Introduction
This user manual provides detailed instructions for the installation, operation, and maintenance of the Thermaltake Commander FN1006 FP PWM Fan Hub. This device is designed to centralize fan connections and control, enhancing system cooling efficiency and improving cable management within your PC chassis.
Product Overview
Key Features:
Supports up to 10 PWM fan connections for comprehensive cooling control.
Utilizes a convenient SATA power input for stable power delivery.
Equipped with a blue LED indicator to show operational status at a glance.
Designed to significantly improve cable management within your PC case.
Includes fastening bands and Velcro for secure installation and organization.
Package Contents:
Thermaltake Commander FN1006 FP PWM Fan Hub
PWM signal cable
Fastening bands
Velcro mounting strips
Product Views:

Figure 1: Top-down view of the Thermaltake Commander FN1006 FP PWM Fan Hub, showing the 10 fan headers and the Thermaltake logo.

Figure 2: Angled view of the fan hub, highlighting the compact design and multiple fan connection ports.

Figure 3: Size comparison of the fan hub held in a hand, illustrating its compact dimensions (approximately 4 cm in height).
Setup and Installation
Follow these steps to properly install your Thermaltake Commander FN1006 FP PWM Fan Hub:
Prepare your PC case: Ensure your PC case has adequate space for mounting the fan hub. The hub can be mounted using the included Velcro strips or fastening bands.
Mount the Fan Hub: Choose a suitable location within your PC case, typically behind the motherboard tray or in an unused drive bay area, to optimize cable management. Use the provided Velcro strips to secure the hub firmly to a flat surface, or use the fastening bands to tie it down.

Figure 4: Included accessories for mounting and cable management, including fastening bands and Velcro strips.
Connect the SATA Power Cable: Connect a SATA power cable from your power supply unit (PSU) to the SATA power input port on the fan hub. This provides the necessary power for all connected fans.

Figure 5: The fan hub with a SATA power cable connected, illustrating the power input port.
Connect the PWM Signal Cable: Connect the included 4-pin PWM signal cable from the fan hub's designated input port to a 4-pin PWM fan header on your motherboard (e.g., CPU_FAN or SYS_FAN). This connection allows your motherboard to control the speed of all fans connected to the hub.

Figure 6: The 4-pin PWM signal cable used to connect the fan hub to the motherboard.
Connect your Fans: Connect up to 10 PWM (4-pin) fans to the available fan headers on the hub. Ensure each fan connector is securely seated.

Figure 7: The fan hub installed in a PC case, demonstrating how multiple fan cables are connected and managed.
Cable Management: Utilize the fastening bands to neatly route and secure fan cables, improving airflow and aesthetics within your PC case.
Operation
The Thermaltake Commander FN1006 FP PWM Fan Hub operates by receiving a PWM signal from a single motherboard fan header and distributing it to all connected fans. This allows for synchronized speed control of up to 10 fans based on your motherboard's fan curve settings.
LED Indicator:
The fan hub features a blue LED indicator. When the hub is powered on and functioning correctly, this LED will illuminate, providing a visual confirmation of its operational status.

Figure 8: The fan hub showing the illuminated blue LED, indicating active operation.
Fan speed control is managed through your motherboard's BIOS settings or compatible fan control software. Refer to your motherboard's manual for specific instructions on configuring fan curves and monitoring fan speeds.
Maintenance
The Thermaltake Commander FN1006 FP PWM Fan Hub requires minimal maintenance. To ensure optimal performance and longevity:
Dust Removal: Periodically inspect the fan hub and its connections for dust accumulation. Use compressed air or a soft, dry cloth to gently remove any dust. Ensure the PC is powered off and unplugged before cleaning.
Connection Check: Occasionally verify that all fan cables and the SATA power cable are securely connected to the hub and the motherboard. Loose connections can lead to intermittent fan operation.
Avoid Liquids: Keep the fan hub away from liquids and excessive moisture to prevent damage to the electronic components.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Fans not spinning or no power to hub. | No SATA power connected or loose connection. | Ensure the SATA power cable from the PSU is securely connected to the fan hub. Check PSU connections. |
| Fans spinning at full speed constantly. | PWM signal cable not connected or motherboard BIOS settings incorrect. | Verify the 4-pin PWM signal cable is securely connected from the hub to a PWM header on the motherboard. Check motherboard BIOS settings to ensure the fan header is set to PWM mode and a fan curve is configured. |
| Only some fans are spinning. | Loose fan connection or faulty fan. | Check the connections of the non-spinning fans to the hub. Test individual fans by connecting them directly to a motherboard fan header if possible. |
| Blue LED on hub is off. | No power to the hub. | Ensure the SATA power cable is properly connected and your PSU is providing power. |
Specifications
| Feature | Detail |
|---|---|
| Brand | Thermaltake |
| Model Number | AC-023-AN1NAN-A1 |
| Fan Compatibility | PWM (4-Pin) Fans |
| Maximum Fan Connections | 10 |
| Power Input | SATA Power Connector |
| Control Input | 4-Pin PWM Motherboard Header |
| Indicator | Blue LED |
| Dimensions (approx.) | 15.4 x 10.1 x 3.1 cm |
| Weight (approx.) | 82 g |
Warranty and Support
For warranty information and technical support, please refer to the official Thermaltake website or contact their customer service department. Keep your purchase receipt as proof of purchase for warranty claims.
Online Resources:
Thermaltake Official Website: www.thermaltake.com