Introduction
This manual provides essential information for the safe and effective use of the Vestil PDA-1627-C-S Aluminum Plate Dolly. Please read this manual thoroughly before operation to ensure proper handling, maintenance, and to prevent injury or damage to the equipment.
The Vestil PDA-1627-C-S is an aluminum plate dolly designed for material handling. It features a heavy-duty raised diamond tread plate for strength and enhanced grip, making it suitable for transporting various items within its specified load capacity.
Safety Instructions
- Always inspect the dolly before each use for any signs of damage, wear, or loose components. Do not use if damaged.
- Do not exceed the maximum load capacity of 2800 pounds. Overloading can cause structural failure and injury.
- Ensure the load is centered and stable on the dolly before moving. Uneven loads can cause tipping.
- Operate the dolly on flat, level surfaces. Avoid inclines, declines, or uneven terrain.
- Maintain a clear path when moving the dolly. Be aware of surroundings and potential obstacles.
- Do not ride on the dolly or allow others to do so.
- Wear appropriate safety footwear when operating the dolly.
Setup
The Vestil PDA-1627-C-S Aluminum Plate Dolly typically arrives pre-assembled and ready for use. However, it is crucial to perform a pre-operation check to ensure all components are secure and functional.
- Unpacking: Carefully remove the dolly from its packaging. Inspect for any shipping damage.
- Wheel Inspection: Verify that all four cast steel wheels are securely attached to the dolly frame. Check that the wheels rotate freely without obstruction.
- Frame Integrity: Examine the aluminum plate and frame for any cracks, bends, or deformities. The raised diamond tread plate should be intact.
- Hardware Check: Ensure all bolts, nuts, and fasteners are tight. Do not overtighten.
Image: Top-down view of the Vestil PDA-1627-C-S Aluminum Plate Dolly, showcasing its aluminum diamond tread plate and four cast steel wheels. This view highlights the overall structure and surface of the dolly.
Operating Instructions
Proper operation ensures efficiency and safety when using the aluminum plate dolly.
- Load Placement: Carefully place the item to be moved onto the center of the dolly's aluminum plate. Distribute the weight as evenly as possible to maintain balance.
- Weight Limit: Ensure the total weight of the item does not exceed the dolly's 2800 lb. capacity.
- Movement: Gently push or pull the dolly to move the load. Avoid sudden jerks or rapid changes in direction.
- Navigating Obstacles: When encountering small obstacles or uneven surfaces, proceed with caution. If the obstacle is too large, consider an alternative route or method.
- Stopping: Bring the dolly to a complete stop before attempting to remove the load.
Image: Angled view of the Vestil PDA-1627-C-S Aluminum Plate Dolly, showing the side profile and the robust construction of the cast steel wheels. This perspective emphasizes the dolly's low profile and stability.
Maintenance
Regular maintenance will extend the life of your Vestil PDA-1627-C-S dolly and ensure safe operation.
- Cleaning: Clean the aluminum plate and wheels periodically to remove dirt, debris, and grime. Use a mild detergent and water, then dry thoroughly.
- Wheel Bearings: Inspect wheel bearings for smooth operation. If wheels are stiff or noisy, they may require lubrication or replacement. Consult a qualified technician if unsure.
- Fasteners: Periodically check all bolts and nuts for tightness. Retighten as necessary, but do not overtighten.
- Storage: Store the dolly in a dry, clean environment when not in use to prevent corrosion and damage.
Image: Front view of the Vestil PDA-1627-C-S Aluminum Plate Dolly, showing the width of the plate and the alignment of the front wheels. This view emphasizes the compact design and the sturdy wheel assembly.
Troubleshooting
This section addresses common issues you might encounter with your dolly.
| Problem | Possible Cause | Solution |
|---|---|---|
| Dolly is difficult to move or wheels are stiff. |
|
|
| Dolly tips easily or is unstable. |
|
|
Image: Rear view of the Vestil PDA-1627-C-S Aluminum Plate Dolly, providing a clear look at the rear wheels and the underside of the aluminum plate. This view confirms the sturdy construction from all angles.
Specifications
| Attribute | Detail |
|---|---|
| Brand | Vestil |
| Model Number | PDA-1627-C-S |
| Material | Alloy Steel, Aluminum |
| Color | Silver |
| Style | Heavy-duty |
| Product Dimensions (L x W x H) | 27" x 16" x 6.19" |
| Item Weight | 35.8 pounds |
| Wheel Type | Cast Steel |
| Load Capacity | 2800 Pounds |
| Number of Wheels | 4 |
| UPC | 691215090780 |
Manufacturer Information
Vestil Manufacturing Company is an industry leader in the production and distribution of material handling equipment. They focus on engineering new designs and products that increase productivity, improve workplace ergonomics, and decrease worker injury.
Image: Exterior view of a Vestil Manufacturing Company facility, showcasing the company's commitment to industrial solutions. This image provides a visual representation of the manufacturer's presence.
Image: The official Vestil company logo, featuring the brand name in blue text with a yellow and black swoosh. The tagline "We've Got It!" is also visible.
