Behringer LINE 2 USB Interface Cable User Manual

Introduction

The Behringer LINE 2 USB is a stereo line-in to USB interface cable designed to connect electronic musical instruments, mixers, or other audio devices with 1/4" outputs directly to your computer. This cable facilitates high-quality audio recording and playback, offering a simple plug-and-play solution for both Mac and PC systems.

Image: The Behringer LINE 2 USB cable, featuring dual 1/4" jack connectors on one end and a USB Type-A connector on the other, designed for direct audio input to computers.

Important Safety Instructions

• Read these instructions thoroughly before use.
• Keep these instructions for future reference.
• Heed all warnings on the product and in this manual.
• Follow all instructions for safe operation.
• Do not use this apparatus near water or in damp environments.
• Clean only with a dry cloth.
• Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
• Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
• Only use attachments/accessories specified by the manufacturer.
• Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Features

• Stereo line in to USB interface cable for direct connection to computers.
• Equipped with dual mono 1/4" jack connectors for versatile input options.
• Ideal for recording electronic musical instruments, mixers, and other line-level audio sources.
• Generous 2-meter (6.6 foot) cable length provides flexibility in setup.
• Features simple Plug-and-Play connectivity, requiring no additional drivers for Mac* and PC computers.

Image: A graphic illustrating the USB interface capability, highlighting the plug-and-play nature of the cable.

Setup

Connecting the LINE 2 USB Cable

1. Identify Inputs: Locate the 1/4" line-level outputs on your audio source (e.g., mixer, keyboard, drum machine, or other electronic musical instrument). Ensure these are line-level outputs, not speaker outputs.
2. Connect 1/4" Jacks: Plug the dual mono 1/4" jack connectors of the LINE 2 USB cable into the corresponding left (L) and right (R) outputs of your audio source. The red connector typically corresponds to the right channel, and the white/black connector to the left channel.
3. Connect USB: Insert the USB Type-A connector of the cable into an available USB port on your Mac or PC computer.
4. System Recognition: Your computer should automatically detect the LINE 2 USB cable as an audio input device. No additional drivers are typically required for Windows or macOS.

Initial Software Configuration

Once connected, you may need to select the LINE 2 USB as your audio input device within your operating system's sound settings or your preferred Digital Audio Workstation (DAW) software.

• Windows: Go to "Sound Settings" > "Sound Control Panel" > "Recording" tab. Select "USB PnP Audio Device" (or similar) as your default recording device.
• macOS: Go to "System Settings" (or "System Preferences") > "Sound" > "Input" tab. Select "USB PnP Audio Device" (or similar) from the list.
• DAW Software: Within your recording software (e.g., Audacity, GarageBand, Ableton Live), navigate to the audio preferences or settings and select the LINE 2 USB as your audio input device.

Image: The Behringer LINE 2 USB cable displayed in its transparent retail packaging, showing the cable and its connectors.

Operating

Recording Audio

1. Set Levels: Before recording, ensure the output level from your audio source is appropriate. Start with a low volume and gradually increase it. Monitor the input levels in your recording software to prevent clipping (distortion). The goal is to achieve a strong signal without exceeding the maximum input level.
2. Start Recording: In your chosen recording software, initiate the recording process.
3. Monitor Audio: Listen to the audio through your computer's speakers or headphones to ensure the sound is being captured correctly. Adjust levels as needed.
4. Stop Recording: Once finished, stop the recording in your software and save your project.

The LINE 2 USB cable is designed for one-way audio transfer from your instrument/mixer to your computer. It does not provide audio output from the computer back to your audio source.

Image: A group of individuals engaged in singing, illustrating a potential use case for recording vocals or instruments with the cable.

Maintenance

• Cleaning: Wipe the cable and connectors with a soft, dry cloth. Do not use liquid cleaners or aerosols.
• Storage: Store the cable in a cool, dry place, away from direct sunlight and extreme temperatures. Avoid tightly coiling the cable to prevent damage to the internal wiring.
• Handling: Always grasp the connectors when plugging or unplugging the cable. Avoid pulling on the cable itself, as this can damage the internal connections.
• Inspection: Periodically inspect the cable for any signs of wear, fraying, or damage to the connectors. If damage is observed, discontinue use.

Troubleshooting

Specifications

Warranty and Support

Behringer products are manufactured to high quality standards. For detailed warranty information and technical support, please refer to the official Behringer website or contact their customer service directly. Product registration may be available and is recommended to ensure full warranty coverage.

For additional resources and product information, you may visit the official Behringer support page or scan the QR code found on the product packaging: http://qr.music-group.com/bu8t