Orient Electric Wall-14 300mm Wall Fan

1. Introduction

Thank you for choosing the Orient Electric Wall-14 300mm Wall Fan. This manual provides essential information for the safe and efficient operation, installation, and maintenance of your new wall-mounted fan. Please read this manual thoroughly before installation and use, and retain it for future reference.

Figure 1: The Orient Electric Wall-14 300mm Wall Fan, featuring a crystal white body, a protective metal grill, and light blue transparent blades. The control panel with speed and oscillation pull cords is visible at the bottom.

2. Package Contents

Upon opening the package, please verify that all components are present and undamaged.

• Motor and Neck Assembly
• Fan Blades (3 pieces, aerodynamically designed resin blades)
• Front Guard
• Rear Guard
• Guard Ring (Polymer)
• Warranty Card
• User Manual (this document)

3. Safety Instructions

To reduce the risk of fire, electric shock, or injury, always follow these basic safety precautions:

• Ensure the power supply voltage matches the fan's rating before connecting.
• Do not operate the fan with a damaged cord or plug.
• Keep fingers, pencils, or any other objects away from the fan blades when in operation.
• Unplug the fan from the power outlet when moving it from one location to another, before cleaning, or when not in use.
• Do not use the fan in wet or damp locations, such as bathrooms or laundries.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• The motor is protected through a thermal overload protection device. If the fan stops unexpectedly, unplug it and allow it to cool down before attempting to restart.

4. Setup and Installation

The Orient Electric Wall-14 fan is designed for wall mounting. Professional installation is recommended.

4.1 Mounting the Fan

1. Choose a suitable wall location that is sturdy enough to support the fan's weight and allows for proper air circulation. Ensure it is away from curtains or other objects that could interfere with the blades.
2. Mark the drilling points on the wall using the mounting bracket of the motor assembly as a template.
3. Drill holes and insert appropriate wall plugs (not supplied).
4. Secure the motor and neck assembly to the wall using screws (not supplied), ensuring it is firmly attached.

4.2 Assembling the Fan

1. Attach the rear guard to the motor housing, aligning the notches and securing it with the provided fasteners.
2. Slide the fan blades onto the motor shaft, ensuring they are correctly oriented and secured with the blade cap.
3. Place the front guard over the blades, aligning it with the rear guard.
4. Secure the front and rear guards together using the polymer guard ring and any clips or screws provided. Ensure the guard is securely fastened to prevent accidental contact with the blades.
5. Connect the power cord to a suitable electrical outlet.

5. Operating Instructions

Your Orient Electric Wall-14 fan features convenient pull cord controls for speed and oscillation.

5.1 Speed Control

• The fan has 3 speed settings.
• Pull the speed control cord (typically the one labeled "AIR" or with fan blade icons) to cycle through the speeds: Off (0), Low (1), Medium (2), High (Full).
• Pulling the cord again will advance to the next speed or turn the fan off.

5.2 Oscillation Control

• The fan features a 90-degree oscillation function to distribute air across a wider area.
• Pull the oscillation control cord (typically the one labeled "OSC" or with arrow icons) to turn the oscillation function On or Off.
• When oscillation is On, the fan head will sweep from side to side.

5.3 Tilt Adjustment

• The fan head can be manually adjusted for upward and downward tilt.
• Loosen the side screw on the fan neck, adjust the fan head to the desired angle, and then tighten the screw firmly to secure the position.

6. Maintenance

Regular cleaning and maintenance will ensure the longevity and optimal performance of your fan.

6.1 Cleaning

• Always unplug the fan before cleaning.
• Use a soft, damp cloth to wipe the exterior surfaces of the fan. Do not use abrasive cleaners or solvents.
• To clean the blades and inside the guard, carefully remove the front guard (refer to assembly instructions in Section 4.2). Wipe the blades and motor housing with a soft, dry or slightly damp cloth.
• Ensure all parts are completely dry before reassembling the fan and plugging it back in.
• Do not immerse the fan in water or any other liquid.

6.2 Storage

• If storing the fan for an extended period, clean it thoroughly and store it in its original packaging or a suitable box in a cool, dry place.

7. Troubleshooting

Before contacting customer service, please refer to the following common issues and their solutions:

8. Specifications

9. Warranty and Support

The Orient Electric Wall-14 300mm Wall Fan comes with a 2-year warranty on the product from the date of purchase. Please retain your purchase receipt for warranty claims.

For technical assistance, troubleshooting beyond this manual, or warranty service, please contact Orient Electric customer support.

• Customer Service: Refer to the contact information provided on your warranty card or the official Orient Electric website.
• Website: www.orientelectric.com (Example link, actual link may vary)