1. Introduction
Thank you for choosing the Sunlite LFX/DCO18/23W/BN/E/30K LED Flush Mount Lighting Fixture. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions thoroughly before installation and retain them for future reference.
This LED fixture is designed to provide efficient and comfortable 3000K Warm White light, consuming only 23 watts of energy. It is suitable for various indoor settings such as dining rooms, offices, and living rooms, offering significant energy savings and a long operational life of approximately 50,000 hours.
2. Safety Information
- WARNING: Risk of electric shock. Disconnect power at the fuse or circuit breaker before installation or servicing.
- CAUTION: All wiring connections must be in accordance with local and national electrical codes (NEC). If you are unfamiliar with proper electrical wiring connections, consult a qualified electrician.
- Do not install this fixture with wet hands or while standing on a wet surface.
- Ensure the fixture is securely mounted to a structurally sound surface.
- This fixture is for indoor use only. Do not expose to water or moisture.
- Do not attempt to modify the fixture. Any modifications may void the warranty and create a safety hazard.
- Do not look directly into the LED light source when illuminated.
3. Package Contents
Verify that all components are present before beginning installation:
- Sunlite LFX/DCO18/23W/BN/E/30K LED Flush Mount Lighting Fixture (1)
- Mounting Hardware (Screws, Wire Nuts)
- Instruction Manual (This document)
Figure 1: Sunlite LFX/DCO18/23W/BN/E/30K LED Flush Mount Lighting Fixture. This image shows the complete fixture with its brushed nickel finish and frosted diffuser.
4. Installation Instructions
Tools Required: Phillips head screwdriver, flathead screwdriver, wire strippers, electrical tape, safety glasses.
- Turn Off Power: Locate the circuit breaker or fuse box that controls the power to the light fixture location. Turn off the power completely to prevent electrical shock.
- Remove Old Fixture (if applicable): Carefully remove any existing light fixture. Disconnect the wiring and remove the mounting bracket.
- Prepare Wiring: Ensure that the electrical wires from the junction box are stripped approximately 1/2 inch (1.27 cm) at the ends.
- Mounting Bracket Installation: Attach the fixture's mounting bracket to the junction box in the ceiling using the provided screws. Ensure it is securely fastened.
- Wire Connections:
- Connect the black wire from the fixture to the black (hot) wire from the junction box using a wire nut.
- Connect the white wire from the fixture to the white (neutral) wire from the junction box using a wire nut.
- Connect the green or bare copper (ground) wire from the fixture to the green or bare copper (ground) wire from the junction box using a wire nut.
- Ensure all wire nuts are tightened securely and no bare wire is exposed. Wrap electrical tape around each wire nut connection for added security.
- Secure Fixture: Carefully tuck all wires into the junction box. Align the fixture with the mounting bracket and secure it in place using the provided screws or twist-lock mechanism, depending on the design. Ensure the fixture is flush with the ceiling.
- Restore Power: Once the fixture is securely installed and all connections are checked, restore power at the circuit breaker or fuse box.
- Test Fixture: Turn on the light switch to test the new fixture.
5. Operating Instructions
This Sunlite LED fixture operates like a standard light fixture. Simply use your wall switch to turn it on or off.
Dimming Functionality: This fixture is dimmable. To utilize the dimming feature, ensure you have a compatible LED-rated dimmer switch installed on your wall. Follow the dimmer switch manufacturer's instructions for proper operation.
Figure 2: Light Color Temperature Comparison Chart. This chart illustrates various Kelvin temperatures and their corresponding light appearances, from warm white to daylight. This fixture provides 3000K Warm White light.
6. Maintenance
- Cleaning: Before cleaning, ensure the power to the fixture is turned off at the circuit breaker. Use a soft, dry, or slightly damp cloth to wipe the exterior of the fixture. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish or electrical components.
- LED Light Source: The LED light source in this fixture is non-removable and designed for a long lifespan. Do not attempt to replace the LEDs.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Fixture does not light up. |
|
|
| Light flickers or dims improperly. |
|
|
| Humming noise from fixture. |
|
|
8. Specifications
| Model Number | LFX/DCO18/23W/BN/E/30K |
| Brand | Sunlite |
| Light Source Type | Integrated LED |
| Wattage | 23 Watts |
| Brightness | 1610 Lumens |
| Color Temperature | 3000 Kelvin (Warm White) |
| Voltage | 120 Volts |
| Dimmable | Yes (with compatible LED dimmer) |
| Finish | Brushed Nickel |
| Material | Alloy Steel, Glass |
| Lifespan | Approx. 50,000 hours |
| Certifications | ETL, Energy Star |
| Item Weight | 5.2 Pounds |
| Installation Type | Flush Mount |
| Usage | Indoor use only |
Figure 3: Lighting Facts Label. This label provides key performance metrics for the fixture, including brightness (1610 lumens), estimated yearly energy cost ($2.77), lifespan (45.7 years based on 3 hrs/day), light appearance (3000K Warm), and energy used (23 watts).
9. Warranty and Support
For warranty information or technical support, please contact Sunlite customer service. Refer to the product packaging or the official Sunlite website for the most current contact details.
Online Resources: You can visit the official Sunlite store on Amazon for more product information and support: Sunlite Amazon Store
