K&F CONCEPT KF01.897

Download PDF
Contents

K&F Concept 82mm ND1000 Nano-X Series ND Filter Instruction Manual

Model: KF01.897

Introduction

This manual provides essential information for the proper use and care of your K&F Concept 82mm ND1000 Nano-X Series Neutral Density Filter. This 10-stop fixed ND filter is designed to reduce the amount of light entering your camera lens, enabling longer exposure times and wider apertures in bright conditions. Please read this manual thoroughly before using the product.

K&F Concept ND1000 Nano-X Series filter and packaging

Image: The K&F Concept ND1000 Nano-X Series filter shown with its protective case and packaging.

Product Features

  • 10-Stop Fixed Neutral Density: Reduces light by 10 stops for long exposure photography. This is a fixed filter, not variable.
  • Premium AGC Optical Glass: Manufactured from Japanese AGC optical glass with 0.2% reflectivity, ensuring no color cast.
  • 28 Multi-Layer Nano-Coatings: Suppresses ghosting, flare, and reflections, enhancing light transmission and image quality.
  • Hydrophobic & Scratch-Resistant: Nanometer coatings effectively repel oil, fingerprints, and scratches, protecting the lens.
  • Ultra-Slim Aviation Aluminum Frame: Lightweight and durable frame prevents vignetting on wide-angle lenses and ensures easy installation/removal.
Diagram illustrating the features of the K&F Concept ND1000 filter including import optical glass, 28 layers nano-coating, 0.2% reflectivity, and waterproof properties.

Image: Key features of the K&F Concept ND1000 filter, highlighting its optical quality and protective coatings.

Close-up of the K&F Concept ND1000 filter showing the 28 layer nanometer coatings

Image: A close-up view of the K&F Concept ND1000 filter, emphasizing its 28-layer nanometer coatings for reduced reflectivity.

Setup

  1. Identify Your Lens Filter Size: Locate the filter thread size on your camera lens. This is typically marked with a "Ø" symbol followed by a number (e.g., Ø82mm). Ensure your K&F Concept ND1000 filter matches this size.
  2. Attach the Filter: Gently align the filter with the lens thread. Rotate clockwise until it is securely fastened. Avoid overtightening.
  3. Remove the Filter: Rotate counter-clockwise to loosen and remove the filter.

Video: This video demonstrates how to correctly identify your camera lens filter size and attach a K&F Concept filter.

Operating Instructions

The ND1000 filter reduces light by 10 stops, allowing for significantly longer exposure times. This is ideal for:

  • Creating Motion Blur: Achieve silky smooth water effects in waterfalls or rivers, and blur moving clouds.
  • Eliminating Crowds: In busy public spaces, long exposures can make moving people disappear, leaving only static elements.
  • Controlling Depth of Field: Use wider apertures in bright conditions to achieve a shallow depth of field without overexposing.

When using the ND1000 filter, you will need to adjust your camera's exposure settings (shutter speed, aperture, ISO) to compensate for the reduced light. It is recommended to compose and focus your shot before attaching the filter, as the scene will appear very dark through the viewfinder or live view.

Comparison of a landscape photo with and without the K&F Concept ND1000 filter, showing motion blur on water with the filter.

Image: Example of landscape photography, demonstrating the effect of the ND1000 filter on water movement.

Comparison of a street photography scene with and without the K&F Concept ND1000 filter, showing how moving elements are blurred or removed with the filter.

Image: Example of street photography, illustrating how the ND1000 filter can eliminate traces of moving crowds.

Maintenance

To ensure the longevity and optimal performance of your K&F Concept ND1000 filter, follow these maintenance guidelines:

  • Cleaning: Use a soft, clean microfiber cloth specifically designed for optical surfaces. For stubborn smudges or fingerprints, a small amount of lens cleaning solution can be applied to the cloth (not directly to the filter). The hydrophobic and anti-oil coatings make cleaning easier.
  • Storage: Always store the filter in its protective case when not in use to prevent dust accumulation and scratches.
  • Handling: Avoid touching the glass surface directly with your fingers. Hold the filter by its metal frame.
Demonstration of water beading on the K&F Concept filter due to waterproof coatings, compared to a filter without coating.

Image: The filter's water and dust-resistant coatings facilitate easy cleaning.

A knife blade touching the filter surface, demonstrating its anti-scratch coating.

Image: The anti-scratch coating helps resist daily wear and tear.

Troubleshooting

  • Vignetting (Dark Corners): The K&F Concept Nano-X Series filters are designed with an ultra-slim frame to minimize vignetting, especially on wide-angle lenses. If vignetting occurs, ensure the filter is correctly mounted and consider if multiple filters are stacked.
  • Color Cast: This ND1000 filter is engineered to prevent color cast. If you observe a slight color shift, check your camera's white balance settings. Minor adjustments can typically correct any perceived shift.
  • Difficulty Attaching/Removing: Ensure the filter size matches your lens thread exactly. If it's stiff, check for cross-threading. Avoid forcing the filter.
Comparison image showing a scene without vignetting using a K&F Concept filter versus a scene with vignetting using another brand's filter at 14mm focal length.

Image: The K&F Concept filter is designed to prevent vignetting, even at wide focal lengths like 14mm.

Comparison of two landscape photos, one taken with a K&F Concept filter showing natural colors, and another with a different brand's filter showing a strong yellow color cast.

Image: The K&F Concept filter maintains accurate color rendition, avoiding unwanted color casts.

Specifications

Model NumberKF01.897
Filter TypeNeutral Density (Fixed)
DensityND1000 (10-Stop Light Reduction)
Filter Size82mm
MaterialJapanese AGC Optical Glass, Aviation Aluminum Alloy Frame
Coatings28 Multi-Layer Nano-Coatings (Hydrophobic, Scratch-Resistant, Anti-Reflective)
Reflectivity0.2%
Water ResistanceWaterproof
Product Dimensions4.65 x 4.65 x 1.06 inches (packaging) / 3.23"L x 3.23"W (filter)
Item Weight2.82 ounces

Warranty and Support

K&F Concept products are designed for durability and performance. For information regarding warranty coverage, technical support, or service, please refer to the official K&F Concept website or contact their customer service directly. Keep your purchase receipt as proof of purchase.

Video: This video provides insight into the machining technology and quality control processes behind K&F Concept filters.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.