Moen Host Series GXS75C 3/4 HP Continuous Feed Garbage Disposal User Manual

Introduction

This manual provides essential information for the installation, operation, and maintenance of your Moen Host Series GXS75C 3/4 HP Continuous Feed Garbage Disposal. Please read these instructions carefully before use and retain for future reference.

Key Features

• Continuous Feed: Designed for continuous operation, allowing food waste to be added while the unit is running.
• Powerful Grinding: Equipped with a 2,700 RPM, 3/4 horsepower Vortex motor for fast and efficient grinding of tough food scraps, reducing jamming.
• Sound Reduction: Features SoundSHIELD sound-deadening insulation for quieter operation.
• Easy Installation: Simple Swap design fits most existing 3-bolt assemblies and includes a pre-installed power cord for convenience.
• Septic Safe: Compatible with properly sized septic tanks.
• 360° Clean Rinse: An exclusive feature that helps eliminate odors by ensuring thorough rinsing.

Illustrations of Vortex Motor and SoundSHIELD features.

Setup & Installation

Included Components:

Image showing the Moen GXS75C garbage disposal and its included components: disposal unit, drain stopper, 360° Clean Rinse splash guard, sink flange, drain elbow and mounting assembly, and pre-installed power cord.

• Disposal Unit (3/4 HP)
• Drain Elbow and Mounting Assembly
• Drain Stopper
• Pre-Installed Power Cord
• Sink Flange

Installation Overview:

1. Prepare the Sink Opening: Ensure the sink opening is clean and free of debris. Apply plumber's putty around the sink flange to create a watertight seal.
2. Install Sink Flange: Insert the sink flange into the drain opening from above the sink. Secure it from below with the fiber gasket, backup flange, and mounting ring.
3. Attach Disposal Unit: Align the disposal unit with the mounting ring and twist to lock it into place. The XPRESS Mount system simplifies this step.
4. Connect Drain Plumbing: Attach the drain elbow to the disposal unit and connect it to your household drain system. Ensure all connections are tight and leak-free.
5. Connect Dishwasher Drain: If applicable, connect your dishwasher drain hose to the designated inlet on the disposal unit.
6. Electrical Connection: The unit comes with a pre-installed power cord. Plug it into a grounded outlet. For hardwired installations, consult a qualified electrician.

Image showing the Moen GXS75C garbage disposal unit installed neatly under a kitchen sink, connected to plumbing and power.

Installation Video Guide:

Operating Instructions

1. Turn on Cold Water: Always turn on a medium stream of cold water before and during the operation of the disposal.
2. Activate Disposal: Flip the wall switch or press the air switch to turn on the disposal.
3. Feed Food Waste: Gradually feed food waste into the disposal opening. The continuous feed design allows you to add waste while the unit is running.
4. Continue Running Water: Allow the cold water to run for at least 15 seconds after the grinding stops to flush all particles through the drain.
5. Turn Off Disposal: Turn off the disposal unit.
6. Turn Off Water: Turn off the cold water.

Acceptable Food Waste:

• Small fruit pits
• Lemon rinds
• Banana peels
• Small bones
• Cooked meats
• Most vegetable scraps

Image illustrating food scraps being rinsed into the garbage disposal.

360° Clean Rinse Feature:

The exclusive 360° Clean Rinse feature provides additional water flow to clear food scraps that can cause odor, ensuring a more complete rinse and maintaining freshness in your sink.

Diagram illustrating the 360° Clean Rinse technology, showing how additional water clears food scraps to prevent odors compared to standard designs.

Maintenance

• Regular Flushing: Always run cold water for at least 15 seconds after grinding to ensure all food particles are flushed completely through the drain system.
• Cleaning: For general cleaning and odor prevention, grind small citrus peels (lemon, orange) with cold water. This helps to clean the grinding chamber and freshen the drain.
• Avoid Harsh Chemicals: Do not use drain cleaners or harsh chemicals in your disposal, as they can damage the unit and plumbing.

Troubleshooting

The Moen Host Series GXS75C is designed to reduce jamming with its powerful Vortex motor. If the unit stops operating, check the following:

• Power Supply: Ensure the disposal is properly plugged into a working electrical outlet. Check your circuit breaker or fuse box if the outlet has no power.
• Overload Protection: The unit may have an internal overload protector that trips if the motor is overworked. Allow the motor to cool for a few minutes, then press the red reset button located on the bottom of the disposal (if applicable, consult your specific model's diagram).
• Jamming: If the motor hums but does not grind, an object may be lodged in the grinding chamber. Turn off the power to the disposal. Use a flashlight to look into the drain opening for any foreign objects. If an object is visible, carefully remove it with pliers or tongs. Never use your hand.
• Leaking: Check all plumbing connections for tightness. Ensure the sink flange is properly sealed with plumber's putty.

Specifications

Diagram illustrating the key dimensions and connection points of the Moen GXS75C garbage disposal.

Warranty & Support

The Moen Host Series GXS75C Garbage Disposal is backed by a 10-year limited warranty with in-home service. For warranty claims, technical support, or further assistance, please contact Moen customer service or visit the official Moen website.

For more information, visit the Moen Store.