Rev-A-Shelf 35 Quart Polymer Waste Container User Manual

1. Introduction

This manual provides instructions for the Rev-A-Shelf 35 Quart Polymer Waste Container, Model RV-35-52. This durable replacement bin is designed for use with Rev-A-Shelf pullout systems in kitchens, bathrooms, laundry rooms, and offices, offering convenient and hygienic waste storage. It is intended as a replacement bin for existing Rev-A-Shelf 35 qt. pullout waste containers.

2. Product Overview & Features

The Rev-A-Shelf 35 Quart Polymer Waste Container is crafted from injection-molded polymer plastic, ensuring durability and long-lasting use. Its design is optimized for seamless integration into compatible Rev-A-Shelf pullout waste systems.

Key Features:

• Capacity: 35 Quarts (approximately 8.75 gallons).
• Material: Durable injection-molded polymer plastic.
• Compatibility: Specifically designed to fit Rev-A-Shelf 35 qt. pullout waste containers.
• Versatile Use: Suitable for kitchens, bathrooms, laundry rooms, and offices.
• Easy to Clean: Smooth polymer surface allows for simple cleaning with soap and water.

Product Benefits:

• Smart Sustainability: Open top design allows for large amounts of waste, minimizing trips to empty the bin.
• Simple Sophistication: A practical and aesthetically pleasing solution for waste management in various rooms.
• Organized Elegance: Helps keep your space clean and tidy by discreetly storing trash.

3. Setup & Installation

This product is a replacement waste container designed to fit into an existing Rev-A-Shelf pullout system. No complex installation is required for the bin itself.

3.1. Replacing Your Waste Container

1. Ensure your existing pullout system is a Rev-A-Shelf 35 qt. model. Check the bottom of your old container for the part number (e.g., RV-35).
2. Remove the old waste container from the pullout frame.
3. Carefully place the new Rev-A-Shelf 35 Quart Polymer Waste Container into the designated slot(s) of your pullout frame. Ensure it sits securely.

For visual guidance on placing the replacement bin, please refer to the video below:

3.2. Understanding Pullout System Installation (if applicable)

If you are installing a new Rev-A-Shelf pullout system that requires these bins, the following video provides a general overview of the installation process for double waste container pullouts. This video covers tools, parts, and steps for securing the frame within a cabinet.

For proper fitment of the pullout system, ensure you measure your cabinet opening accurately:

4. Operating Instructions

Using your Rev-A-Shelf 35 Quart Polymer Waste Container is straightforward:

1. Place a standard 13-gallon trash bag inside the container, ensuring the bag's rim is folded over the container's edge to prevent slippage.
2. Place the filled container into your Rev-A-Shelf pullout system.
3. When full, remove the trash bag, tie it securely, and dispose of it properly.
4. Replace with a new trash bag.

The container is designed for easy handling and removal from the pullout system for emptying or cleaning.

5. Care & Maintenance

Proper care ensures the longevity and hygiene of your Rev-A-Shelf waste container. For detailed care instructions, refer to the image below:

5.1. Cleaning the Waste Container

• Wipe Clean: Occasionally, products may become dirty from everyday use. Handwash with mild soap and water, then wipe dry.
• Avoid: Do not use abrasive cleaners or bleach, as these can damage the polymer plastic.
• Prompt Cleaning: Clean promptly if chemicals or oils come into contact with the bin to prevent damage.

5.2. Maintenance for Pullout Systems (if applicable)

While this product is the bin itself, if you have a Rev-A-Shelf pullout system, consider the following:

• Adjust: If any brackets or screws become loose over time, simply adjust or tighten them as needed.
• Grease: Pullout systems often use slides coated with multi-purpose grease. Do not apply additional grease unless necessary, and always use a good quality multi-purpose grease. Avoid spray lubricants, which can break down the original grease.

6. Troubleshooting

Most issues related to the waste container are minor and can be resolved easily.

Common Issues & Solutions:

• Bin Does Not Fit: Ensure you have the correct 35 qt. replacement bin for your specific Rev-A-Shelf pullout system. Check the part number on the bottom of your old bin or the pullout system documentation.
• Difficulty Inserting/Removing: Verify that no debris is obstructing the pullout frame or the bin's path. Ensure the bin is aligned correctly with the frame's guides.
• Unpleasant Odors: Regularly clean the bin as described in the Care & Maintenance section. Use a fresh trash bag and consider using odor-absorbing products if needed.

If you encounter persistent issues, please contact Rev-A-Shelf Customer Service.

7. Specifications

Detailed specifications for the Rev-A-Shelf 35 Quart Polymer Waste Container:

8. Warranty & Support

8.1. Warranty Information

This Rev-A-Shelf product comes with a Limited Lifetime Warranty. Please refer to the official Rev-A-Shelf website or your purchase documentation for full details regarding warranty coverage and terms.

8.2. Customer Support

For any additional questions, concerns, or support regarding your Rev-A-Shelf product, please contact customer service:

• Phone: 1-800-626-1126
• Email: INFO@REV-A-SHELF.COM

9. Additional Products & Options

Rev-A-Shelf offers a wide range of waste containers and accessories to complement your organizational needs. Explore various sizes, colors, and compatible lids.

9.1. Available Waste Container Sizes & Colors

9.2. Compatible Lids

Optional lids are available and sold separately to fit various Rev-A-Shelf waste containers, including the 35 qt. model (RV-35-LID).