HP USB Business Speakers v2 (N3R89AA) User Manual

Introduction

This manual provides essential information for the setup, operation, and maintenance of your HP USB Business Speakers v2. Please read this manual thoroughly before using the product to ensure proper functionality and longevity.

Package Contents

Verify that all items are present in the package:

• HP USB Business Speakers v2 (Pair)
• Integrated USB Cable (for power and audio)

Figure 1: HP USB Business Speakers v2 and included cables.

Setup

Follow these steps to connect your HP USB Business Speakers v2 to your computer:

1. Position the Speakers: Place the left and right speakers on either side of your computer monitor or desired listening area. Ensure they are on a stable, flat surface.
2. Connect the USB Cable: Locate the integrated USB cable from the speakers. Insert the USB-A connector into an available USB port on your computer. This connection provides both power and digital audio to the speakers.
3. System Recognition: Your operating system should automatically detect and install the necessary drivers for the speakers. This process may take a few moments.
4. Select Audio Output: Once installed, ensure your computer's audio output is set to the "HP USB Business Speakers v2" or similar USB audio device. This can typically be done through your operating system's sound settings.

Figure 2: Detail of the USB and audio connections.

Operating Instructions

Power On/Off

The HP USB Business Speakers v2 are powered directly via the USB connection. They will automatically power on when connected to a powered USB port and power off when the USB connection is removed or the computer is shut down.

Volume Control

Volume adjustment is primarily controlled through your computer's operating system sound settings or media player. The speakers feature a touch-sensitive area on the top of one speaker for quick volume adjustments. Tap to increase or decrease volume, or press and hold for continuous adjustment.

Audio Playback

Once connected and selected as the default audio output device, any audio played on your computer will be routed through the speakers. Ensure your computer's volume is not muted and is set to an audible level.

Maintenance

Cleaning

To clean the speakers, gently wipe the exterior surfaces with a soft, dry, lint-free cloth. Do not use liquid cleaners, aerosols, or abrasive materials, as these can damage the finish or internal components. Ensure the speakers are disconnected from power before cleaning.

Storage

When not in use for extended periods, store the speakers in a cool, dry place, away from direct sunlight and extreme temperatures. Avoid placing heavy objects on top of the speakers.

Troubleshooting

Specifications

Note: Specifications are subject to change without notice.

Warranty Information

The HP USB Business Speakers v2 (N3R89AA) come with a Limited Warranty. For specific terms and conditions, including duration and coverage details, please refer to the warranty card included with your product or visit the official HP support website. Keep your proof of purchase for warranty claims.

Support

For technical assistance, product inquiries, or to report issues not covered in this manual, please contact HP Customer Support. You can find contact information and additional resources on the official HP website:

www.hp.com/support

When contacting support, please have your product model (N3R89AA) and serial number (if applicable) ready.