LE Rechargeable Headlamp User Manual

1. Introduction

Thank you for choosing the LE Rechargeable Headlamp. This manual provides important information regarding the safe operation, maintenance, and troubleshooting of your headlamp. Please read it thoroughly before use and retain it for future reference.

2. Safety Information

• Do not look directly into the LED light when it is on, as it may cause temporary vision impairment or eye damage.
• Keep the headlamp away from children.
• Do not disassemble, modify, or repair the device yourself. Contact qualified personnel for service.
• Avoid exposing the headlamp to extreme temperatures, direct sunlight, or corrosive substances.
• Ensure the charging port is dry before connecting the USB cable to prevent short circuits.
• Dispose of the battery according to local regulations. Do not incinerate.

3. Package Contents

• 1 x LE Rechargeable Headlamp
• 1 x USB Charging Cable
• 1 x User Manual (this document)

4. Product Overview

Components

• LED Light Source (White & Red)
• Adjustable Headband
• Power Button
• Mode Button
• USB Charging Port
• Adjustable Lamp Body (45° tilt)

Controls

• Power Button: Press to turn on/off.
• Mode Button: Press to cycle through lighting modes.

5. Setup

5.1 Charging the Headlamp

Before first use, fully charge the headlamp. The integrated rechargeable battery ensures long-term outdoor activities.

1. Locate the USB charging port on the headlamp.
2. Connect the included USB charging cable to the headlamp's port.
3. Connect the other end of the USB cable to a standard USB power source (e.g., wall adapter, power bank, computer USB port).
4. The indicator light will show charging status (e.g., red for charging, green for fully charged).
5. A full charge provides approximately 25 hours of stable illumination (4 hours at maximum brightness).

5.2 Adjusting the Headband

The elastic and adjustable headband ensures a comfortable fit for both children and adults.

1. Place the headlamp on your head.
2. Use the adjustable buckles on the headband to tighten or loosen it until it feels secure but comfortable.

6. Operating Instructions

6.1 Power On/Off

• To turn on the headlamp, press the Power Button once.
• To turn off the headlamp, press the Power Button again.

6.2 Selecting Lighting Modes

The headlamp features 5 lighting modes to suit various needs:

1. High Brightness (White Light): Provides maximum illumination.
2. Low Brightness (White Light): Offers reduced brightness for extended battery life.
3. White Light Flash (Strobe): A flashing white light for signaling or emergencies.
4. Steady Red Light: Preserves night vision and is less disruptive to others.
5. Red Light Flash (SOS Signal): A flashing red light for emergency signaling.

To cycle through these modes, press the Mode Button repeatedly after turning the headlamp on.

6.3 Adjusting Beam Angle

The lamp body can be tilted up to 45 degrees to direct the light precisely where needed.

• Gently push or pull the lamp body to adjust its angle. It will click into various positions.

7. Maintenance

7.1 Cleaning

• Wipe the headlamp with a soft, damp cloth. Do not use abrasive cleaners or solvents.
• Ensure the headlamp is dry before storing or charging.

7.2 Storage

• Store the headlamp in a cool, dry place away from direct sunlight.
• If storing for an extended period, charge the battery every 3-6 months to maintain its lifespan.

8. Troubleshooting

9. Specifications

10. Warranty and Support

This product is covered by a manufacturer's warranty. For detailed warranty information, support, or service inquiries, please refer to the warranty card included with your purchase or visit the official Lepro website. Please retain your proof of purchase for warranty claims.