Introduction
This manual provides essential information for the proper setup, operation, and maintenance of your Stagg SDM50 Dynamic Microphone. Designed for both vocal and instrumental performance, the SDM50 offers reliable audio capture for various applications.
Package Contents
Upon unpacking, please verify that all components are present:
- Stagg SDM50 Dynamic Microphone
The image displays the Stagg SDM50 Dynamic Microphone alongside its retail packaging. The microphone features a black body with a silver mesh grille and an integrated on/off switch. The packaging is a black and beige box with a handle, showing the microphone's model number and brand.
Features
- Versatile application for both vocal and instrumental sound capture.
- Equipped with a DC78 moving coil for robust sound reproduction.
- Features a cardioid polar pattern, designed to pick up sound primarily from the front, reducing unwanted noise from the sides and rear.
- Offers a frequency response range of 50 Hz to 15 KHz, suitable for a wide array of audio sources.
- Includes a balanced XLR output for professional and interference-free connection.
Setup
- Connect the Microphone Cable: Insert a standard XLR cable (not included) into the balanced XLR output port located at the base of the microphone. Ensure a secure connection.
- Connect to Audio System: Connect the other end of the XLR cable to an appropriate input on your mixer, audio interface, or PA system. Verify that the input channel is correctly configured.
- Positioning: Place the microphone in the desired position for optimal sound capture. For vocals, typically position it a few inches from the sound source. For instruments, experiment with placement to achieve the best tone.
Operating Instructions
- Power On/Off: The Stagg SDM50 features an integrated on/off switch on its body. Slide the switch to the 'ON' position to activate the microphone. Slide it to 'OFF' when not in use to prevent unintended sound capture or feedback.
- Gain Adjustment: Adjust the gain (input level) on your connected mixer or audio interface. Start with the gain low and gradually increase it until the desired volume is achieved without clipping or distortion.
- Performance: Speak or sing directly into the microphone's grille. The cardioid polar pattern is most sensitive to sounds directly in front of it.
Maintenance
- Cleaning: Gently wipe the microphone body with a soft, dry cloth. For the grille, use a soft brush to remove any dust or debris. Avoid using liquid cleaners directly on the microphone.
- Storage: When not in use, store the microphone in a protective case or bag to prevent physical damage and exposure to dust or moisture. Avoid extreme temperatures.
- Cable Care: Always grasp the connector, not the cable, when plugging or unplugging. Avoid sharp bends or kinks in the cable to prolong its lifespan.
Troubleshooting
No Sound Output
- Check Cable Connections: Ensure the XLR cable is securely connected to both the microphone and the audio input device.
- Verify Power/Switch: Confirm the microphone's on/off switch is in the 'ON' position.
- Input Gain: Check the gain level on your mixer or audio interface. It might be set too low or muted.
- Input Selection: Ensure the correct input channel is selected on your audio device.
Poor Sound Quality / Distortion
- Gain Level: Reduce the input gain on your mixer or audio interface if the sound is distorted. The signal might be too strong.
- Microphone Placement: Adjust the microphone's distance from the sound source. Being too close or too far can affect sound quality.
- Cable Integrity: Test with a different XLR cable to rule out a faulty cable.
- Feedback: If experiencing feedback (a howling sound), reduce the overall volume, adjust microphone placement, or use an equalizer to cut problematic frequencies.
Specifications
| Feature | Specification |
|---|---|
| Model Number | SDM50 |
| Brand | Stagg |
| Microphone Form Factor | Handheld |
| Polar Pattern | Unidirectional (Cardioid) |
| Connectivity Technology | XLR |
| Connector Type | XLR |
| Frequency Response | 50 Hz to 15 KHz |
| Audio Sensitivity | 54 Decibels |
| Signal-to-Noise Ratio | 76 dB |
| Power Source | Corded Electric |
| Number of Channels | 1 |
| Item Dimensions (L x W x H) | 12 x 4 x 6 inches |
| Item Weight | 1.58 pounds |
| Included Components | Microphone |
| UPC | 882030225215 |
Warranty and Support
For warranty information and technical support, please refer to the official Stagg website or contact your authorized Stagg dealer. Keep your purchase receipt as proof of purchase.