NEXTORCH Saint Torch 10 User Manual

Introduction

The NEXTORCH Saint Torch 10 is an ultra-bright rechargeable search light designed for high performance and extended use. It features a single Cree XHP70 LED, delivering a powerful beam of up to 3200 lumens. Equipped with a 10400mAh high-capacity rechargeable battery pack, it provides up to 120 hours of light. The 16.8V AC direct quick charge design allows for a full charge in approximately 4 hours. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your Saint Torch 10.

Safety Information

Please read all safety warnings and instructions carefully before using this product. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.

• Do not look directly into the light beam. The high intensity light can cause temporary vision impairment or permanent eye damage.
• Keep out of reach of children.
• Do not disassemble the flashlight or battery pack. Refer all servicing to qualified personnel.
• Use only the provided charger and battery pack. Using unauthorized accessories may damage the product and void the warranty.
• Avoid exposing the flashlight to extreme temperatures or direct sunlight for prolonged periods.
• Ensure the charging port is clean and dry before connecting the charger.

Package Contents

Image: The Saint Torch 10 flashlight, its charger, and a sling, neatly organized within its durable protective carrying case.

Verify that all items are present and in good condition upon opening the package:

• NEXTORCH Saint Torch 10 Flashlight
• 10400mAh Rechargeable Battery Pack (pre-installed or separate)
• AC Direct Quick Charger
• Shoulder Sling
• Protective Polymer Case
• User Manual (this document)

Product Overview

Image: A detailed view of the NEXTORCH Saint Torch 10 flashlight, highlighting its large reflector and textured body. A "HOT" warning symbol is visible near the head.

The Saint Torch 10 features a robust design with intuitive controls. Key components include:

• Head/Reflector: Houses the Cree XHP70 LED and proprietary scale reflection system for optimal beam focus.
• Control Button: A single button for power on/off and mode selection.
• LED Battery Charge Indicator: Four small LEDs indicating remaining battery power.
• Body: Durable aluminum alloy construction with anti-slip knurling.
• Charging Port: Located on the body for direct AC charging.
• Tail Cap: Secures the battery pack.

Image: A close-up view of the flashlight's side, showing the rectangular control button and the four small circular LED battery indicators.

Setup

1. Battery Installation (if not pre-installed)

Image: The Saint Torch 10 flashlight with its main body separated from the battery compartment, revealing the internal connections.

1. Unscrew the tail cap or the main body section of the flashlight.
2. Insert the 10400mAh rechargeable battery pack with the positive (+) terminal facing towards the head of the flashlight.
3. Carefully screw the tail cap or body section back on, ensuring it is fully tightened to maintain water resistance.

2. Initial Charging

Image: The Saint Torch 10 flashlight lying next to its AC charger, with the charging cable connected to the flashlight's charging port.

1. Locate the charging port on the flashlight body.
2. Connect the AC direct quick charger to the flashlight's charging port.
3. Plug the charger into a standard AC power outlet (16.8V).
4. The LED battery indicators will illuminate to show charging progress. A full charge takes approximately 4 hours.
5. Once fully charged, disconnect the charger from the flashlight and the power outlet.

Operating Instructions

Power On/Off

• Press and hold the control button for approximately 1 second to turn the flashlight ON or OFF.

Mode Selection

With the flashlight ON, short press the control button to cycle through different brightness modes (e.g., Low, Medium, High, Turbo). The sequence may vary based on the specific firmware version.

Special Modes (Strobe/SOS)

To access special modes like Strobe or SOS, typically a quick double-press or triple-press of the control button is required. Refer to the quick start guide included with your product for exact activation sequences.

Battery Indicator

The four LED indicators on the body provide real-time battery status:

• 4 LEDs: 75-100% battery
• 3 LEDs: 50-75% battery
• 2 LEDs: 25-50% battery
• 1 LED: Below 25% battery, recharge soon.

Maintenance

• Cleaning: Wipe the flashlight body with a soft, damp cloth. Do not use abrasive cleaners or solvents. Keep the lens clean for optimal light output.
• O-rings: Periodically inspect and lubricate the O-rings with silicone grease to maintain water resistance. Replace if damaged.
• Battery Care: For long-term storage, charge the battery pack to approximately 50% and store in a cool, dry place. Recharge every 3-6 months to prevent deep discharge.
• Storage: Store the flashlight and its accessories in the provided protective polymer case when not in use to prevent damage.

Image: The closed, black, rugged protective polymer case with the NEXTORCH logo embossed on the front, designed for storing the Saint Torch 10.

Troubleshooting

Specifications

Warranty and Support

NEXTORCH products are manufactured to high quality standards. For warranty information, product registration, or technical support, please refer to the official NEXTORCH website or contact their customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.

For further assistance, please visit: www.nextorch.com