Important Safety Instructions
Please read and save these instructions before operating your air purifier. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Always unplug the air purifier before moving, cleaning, or performing any maintenance.
- Do not operate the unit with a damaged cord or plug.
- Keep the power cord away from heated surfaces.
- Do not use the air purifier in wet or damp environments.
- Ensure all filters are correctly installed before operation.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Product Overview
The Fellowes Aeramax 290 is designed to improve air quality in rooms up to 290 square feet. It features a multi-stage filtration system including a HEPA filter and an activated carbon filter.
Figure 1: Fellowes Aeramax 290 Air Purifier. This image displays the black air purifier from a slight angle, showing its sleek design. The control panel with blue indicator lights is visible on the right side, and the air intake grille is on the left side. The unit stands on a stable base.
Components and Controls:
- Air Intake: Located on the sides, draws in room air.
- Air Outlet: Located at the top, releases purified air.
- Control Panel: Features button controls for various functions.
- Power Button: Turns the unit on or off.
- Fan Speed Button: Adjusts fan speed (Low, Medium, High, Turbo).
- Auto Mode Button: Activates automatic fan speed adjustment based on air quality.
- PlasmaWave Button: Activates or deactivates PlasmaWave technology.
- Filter Change Indicators: Lights up when filters need replacement.
Setup
- Unpack the Unit: Carefully remove the air purifier from its packaging. Retain packaging for future transport or storage.
- Install Filters:
- Open the front cover of the air purifier.
- Remove all protective plastic packaging from the HEPA filter and the Carbon filter.
- Insert the Carbon filter first, followed by the HEPA filter, ensuring they are seated correctly.
- Close the front cover securely.
- Placement: Place the air purifier on a firm, level surface. Ensure there is at least 6 inches (15 cm) of space around the unit for optimal airflow. Avoid placing it directly against walls or furniture.
- Power Connection: Plug the power cord into a standard 120V AC electrical outlet.
Operating Instructions
- Power On/Off: Press the Power Button once to turn the unit on. Press it again to turn the unit off.
- Adjust Fan Speed: Press the Fan Speed Button repeatedly to cycle through fan speeds: Low, Medium, High, Turbo. The corresponding indicator light will illuminate.
- Auto Mode: Press the Auto Mode Button to activate Auto Mode. The unit will automatically adjust fan speed based on detected air quality.
- PlasmaWave Technology: Press the PlasmaWave Button to turn PlasmaWave on or off. PlasmaWave creates ions to help remove airborne pollutants.
- Filter Reset: After replacing a filter, press and hold the corresponding Filter Change Indicator Button for 3-5 seconds until the light resets.
Maintenance
Regular maintenance ensures optimal performance and extends the life of your air purifier.
Filter Replacement:
- Carbon Filter: Replace approximately every 3 months, depending on usage and air quality.
- True HEPA Filter: Replace approximately every 12 months, depending on usage and air quality.
- When a filter change indicator light illuminates, it is time to replace the corresponding filter.
Cleaning the Unit:
- Always unplug the unit before cleaning.
- Wipe the exterior of the air purifier with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Periodically vacuum the pre-filter (if removable and washable) to remove large dust particles.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit does not turn on. | Power cord not securely plugged in. No power at outlet. | Check power cord connection. Test outlet with another device. |
| Poor airflow or purification. | Filters are dirty or clogged. Unit placed too close to obstructions. | Replace filters as needed. Ensure proper clearance around the unit. |
| Filter change indicator remains on after replacement. | Filter reset button not pressed. | Press and hold the corresponding filter reset button for 3-5 seconds. |
Specifications
- Model: Aeramax 290 (9286201)
- Brand: Fellowes
- Coverage Area: Up to 290 sq ft
- Filtration System: True HEPA, Activated Carbon
- Control Type: Button Control
- Color: Black
- ASIN: B01CW66ZO4
- UPC: 768674037110
- Power Input: 120V AC (Standard US)
Warranty and Support
For warranty information, technical support, or to purchase replacement filters, please visit the official Fellowes website or contact their customer service department.
Note: Specific warranty terms may vary by region and purchase date. Please refer to the warranty card included with your product or the manufacturer's website for the most current information.
