1. Introduction
The Westek SLC6CBC-4 Light Sensor Socket provides automatic control for your lighting fixtures, enabling them to turn on at dusk and off at dawn, or operate on a timed schedule. This device is designed for both indoor and outdoor use, offering convenience and enhanced security by simulating home occupancy. It is compatible with standard light sockets and various bulb types, including incandescent, compact fluorescent, and LED bulbs up to 100W.

2. Safety Information
- WARNING: To avoid electric shock, always turn off power to the light fixture at the circuit breaker or fuse box before installation or servicing.
- Do not exceed the maximum wattage rating of 100 Watts for the connected bulb.
- Ensure the light sensor socket is installed in a fixture that allows the photocell sensor to receive natural light and is not obstructed by opaque or frosted glass.
- This device is intended for use with standard E26 base light bulbs.
- Do not use with dimmers or three-way switches.
3. Package Contents
- 2 x Westek Light Sensor Sockets (Model: SLC6CBC-4)

4. Product Overview
Familiarize yourself with the components of your Westek Light Sensor Socket:

- Bulb Insertion Port: Where the light bulb screws into the sensor socket.
- Control Programming Button: Used to select the desired operating mode (Dusk-to-Dawn or timed settings).
- Automatic Photocell Sensor: Detects ambient light levels to activate or deactivate the light.
- Control Connection Trigger: The screw-in base that connects to your existing light fixture socket.
5. Installation
Follow these steps to install your Westek Light Sensor Socket:
- Turn off Power: Ensure the power to the light fixture is completely off at the circuit breaker or fuse box before beginning installation.
- Screw in Control: Carefully screw the Westek Light Sensor Socket into your existing light fixture's socket until it is snug. Do not overtighten.
- Insert Light Bulb: Screw your light bulb (up to 100W) into the bulb insertion port of the sensor socket.
- Position Photocell Sensor: Orient the light fixture and sensor socket so that the photocell sensor (small black dot) faces natural light and is not obstructed by the fixture itself or artificial light sources (e.g., other lamps, streetlights) that could interfere with its operation.
- Program Control: Proceed to Section 6 to program your desired operating mode.

6. Operation & Programming
The Westek Light Sensor Socket offers multiple operating modes. Use the control programming button to cycle through the settings.

Operating Modes:
- Dusk-to-Dawn: The light will automatically turn on when it gets dark and turn off when it gets light. This is often the default setting out of the box.
- Timed Settings (2, 5, or 8 Hours): The light will turn on at dusk and remain on for a set duration of 2, 5, or 8 hours, then turn off.
- Random Setting: This mode turns the light on at dusk and off at random intervals, simulating home occupancy to deter potential intruders.
Programming Instructions:
- Ensure the light fixture has power. The light bulb will illuminate briefly to indicate it's receiving power.
- Locate the small control programming button on the side of the sensor socket (refer to Figure 3).
- Press the button repeatedly to cycle through the available operating modes. Each press will typically change the mode. Observe the light's behavior or any indicator (if present) to confirm the selected mode.
- Once your desired mode is selected, release the button. The setting will be saved.
Note: The exact indication for each mode (e.g., number of flashes) may vary. Refer to any included quick-start guide for specific visual cues if available. If no specific cues are provided, test the settings over a day/night cycle to confirm the desired operation.

Video 1: Video demonstrating the features and installation of the Westek Light Sensor Socket, including its programmable dusk-to-dawn and timed settings for various home lighting applications.
7. Maintenance
To ensure optimal performance of your light sensor socket:
- Periodically check that the photocell sensor is clean and free from dust, dirt, or obstructions. A dirty sensor may affect its ability to detect light accurately.
- Ensure no artificial light sources are directly shining on the photocell sensor, as this can cause the light to turn off prematurely or not turn on at all.
8. Troubleshooting
If you encounter issues with your Westek Light Sensor Socket, try the following:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on at dusk. |
|
|
| Light does not turn off at dawn. |
|
|
| Light turns on/off at incorrect times. |
|
|
9. Specifications
- Model: SLC6CBC-4 (CECOMINOD033758)
- Brand: Westek
- Voltage: 120 Volts
- Max Wattage: 100 Watts (for compatible bulbs)
- Product Dimensions: 1.95 inches (Width) x 3.3 inches (Height)
- Item Weight: 5.9 ounces
- Compatibility: Standard E26 light sockets
- Features: Dusk-to-Dawn, 2/5/8 Hour Timer, Random Timer

10. Warranty and Support
For warranty information or technical support, please refer to the official Westek website or contact their customer service department. Keep your purchase receipt for any warranty claims.