Introduction
This manual provides comprehensive instructions for the safe and efficient use of your Orbegozo SF0147 Pedestal Fan. Please read this manual thoroughly before operating the appliance and retain it for future reference. Proper use and maintenance will ensure optimal performance and longevity of your fan.
Figure 1: Front view of the Orbegozo SF0147 Pedestal Fan. This image shows the fan head with three blades, the protective grille, the control panel on the stand, and the stable round base.
Safety Instructions
- Always ensure the fan is placed on a stable, flat surface to prevent tipping.
- Do not insert fingers or any objects through the grille when the fan is operating.
- Unplug the fan from the power outlet before cleaning or performing any maintenance.
- Keep the fan away from water or other liquids. Do not use in damp or wet environments.
- Do not operate the fan with a damaged cord or plug. Contact qualified service personnel for repair.
- This appliance is for indoor household use only.
- Supervise children to ensure they do not play with the appliance.
Setup
Follow these steps to assemble your Orbegozo SF0147 Pedestal Fan:
- Carefully unpack all components from the box. Ensure all parts are present: fan head, front and rear grilles, blades, motor unit, stand pole (upper and lower sections), base, and fastening nuts/screws.
- Attach the stand pole to the base. Secure it firmly using the provided fasteners.
- Mount the motor unit onto the top of the stand pole.
- Attach the rear grille to the motor unit, ensuring it is properly aligned and secured.
- Install the fan blades onto the motor shaft. Secure with the blade cap.
- Attach the front grille to the rear grille, ensuring all clips are securely fastened.
- Adjust the height of the fan by loosening the height adjustment knob on the stand, extending or retracting the pole, and then tightening the knob firmly.
Figure 2: Close-up of the fan's base and adjustable pole connection. This image highlights the secure fitting mechanism between the main stand and the circular base, ensuring stability.
Figure 3: Side view of the Orbegozo SF0147 Pedestal Fan. This perspective shows the depth of the fan head, the angle of the stand, and the overall slim profile of the appliance.
Operating Instructions
Your Orbegozo SF0147 Pedestal Fan features simple controls for ease of use.
Control Panel
Figure 4: Detailed view of the control panel on the Orbegozo SF0147 Pedestal Fan. This image clearly shows the push buttons for power and speed settings (0, 1, 2, 3).
- Power On/Off: Press the '0' button to turn the fan off. Press '1', '2', or '3' to turn the fan on at the desired speed.
- Speed Settings: The fan has 3 speed settings:
- 1: Low speed
- 2: Medium speed
- 3: High speed
- Oscillation Function: To activate the oscillation, pull up the oscillation knob located on top of the motor housing. To stop oscillation, push the knob down.
- Tilt Adjustment: The fan head can be tilted up or down to direct airflow. Gently push or pull the fan head to the desired angle.
Figure 5: Orbegozo SF0147 Pedestal Fan demonstrating its 90-degree oscillation feature. This image visually represents the fan's ability to sweep air across a wide area.
Figure 6: Close-up of the rear motor housing of the Orbegozo SF0147 Pedestal Fan, showing the oscillation control knob. This knob is used to engage or disengage the fan's oscillating movement.
Maintenance
Regular cleaning and maintenance will help prolong the life of your fan.
- Cleaning:
- Always unplug the fan before cleaning.
- Use a soft, damp cloth to wipe the exterior surfaces of the fan. Do not use abrasive cleaners or solvents.
- To clean the fan blades and inside the grilles, carefully remove the front grille. Wipe the blades with a damp cloth. Ensure all parts are completely dry before reassembling and operating the fan.
- Do not immerse the fan in water or any other liquid.
- Storage: When not in use for extended periods, store the fan in a cool, dry place, preferably in its original packaging to protect it from dust and damage.
Troubleshooting
If you encounter issues with your Orbegozo SF0147 Pedestal Fan, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan does not turn on. | No power supply. Fan not plugged in. Power button not pressed. | Check if the power outlet is working. Ensure the fan is securely plugged into a working outlet. Press one of the speed buttons (1, 2, or 3). |
| Weak airflow. | Fan blades or grilles are dirty. Incorrect speed setting. | Unplug the fan and clean the blades and grilles as per the Maintenance section. Select a higher speed setting (2 or 3). |
| Fan is noisy. | Loose parts. Fan not on a stable surface. | Check for any loose screws or components and tighten them. Place the fan on a flat, stable surface. |
| Oscillation not working. | Oscillation knob is pushed down. | Pull the oscillation knob up to engage the oscillation function. |
If the problem persists after trying these solutions, please contact Orbegozo customer support.
Specifications
| Brand | Orbegozo |
| Model Number | SF 0147 |
| Type | Pedestal Fan |
| Power Source | Corded Electric |
| Wattage | 50 watts |
| Voltage | 230 Volts |
| Number of Blades | 3 |
| Number of Power Levels | 3 |
| Special Feature | Oscillating |
| Noise Level | 50 dB |
| Item Weight | 3.31 Kilograms (7.28 pounds) |
| Cable Length | 145 Centimeters |
Warranty and Support
For warranty information and customer support, please refer to the warranty card included with your product or visit the official Orbegozo website. Keep your purchase receipt as proof of purchase for any warranty claims.
Official Website: www.orbegozo.com
Contact Information: Please refer to the contact section on the official website for the most up-to-date customer service details.