1. Introduction
This manual provides essential instructions for the assembly, operation, and maintenance of the TAROT FY690S 6-Axle Full 3K Carbon Fiber Folding Hexacopter Frame. Designed for DIY FPV RC drone enthusiasts, this frame features high-quality Toray 3K carbon fiber construction, ensuring durability and a lightweight design. Please read this manual thoroughly before beginning assembly or use.
2. Safety Information
General Safety Precautions:
- Always wear appropriate safety gear, including eye protection, during assembly.
- Keep small parts away from children to prevent choking hazards.
- Ensure all screws and fasteners are securely tightened before flight. Loose components can lead to equipment failure.
- This product is a frame and requires additional electronic components (motors, ESCs, flight controller, battery, etc.) for operation. Ensure all electronic installations follow their respective manufacturer's guidelines.
- Operate any completed drone responsibly and in accordance with local regulations.
3. Package Contents
Verify that all components are present before starting assembly.
- FY690S Full Folding Six-Axis Aircraft Frame (Pure Carbon Pipe Version) - 1 set
- Necessary fasteners and small parts for frame assembly.
- Note: Additional components such as motors, electronic speed controllers (ESCs), flight controller, propellers, battery, and camera are sold separately and are required to complete the drone.
4. Setup and Assembly
The TAROT FY690S frame is designed for straightforward assembly. Follow these steps carefully.
4.1 Main Frame Assembly
Begin by assembling the central plates. The frame utilizes Toray carbon fiber 3K woven CFRP plates for the top and bottom sections.
Image: Close-up of the central frame plates, showing the carbon fiber construction and mounting points.
- Identify the top and bottom central plates.
- Attach the aluminum standoffs between the top and bottom plates using the provided screws. Ensure they are finger-tight initially.
- Confirm the orientation of the plates, noting any designated mounting holes for flight controllers or other components.
4.2 Arm Installation
The FY690S features folding arms made from 3K carbon fiber hollow tubes.
Image: The TAROT FY690S frame in its folded state, highlighting the carbon fiber arms.
- Attach each of the six carbon fiber arms to the central frame using the folding mechanisms.
- Ensure the folding joints are correctly aligned and secured with the appropriate pins or screws, allowing for smooth folding and rigid locking when extended.
- Verify that all arms can fold and unfold without obstruction.
4.3 Motor Mount and Landing Gear Attachment
The frame includes Φ16MM multi-axis motor mounts.
Image: Detail of a folding arm with the motor mount plate.
- Mount the motor plates to the ends of each carbon fiber arm.
- Secure the landing gear components to the designated points on the frame, typically beneath the central plates or on specific arms.
- Ensure the landing gear is stable and provides adequate clearance for propellers and mounted equipment.
4.4 Final Inspection
Before installing electronics, perform a thorough inspection.
Image: Top view of the fully assembled TAROT FY690S frame.
- Check all screws and connections for tightness.
- Verify that the frame is rigid and free from any wobbling or excessive flex.
- Ensure all folding mechanisms lock securely in both folded and unfolded positions.
5. Operating Guidelines (Frame Use)
As a frame, the FY690S does not operate independently. These guidelines pertain to its use as a platform for a DIY hexacopter.
- Weight Distribution: When installing electronic components (flight controller, battery, camera, gimbal), ensure even weight distribution for optimal flight stability.
- Cable Management: Route all wiring neatly and securely to prevent interference with propellers or moving parts. Use zip ties or cable sleeves.
- Pre-Flight Checks: Before each flight, inspect the frame for any signs of damage, loose screws, or cracks in the carbon fiber.
- Folding Mechanism: When transporting, ensure the arms are fully folded and secured. When preparing for flight, ensure arms are fully extended and locked.
6. Maintenance
Regular maintenance will extend the lifespan of your TAROT FY690S frame.
- Cleaning: Wipe down carbon fiber surfaces with a soft, dry cloth. Avoid harsh chemicals that could damage the material.
- Fastener Checks: Periodically check all screws and bolts for tightness, especially after hard landings or impacts. Carbon fiber frames can transmit vibrations, potentially loosening fasteners over time.
- Carbon Fiber Inspection: Inspect carbon fiber plates and tubes for any cracks, delamination, or stress marks. Replace damaged components immediately.
- Folding Joints: Keep folding mechanisms clean and free of debris. Lubricate sparingly with a dry lubricant if movement becomes stiff.
7. Troubleshooting
This section addresses common issues related to the frame itself. For electronic component troubleshooting, refer to their respective manuals.
| Problem | Possible Cause | Solution |
|---|---|---|
| Frame feels unstable or wobbly after assembly. | Loose screws or improperly seated components. | Re-check all fasteners, especially those connecting the central plates and arms. Ensure all parts are fully seated. |
| Arms do not lock securely in place. | Folding mechanism not fully engaged or damaged. | Ensure the locking pins/screws are fully inserted. Inspect the folding joint for damage or debris. Replace if damaged. |
| Visible cracks or damage on carbon fiber parts. | Impact or stress during assembly/use. | Do not fly with damaged carbon fiber components. Replace the affected part immediately to prevent catastrophic failure. |
8. Specifications
Technical details for the TAROT FY690S Hexacopter Frame.
- Model: FY690S (TL68C01)
- Frame Type: 6-Axle Folding Hexacopter
- Material: Full 3K Carbon Fiber (Toray 3K woven CFRP plate, 3K hollow pure carbon fiber tubes)
- Dimensions (L x W x H): 27.17" x 27.17" x 27.17" (690mm x 690mm x 690mm) - Note: This likely refers to the diagonal motor-to-motor distance or overall footprint when unfolded.
- Item Weight: 600 Grams (Frame only)
- Motor Mounts: Φ16MM Multi-axis type
- Special Feature: Portable (Folding design)
- Manufacturer: Tarot
- Part Number: M07803
9. Warranty and Support
Warranty Information:
Specific warranty details for the TAROT FY690S frame are not provided in this manual. Please refer to the retailer or manufacturer's official website for current warranty terms and conditions. Keep your proof of purchase for any warranty claims.
Customer Support:
For technical assistance, missing parts, or further inquiries, please contact your authorized TAROT dealer or visit the official TAROT website for support resources.
- Brand: TAROT
- Manufacturer: Tarot
- Official Website: www.tarot-rc.com (Note: This is a general placeholder for a potential official website, as none was provided in the product data. Users should verify.)