Georgia Pacific 59009 Jumbo Jr. Bathroom Tissue Dispenser

Introduction

This manual provides essential information for the proper installation, operation, and maintenance of your Georgia-Pacific 59009 Jumbo Jr. Bathroom Tissue Dispenser. Please read these instructions carefully before use to ensure optimal performance and longevity of the product.

The Georgia-Pacific 59009 is a durable, high-capacity bathroom tissue dispenser designed for commercial and institutional environments. It is engineered to offer cost-saving performance by accommodating jumbo 9-inch tissue rolls, which are equivalent to approximately 5.4 rolls of standard two-ply tissue. Its translucent smoke cover provides an attractive appearance that complements various decors, while the locking design helps prevent pilferage and facilitates easy refilling.

Safety Information

• Always ensure the dispenser is securely mounted to a stable surface to prevent accidental falls.
• Use only the recommended jumbo tissue rolls (9-inch diameter) for proper operation.
• Keep the dispenser locked when not refilling to prevent unauthorized access and pilferage.
• Avoid using abrasive cleaners or solvents on the dispenser's surface, as this may damage the finish.
• Keep small parts, such as keys, out of reach of children.

Package Contents

Upon opening the package, verify that all components are present and undamaged. The standard package for the Georgia-Pacific 59009 Jumbo Jr. Bathroom Tissue Dispenser should include:

• 1 x Georgia-Pacific 59009 Jumbo Jr. Bathroom Tissue Dispenser (Translucent Smoke)
• 1 x Mounting Hardware Kit (screws, anchors)
• 1 x Dispenser Key
• 1 x Installation Template (if applicable, not explicitly mentioned but common)

Setup and Installation

Proper installation is crucial for the dispenser's functionality and security. Follow these steps carefully:

1. Choose Location: Select a suitable wall location in the restroom, ensuring it is at an appropriate height for users and clear of obstructions. Consider local accessibility guidelines.
2. Prepare Surface: Ensure the mounting surface is clean, dry, and structurally sound.
3. Mark Drilling Points: Use the provided installation template (if available) or measure and mark the drilling points for the mounting screws. Typically, four mounting points are required.
4. Drill Holes: Using an appropriate drill bit for your wall type (e.g., masonry bit for concrete, wood bit for studs), drill pilot holes at the marked locations. If installing into drywall without studs, insert wall anchors.
5. Mount Dispenser: Align the dispenser's mounting holes with the drilled holes. Insert the screws through the dispenser and into the wall anchors or studs. Tighten the screws securely, but do not overtighten, to avoid cracking the dispenser housing.
6. Test Stability: Gently tug on the dispenser to ensure it is firmly attached to the wall.

Operating Instructions

Loading Tissue Rolls

The Georgia-Pacific 59009 dispenser is designed to hold two jumbo 9-inch tissue rolls, ensuring continuous service and reducing the frequency of refills. The efficient design restricts access to the second roll until the first roll is completely used.

1. Unlock Dispenser: Insert the provided key into the lock mechanism, usually located on the top or side of the dispenser, and turn to unlock. The front cover will typically swing open.
2. Remove Empty Core (if applicable): If an empty roll core is present, remove it from the spindle.
3. Load First Roll: Place a new jumbo 9-inch tissue roll onto the primary spindle. Ensure the tissue feeds from the bottom of the roll towards the dispensing opening.
4. Load Second Roll (if needed): If the dispenser is designed for two rolls, place the second roll onto the secondary spindle. This roll will become accessible once the first roll is depleted.
5. Close and Lock: Close the front cover of the dispenser firmly until it clicks into place. Turn the key to the locked position and remove it.

Dispensing Tissue

Users can pull tissue from the bottom opening of the dispenser. The design ensures smooth dispensing and prevents excessive pulling, contributing to waste reduction.

Maintenance

Regular cleaning and simple maintenance will keep your dispenser in optimal condition.

• Cleaning: Wipe the exterior of the dispenser regularly with a soft, damp cloth and a mild, non-abrasive cleaner. Avoid harsh chemicals, ammonia-based cleaners, or abrasive pads, as these can scratch or dull the translucent smoke finish.
• Inspection: Periodically check the mounting screws for tightness. Ensure the lock mechanism operates smoothly.
• Key Management: Keep the dispenser key in a secure location to prevent loss and ensure easy access for refilling.

Troubleshooting

Specifications

Warranty and Support

Georgia-Pacific stands behind the quality of its products. For specific warranty details, including coverage period and terms, please refer to the warranty card included with your purchase or visit the official Georgia-Pacific website. Keep your proof of purchase for warranty claims.

For technical assistance, replacement parts, or further inquiries, please contact Georgia-Pacific Customer Support:

• Website: www.gp.com (Please check the official website for the most current contact information.)
• Phone: Refer to the product packaging or official website for customer service phone numbers.

When contacting support, please have your product model number (GPC59009) and ASIN (B01DJBE0VQ) readily available.