates and wash with warm, soapy water, then dry thoroughly.
  • Exterior Cleaning: Wipe down the stainless steel exterior with a damp cloth and mild detergent. Avoid abrasive cleaners.
  • Storage: When not in use, store the sear box in a dry, protected area. Disconnect the propane tank and store it separately according to local regulations.

7. Troubleshooting

If you encounter issues with your Camp Chef SmokePro Sear Box, refer to the following common problems and solutions:

ProblemPossible CauseSolution
Burner does not light
  • Propane tank empty or valve closed
  • Igniter not sparking
  • Gas flow obstructed
  • Check propane level and ensure valve is open
  • Ensure control knob is turned fully to 'High' to engage igniter
  • Check for kinks in the gas hose
Low heat output
  • Low propane level
  • Regulator issue
  • Replace or refill propane tank
  • Ensure regulator is properly connected and not obstructed

8. Specifications

  • Product Dimensions: 14 x 22.5 x 14.5 inches
  • Item Weight: 31.5 pounds
  • Model Number: PGSEAR
  • BTU Output: 16,000 BTU burner
  • Maximum Temperature: Up to 900°F
  • Construction: Stainless steel with cast iron searing grates
  • Compatibility: Camp Chef Pellet Grill Models PG24, PG24S, PG24LTD, PG36LUX

© Camp Chef. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.