DBPOWER Peak 1600A 18000mAh Portable Car Jump Starter User Manual

Introduction and Product Overview

The DBPOWER Peak 1600A 18000mAh Portable Car Jump Starter is a versatile and powerful device designed to provide reliable jump-starting capabilities for various vehicles, along with portable power for electronic devices. Its compact design and intelligent safety features make it an essential tool for emergency situations and everyday convenience.

Key features include:

• Powerful & Compact: Capable of jump-starting vehicles (up to 7.2L gas or 5.5L diesel engines) up to 20 times on a single charge with 1600 amps peak current.
• Smart Charging Port: 18000mAh capacity with a smart USB port for fast charging of smartphones, tablets, and other devices.
• Intelligent Protection: High-quality, spray-gold intelligent jumper clamps offer over current, short circuit, overload, over-voltage, and over-charge protection.
• LCD Screen & Compass: LCD screen displays remaining power and output voltage, while an integrated compass assists with navigation.
• Multi-functional LED Light: Features a powerful LED light with 3 modes (high, strobe, and SOS) and a red emergency light for hazard warning.

The DBPOWER Peak 1600A 18000mAh Portable Car Jump Starter, intelligent jumper clamps, and portable carry case.

Safety Information

ATTENTION: Please read the instructions carefully and strictly follow them before using the jump starter. Any wrong operation may cause damage to the jump starter or prevent the car from starting.

• Do not jump start any engine that exceeds the maximum displacement the unit can bear, as this will cause damage to the unit.
• Your jump starter will perform best when its battery is fully charged. If less than 30% charged, it may not be able to start your engine.
• Do not connect the positive and negative polarity together when the unit is powered on.
• Do not crank the engine for more than 3 seconds. Allow the jump starter to cool down for at least 30 seconds after each jump-start attempt.

The intelligent jumper clamps provide multiple layers of protection, including over-charge, short circuit, over-discharge, reverse polarity, over-current, reverse connection, and over-heat protection.

What's in the Box

Your DBPOWER Peak 1600A 18000mAh Portable Car Jump Starter package includes the following items:

• DBPOWER Jump Starter Unit
• Intelligent Jumper Clamps (12V)
• Type-C USB Charging Cable
• Portable Carry Case
• User Manual (this document)

Please note: A charging adapter is not included in the package.

Visual representation of the items included in the product package.

Setup and Charging

Before first use, fully charge your DBPOWER jump starter. It is recommended to fully charge the unit every 3-6 months to maintain battery health, even when not in use.

1. Connect the provided Type-C USB charging cable to the jump starter's input port.
2. Connect the other end of the USB cable to a suitable USB charging adapter (not included).
3. The LCD screen will indicate the charging status. Charge until the screen shows 100% or full charge.

The unit can also be charged via a 12V car outlet using an appropriate adapter (not included).

Operating Instructions

Jump Starting a Vehicle

Ensure the jump starter is at least 30% charged for optimal performance. For best results, a full charge is recommended.

1. Turn off your vehicle's ignition and all accessories.
2. Connect the blue plug of the intelligent jumper clamps into the jump starter's 12V output port. Ensure a secure connection.
3. Connect the red (+) clamp to the positive (+) terminal of your vehicle's battery.
4. Connect the black (-) clamp to the negative (-) terminal of your vehicle's battery.
5. Once connected, the indicator light on the intelligent clamps will show green if the connection is correct and safe. If it shows red or flashes, check the connections.
6. Start your vehicle. Do not crank for more than 3 seconds. If the vehicle does not start, wait at least 30 seconds before attempting again.
7. Once the vehicle starts, immediately remove the jumper clamps from the vehicle battery, first the black (-) clamp, then the red (+) clamp.
8. Disconnect the intelligent jumper clamps from the jump starter unit.

The DBPOWER jump starter is designed to start a wide range of vehicles, including those with up to 7.2L gas and 5.5L diesel engines.

Using as a Power Bank

The jump starter features multiple USB output ports to charge your electronic devices.

• Connect your device's USB charging cable to one of the jump starter's USB output ports (2.1A USB Output or 2.4A Smart USB Port).
• The jump starter will automatically begin charging your device.
• The LCD screen will show the remaining power of the jump starter.

The 18000mAh capacity allows for multiple charges of various portable electronic devices.

Using the LED Light and Compass

The jump starter includes a powerful LED flashlight and a built-in compass.

• LED Light: Press and hold the power button to turn on the LED light. Press again to cycle through modes (High, Strobe, SOS). Press and hold to turn off.
• Emergency Light: The red emergency light can be activated for hazard warning.
• Compass: The integrated compass on the surface helps with basic directional guidance.

Detailed view of the jump starter's various ports, buttons, and features, including the compass and LED light.

Maintenance

Proper maintenance ensures the longevity and optimal performance of your jump starter.

• Charging: Fully charge the unit every 3-6 months, even if not used, to prevent deep discharge and extend battery life.
• Storage: Store the jump starter in its portable carry case in a cool, dry place, away from direct sunlight and extreme temperatures.
• Cleaning: Wipe the unit with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
• Inspection: Periodically inspect the intelligent jumper clamps and cables for any signs of damage, wear, or corrosion. Replace if necessary.

The jump starter is designed for durability and safe operation across a range of environmental conditions.

Troubleshooting

If you encounter issues with your DBPOWER jump starter, refer to the following common troubleshooting tips:

• Unit not turning on: Ensure the unit is charged. If the battery is completely depleted, it may take a few minutes of charging before the LCD screen activates.
• Vehicle not starting:
  • Check if the jump starter has sufficient charge (at least 30%).
  • Verify that the intelligent clamps are securely connected to the correct battery terminals (red to positive, black to negative).
  • Ensure the indicator light on the intelligent clamps is green. If red or flashing, re-check connections.
  • Do not crank for more than 3 seconds. Allow 30 seconds cool-down between attempts.
  • Confirm your vehicle's engine displacement does not exceed the jump starter's maximum capacity (7.2L gas, 5.5L diesel).
• Devices not charging: Ensure the USB cable is properly connected to both the jump starter and your device. Check if the jump starter has sufficient power.
• LCD screen not displaying correctly: Try restarting the unit by pressing and holding the power button. If issues persist, contact customer support.

For further assistance, please refer to the contact information in the Warranty and Support section.

Specifications

Warranty and Support

DBPOWER is committed to providing safe and reliable products. Your DBPOWER jump starter comes with:

• 24 months of hassle-free service.
• Lifetime technical support.

For any questions or support needs, please contact DBPOWER customer service. Refer to the product packaging or the official DBPOWER website for the most current contact information.

You can also visit the official DBPOWER store on Amazon for more information and support: DBPOWER Amazon Store.