1. Introduction
This manual provides essential instructions for the proper setup, operation, and maintenance of your Compulocks Standard Mounting Component, model TCDP8FB. This product is designed as a free-standing base specifically for the Compulocks RISE Pole, offering a stable foundation for your tablet or device enclosure setup.
Please read this manual thoroughly before installation and retain it for future reference.
2. What's in the Box
Upon opening the package, please verify that all components are present and undamaged:
- Compulocks mounting component (Free Standing Base)
Note: The RISE Pole and tablet enclosure are sold separately.
3. Setup Instructions
Follow these steps to properly set up your Compulocks Free Standing Base:
- Unpack Components: Carefully remove the free-standing base from its packaging. Inspect for any signs of damage.
- Identify Mounting Points: The base features a central circular opening and four screw holes arranged around it. These are designed to align with the bottom of the Compulocks RISE Pole.
- Attach RISE Pole (Sold Separately): Align the bottom of your Compulocks RISE Pole with the mounting points on the free-standing base. Secure the pole to the base using the appropriate screws provided with the RISE Pole. Ensure all screws are tightened securely to prevent wobbling.
- Position the Stand: Place the assembled stand on a flat, stable surface. Ensure there are no obstructions that could cause the stand to tip over.
Image 1: Top view of the Compulocks TCDP8FB Free Standing Base. This image shows the flat, square top surface of the black base with a central circular opening and four smaller screw holes surrounding it, designed for attaching the RISE Pole. The Compulocks logo is visible at the bottom center.
Image 2: Bottom view of the Compulocks TCDP8FB Free Standing Base. This image displays the underside of the black base, revealing a reinforced structure with raised edges and a central recessed area with four screw holes, matching the top view's mounting points.
4. Operating Instructions
The Compulocks Free Standing Base provides a stable platform for your Compulocks RISE Pole and attached device. Once assembled, no further operational steps are required for the base itself.
- Stability Check: Periodically check the stability of the entire stand assembly. Ensure the base is on a level surface and the pole is securely fastened.
- Relocation: When moving the stand, lift it by the base to maintain structural integrity. Avoid dragging the stand, especially on uneven surfaces.
5. Maintenance
To ensure the longevity and proper function of your Compulocks Free Standing Base, follow these simple maintenance guidelines:
- Cleaning: Wipe the base with a soft, damp cloth. Avoid using abrasive cleaners or solvents, as these may damage the finish.
- Fastener Check: Regularly inspect all screws and fasteners connecting the base to the RISE Pole. Tighten any loose connections to maintain stability.
- Storage: If storing the base for an extended period, keep it in a dry, cool place away from direct sunlight and extreme temperatures.
6. Troubleshooting
This section addresses common issues you might encounter with your Compulocks Free Standing Base.
Issue: Stand feels unstable or wobbly.
- Solution 1: Ensure the base is placed on a completely flat and level surface. Uneven surfaces can cause instability.
- Solution 2: Check all screws connecting the RISE Pole to the base. Tighten any loose screws using an appropriate screwdriver.
- Solution 3: Verify that the RISE Pole itself is correctly assembled and secured to any attached tablet enclosures.
Issue: Base appears damaged.
- Solution: If the base is physically damaged (cracked, bent), it may compromise the stability of your setup. Contact Compulocks customer support for assistance or replacement options.
7. Specifications
| Attribute | Detail |
|---|---|
| Brand | Compulocks |
| Model Number | TCDP8FB |
| Product Type | Mounting Component (Free Standing Base) |
| Color | Black |
| Item Weight | 0.48 ounces (approx. 13.6 grams) |
| Product Dimensions | 0.03 x 0.03 x 0.03 inches (Note: These dimensions seem unusually small and may refer to packaging or internal component. Actual base dimensions are larger for an 8" base.) |
| Compatible Devices | Compulocks RISE Pole |
| Mounting Type | Free Standing, Pole |
| Special Features | Adjustable (This likely refers to the overall stand system, not just the base) |
| Country of Origin | China |
Note: Product specifications are subject to change without notice.
8. Warranty and Support
Compulocks products are manufactured to high-quality standards. For information regarding warranty coverage, technical support, or replacement parts, please visit the official Compulocks website or contact their customer service department.
Contact Information:
- Website: www.compulocks.com (Please refer to the website for the most current contact details.)
Please have your product model number (TCDP8FB) and purchase information ready when contacting support.
