Hubbardton Forge 205427D-SG-07-NO Quad Large LED Sconce Instruction Manual

Important Safety Information

• WARNING: Risk of electric shock. Disconnect power at the fuse box or circuit breaker before installation or servicing.
• Read all instructions carefully before beginning installation.
• All wiring must be in accordance with national and local electrical codes. If you are unsure about wiring, consult a qualified electrician.
• Do not install this fixture in wet locations unless specifically rated for such use.
• Handle LED components with care. Do not touch the LED directly.
• Ensure the fixture is securely mounted to a structural element.

Product Overview

The Hubbardton Forge Quad Large LED Sconce (Model 205427D-SG-07-NO) is a minimalist wall-mounted fixture featuring a concealed LED light source. It provides a downward light that highlights the textured inner edge of its metal frame. This fixture is designed for indoor use and offers energy-efficient LED lighting.

Image 1: Hubbardton Forge Quad Large LED Sconce (Model 205427D-SG-07-NO) in Dark Smoke finish. This image shows the full sconce, highlighting its rectangular shape and the downward light emission.

Image 2: Close-up of various metal samples, illustrating the different textures and finishes used in Hubbardton Forge products. This includes smooth, brushed, and hammered metal surfaces in dark tones.

Package Contents

Verify that all components are present before beginning installation. If any parts are missing or damaged, do not proceed with installation and contact customer support.

• Hubbardton Forge Quad Large LED Sconce fixture (1)
• Mounting hardware kit (screws, wire nuts, mounting plate) (1)
• Installation instructions (this manual) (1)

Tools Required (Not Included)

• Phillips head screwdriver
• Flathead screwdriver
• Wire strippers
• Electrical tape
• Voltage tester
• Pliers
• Safety glasses

Setup and Installation

1. Turn Off Power: Before starting, ensure the power to the circuit is turned off at the main electrical panel (circuit breaker or fuse box). Verify power is off using a voltage tester.
2. Prepare Mounting Location: Remove any existing fixture and its mounting hardware from the wall junction box.
3. Install Mounting Plate: Attach the provided mounting plate to the junction box using the screws supplied. Ensure the plate is securely fastened and level.
4. Make Electrical Connections:
   • Connect the green or bare copper ground wire from the fixture to the ground wire from the junction box (usually bare copper or green). Secure with a wire nut.
   • Connect the white (neutral) wire from the fixture to the white (neutral) wire from the junction box. Secure with a wire nut.
   • Connect the black (hot) wire from the fixture to the black (hot) wire from the junction box. Secure with a wire nut.
   • Ensure all wire connections are tight and secure. Wrap electrical tape around wire nuts for added insulation.
5. Mount the Fixture: Carefully align the fixture with the mounting plate and secure it using the provided screws. Do not overtighten.
6. Restore Power: Once the fixture is securely installed, restore power at the main electrical panel.
7. Test Fixture: Turn on the light switch to ensure the fixture is operating correctly.

Operating Instructions

The Hubbardton Forge Quad Large LED Sconce is operated by a standard wall switch connected to its electrical circuit. Simply toggle the wall switch to turn the fixture on or off.

• Ensure the fixture is properly installed and connected to a power source.
• Use the designated wall switch to control the light.
• This fixture uses integrated LED lighting and does not require bulb replacement.

Maintenance

Proper maintenance ensures the longevity and appearance of your Hubbardton Forge fixture.

• Cleaning:
  • Always disconnect power before cleaning.
  • Wipe the fixture with a soft, dry, or slightly damp cloth.
  • Do not use abrasive cleaners, solvents, or polishes as they may damage the finish.
• LED Care: The integrated LED light source is designed for long-term use and does not require routine maintenance or replacement.
• Inspection: Periodically check the fixture for any loose connections or signs of wear. If any issues are found, disconnect power and consult a qualified electrician.

Troubleshooting

Specifications

Warranty Information

This Hubbardton Forge fixture comes with a Lifetime Limited Warranty when installed in a residential setting. This warranty covers defects in materials and workmanship under normal use and service. For full warranty details and terms, please refer to the official Hubbardton Forge website or contact their customer service.

Customer Support

If you have any questions, require assistance with installation, or need to report a missing/damaged part, please contact Hubbardton Forge customer support.

• Website: www.hubbardtonforge.com (for general inquiries and product information)
• Contact Information: Refer to the official website for the most current contact details, including phone numbers and email addresses.