KAWADA Nano-block Vespa mandarinia japonica PBH-011 Instruction Manual

Introduction

This instruction manual provides detailed guidance for assembling and maintaining your KAWADA Nano-block Vespa mandarinia japonica PBH-011 model. Please read all instructions carefully before beginning assembly to ensure a correct and enjoyable building experience. This set contains 30 pieces.

The KAWADA Nano-block series offers miniature building block sets designed for intricate detail and display. This model represents the Vespa mandarinia japonica, commonly known as the Japanese giant hornet.

Package Contents

Before starting, verify that all components are present. The package should contain:

• Nano-block pieces (30 pieces total)
• Instruction sheet (this document)

If any pieces are missing or damaged, please contact KAWADA customer support.

Setup and Assembly

Follow these steps to assemble your Nano-block model. It is recommended to work on a clean, flat surface to prevent loss of small pieces.

1. Step 1: Prepare the Base
   Begin by identifying the base pieces. These typically form the core structure of the model. Refer to the diagram below for initial placement.

   Image: Initial assembly stage, showing the foundational orange and black blocks that form the body of the hornet.

2. Step 2: Construct the Body
   Attach the orange and black blocks to form the main body segments. Pay close attention to the orientation of each block.

   Image: Partially assembled model, illustrating the connection of body segments and the start of wing structures.

3. Step 3: Attach Wings and Legs
   Carefully connect the brown wing pieces and the black leg components to the main body. Ensure a secure fit for all parts.

   Image: Top-down view of the completed hornet, showing the arrangement of wings and legs.

4. Step 4: Final Details
   Add any remaining small detail pieces to complete the model. Double-check all connections to ensure stability.

   Image: Front view of the fully assembled model, showcasing its final appearance and clear display stand.

Operating Instructions (Display and Handling)

Once assembled, your Nano-block model is primarily for display. Handle with care to prevent accidental disassembly.

• Display Location: Place the model on a stable, flat surface away from direct sunlight, excessive heat, or high humidity.
• Handling: When moving the model, support it from the base to avoid putting stress on individual connections.
• Not a Toy: This model contains small parts and is not intended for rough play. It is recommended for ages 12 and up due to the small size of the blocks.

Maintenance

Proper care will help maintain the appearance of your Nano-block model.

• Cleaning: Use a soft, dry cloth or a small, soft brush to gently remove dust. Avoid using water or chemical cleaners, as these may damage the plastic.
• Storage: If disassembling for storage, keep all pieces in a sealed container to prevent loss.

Troubleshooting

Common issues and their solutions:

• Model is unstable: Double-check all connections. Ensure blocks are fully pressed together. Refer to the assembly diagrams to confirm correct placement.
• Missing piece: Carefully re-check the packaging and your work area. If a piece is genuinely missing, contact KAWADA customer support with your model number and the specific piece required.
• Difficulty connecting blocks: Ensure blocks are aligned correctly. Apply gentle, even pressure. Do not force blocks together, as this may cause damage.

Specifications

Warranty and Support

KAWADA products are manufactured to high-quality standards. For information regarding warranty, missing parts, or customer support, please visit the official KAWADA website or contact their customer service department directly. Please have your model number (PBH-011) ready when contacting support.

Official KAWADA Website: www.kawada.jp

Note: Specific warranty terms may vary by region. Please consult the official website for details relevant to your location.