Introduction
The XPOWER P-830H Pro 1 HP Centrifugal Air Mover is an energy-efficient, high-velocity fan designed for a variety of drying, cooling, and ventilation applications. It is ideal for water damage restoration, janitorial tasks, plumbing, and general home use. Its robust construction and versatile features make it a valuable tool for both indoor and outdoor environments.
Figure 1: XPOWER P-830H Pro Air Mover, a powerful and compact unit.
Safety Information
Always read and understand all instructions before using the XPOWER P-830H Air Mover. Failure to follow these instructions may result in electric shock, fire, serious injury, or death.
- Ensure the unit is connected to a properly grounded outlet.
- Do not operate the unit with a damaged cord or plug.
- Keep children and pets away from the unit during operation.
- Do not use in standing water or excessively wet conditions.
- Avoid blocking air intake or exhaust openings.
- Disconnect from power supply before servicing or cleaning.
- This product is ETL/CETL safety certified, indicating compliance with North American safety standards.
Setup
The P-830H is designed for quick and easy deployment.
- Unpacking: Carefully remove the air mover from its packaging. Inspect for any shipping damage.
- Positioning: Place the air mover on a stable, flat surface. The unit features three drying positions (0°, 20°, and 90°) to direct airflow precisely where needed. Utilize the built-in kickstand for angled positions.
- Power Connection: Extend the 20 ft. industrial power cord and plug it into a suitable grounded electrical outlet.
- Stacking (Optional): For larger areas or storage, multiple P-830H units can be stacked up to four units high. Ensure units are securely stacked before operation.
Figure 2: The P-830H can be positioned at 0°, 20°, and 90° angles for optimal airflow direction.
Figure 3: Units can be stacked up to three high for efficient storage and transport.
Operating Instructions
The XPOWER P-830H is simple to operate with its intuitive controls.
- Power On: Locate the speed switch on the top of the unit.
- Select Speed: Turn the switch to select one of the three available speeds (1, 2, or 3). Speed 3 provides the maximum airflow of 3600 CFM.
- Adjust Position: If necessary, adjust the unit's position to 0°, 20°, or 90° to optimize airflow for the target area.
- Monitoring: Allow the unit to operate until the desired drying or ventilation is achieved.
- Power Off: Turn the speed switch to the "OFF" position when finished.
Figure 4: The control panel features a speed switch and convenient cord wrap for storage.
Applications:
- Water Damage Restoration: Accelerates drying of carpets, floors, walls, and other surfaces after leaks or floods.
- Ventilation: Improves air circulation in enclosed spaces, workshops, garages, and basements.
- General Drying: Useful for drying paint, furniture, and auto interiors.
Figure 5: The P-830H is versatile for various drying and ventilation needs.
Maintenance
Regular maintenance ensures optimal performance and longevity of your air mover.
- Cleaning: Periodically wipe down the exterior of the unit with a damp cloth. Ensure the unit is unplugged before cleaning.
- Air Intake/Exhaust: Keep the air intake and exhaust grilles free from dust, debris, and obstructions to maintain efficient airflow.
- Storage: When not in use, store the air mover in a cool, dry place. The unit's stackable design allows for efficient storage. Utilize the wrap-around cord design to keep the power cord tidy.
Troubleshooting
If you encounter issues with your XPOWER P-830H, refer to the following common troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit does not turn on. | No power, tripped circuit breaker, damaged cord/plug. | Check power outlet, reset circuit breaker, inspect cord/plug for damage. |
| Reduced airflow. | Blocked air intake/exhaust, dirty fan blades. | Clear obstructions, clean grilles and fan blades (ensure unit is unplugged). |
| Unusual noise or vibration. | Loose components, foreign object inside, unit not on a stable surface. | Ensure unit is on a stable surface, check for loose parts or foreign objects. If problem persists, contact customer service. |
For issues not listed above, or if troubleshooting steps do not resolve the problem, please contact XPOWER customer service.
Specifications
| Feature | Detail |
|---|---|
| Brand | XPOWER |
| Model Number | P-830H-Blue |
| Motor | 1 HP Induction Motor |
| Air Flow Capacity | Up to 3600 CFM (Cubic Feet Per Minute) |
| Amperage Draw | 8.5 Amps (at highest setting) |
| Speeds | 3 (Low, Medium, High) |
| Drying Positions | 0°, 20°, 90° |
| Housing Material | Injection-Molded Polypropylene (PP) |
| Power Cord Length | 20 ft. |
| Dimensions (L x W x H) | 15.9" x 18.7" x 18.7" |
| Item Weight | 27 Pounds |
| Safety Certification | ETL / CETL |
Figure 6: Key dimensions of the P-830H Air Mover.
Figure 7: Detailed specifications for the P-830H and other Pro Series models.
Warranty and Support
The XPOWER P-830H Air Mover is backed by a 1-year manufacturer limited warranty. This warranty covers defects in material and workmanship under normal use.
For warranty claims, technical support, or any inquiries, please contact XPOWER Manufacture Inc. customer service. Their California-based team offers comprehensive support to ensure a first-class customer experience.
Contact Information: Please refer to the official XPOWER website or your product packaging for the most current contact details.
