Cornat Oscillating Sprinkler with 16 Nozzles

Introduction

Thank you for choosing the Cornat Oscillating Sprinkler. This manual provides essential information for the proper setup, operation, and maintenance of your sprinkler. This oscillating sprinkler is designed for efficient and adjustable watering of lawns and gardens.

Key features include:

• Adjustable four-corner spray patterns via a rotation controller.
• Continuously adjustable range and individually adjustable throw width.
• Integrated water flow-through controller.
• Maximum irrigation surface of approximately 16 x 13 meters (208 m²) at 4.2 bar water pressure.
• Constructed with a polypropylene foot and ABS head, featuring 16 precision nozzles.

The Cornat Oscillating Sprinkler, featuring a red base and a black and red oscillating head with 16 spray nozzles.

Safety Information

Please read and understand all safety instructions before using this product. Failure to follow these instructions may result in property damage or injury.

• Always ensure the sprinkler is placed on a stable, level surface to prevent tipping during operation.
• Do not operate the sprinkler with damaged components. Inspect the unit and hose connections before each use.
• Keep children and pets away from the sprinkler during operation to avoid accidental injury.
• Do not attempt to modify the sprinkler. Use only as intended for watering purposes.
• Disconnect the water supply and drain the sprinkler before moving or performing any maintenance.

Package Contents

Your package should contain the following item:

• One (1) Cornat Oscillating Sprinkler (Model FLOR89763)

Setup

1. Positioning the Sprinkler: Place the sprinkler on a flat, stable surface in the area you wish to water. Ensure the base is secure to prevent movement during operation.
2. Connecting the Water Hose: Attach a standard garden hose to the inlet connector located on the side of the sprinkler. Hand-tighten the connection to ensure a leak-free seal. Do not overtighten.
3. Water Supply: Slowly turn on the water supply to the hose. Check for any leaks at the connection points.

Operating Instructions

The Cornat Oscillating Sprinkler offers various adjustments to customize your watering experience.

1. Adjusting Spray Pattern and Width

The sprinkler features 16 nozzles and adjustable sliders to control the width and shape of the spray pattern.

A close-up of the sprinkler's top, showing the black sliders on either side of the nozzle bar, which are used to adjust the width and range of the spray.

• Wide Spray: To achieve a wide, rectangular spray pattern, slide both black adjustment tabs on the top of the sprinkler head outwards to their maximum extent.
• Narrow Spray: For a more concentrated, narrow spray, slide both adjustment tabs inwards.
• Partial Area Spray: To water only one side or a specific section, adjust one tab inwards and the other outwards, or both to an intermediate position. Experiment with the tab positions to find the desired coverage area.

The sprinkler is shown in operation on a green lawn, emitting a wide, fan-shaped spray pattern, indicating broad area coverage.

The sprinkler is shown operating on a green lawn, emitting a concentrated, narrow spray pattern, suitable for smaller or specific areas.

2. Adjusting Water Flow

The sprinkler is equipped with a water flow-through controller to manage the intensity of the spray.

A detailed view of the sprinkler's side, highlighting the black lever used to adjust the water flow rate, indicated by an arrow and varying bar sizes.

• Locate the black lever on the side of the sprinkler head.
• Move the lever up or down to increase or decrease the water flow. The markings next to the lever indicate the relative flow rate.
• Adjust the flow to suit your watering needs and water pressure conditions.

Maintenance

Regular maintenance will ensure the longevity and optimal performance of your sprinkler.

• Cleaning Nozzles: Periodically inspect the 16 nozzles for blockages from dirt or mineral deposits. Use a small brush or needle to gently clear any obstructions.
• Filter Cleaning: If your water source contains sediment, the inlet filter (if present) may need occasional cleaning. Disconnect the hose and remove the filter to rinse it under running water.
• Storage: Before freezing temperatures, disconnect the sprinkler from the hose, drain all water, and store it in a dry, protected area to prevent damage from ice expansion.
• General Cleaning: Wipe down the exterior of the sprinkler with a damp cloth as needed to remove dirt and debris.

Troubleshooting

If you encounter issues with your sprinkler, refer to the following common problems and solutions:

• Uneven Spray Pattern or Reduced Range:
  • Check for clogged nozzles and clean them as described in the Maintenance section.
  • Ensure adequate water pressure from your supply.
  • Verify that the spray width adjustment tabs are correctly positioned.
• Leaks at Hose Connection:
  • Ensure the hose connection is securely hand-tightened.
  • Check the rubber washer inside the hose connector for damage or proper seating. Replace if necessary.
• Sprinkler Not Oscillating:
  • Confirm sufficient water pressure. Low pressure can affect the oscillation mechanism.
  • Inspect the oscillation mechanism for any visible obstructions or damage.

Specifications

An image illustrating the approximate dimensions of the sprinkler, showing it held in hands with a measurement of 8.1 inches (20 cm) in length.

Warranty and Support

This product is covered by a standard manufacturer's warranty against defects in materials and workmanship. For specific warranty details, please refer to the product packaging or contact your retailer.

For technical support or inquiries, please contact the manufacturer or your point of purchase. Please have your model number (FLOR89763) available when seeking assistance.