Introduction
Thank you for purchasing the Brentwood TS-361W 1500-Watt Double Electric Burner. This appliance is designed to provide convenient and efficient cooking capabilities, whether as an extension to your existing kitchen or as a portable cooking solution. Please read this instruction manual thoroughly before operating the appliance to ensure safe use and optimal performance. Keep this manual for future reference.
Important Safeguards
When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:
- Read all instructions before using the appliance.
- Do not touch hot surfaces. Use handles or knobs.
- To protect against electrical shock, do not immerse cord, plugs, or the appliance in water or other liquid.
- Close supervision is necessary when any appliance is used by or near children.
- Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts.
- Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair, or adjustment.
- The use of accessory attachments not recommended by the appliance manufacturer may cause injuries.
- Do not use outdoors.
- Do not let cord hang over edge of table or counter, or touch hot surfaces.
- Do not place on or near a hot gas or electric burner, or in a heated oven.
- Extreme caution must be used when moving an appliance containing hot oil or other hot liquids.
- Always attach plug to appliance first, then plug cord into the wall outlet. To disconnect, turn any control to "off", then remove plug from wall outlet.
- Do not use appliance for other than intended use.
- A short power-supply cord is provided to reduce the risks resulting from becoming entangled in or tripping over a longer cord.
- Extension cords may be used if care is exercised in their use. If an extension cord is used, the marked electrical rating of the extension cord should be at least as great as the electrical rating of the appliance.
- The appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to modify the plug in any way.
Parts Identification
Familiarize yourself with the components of your double electric burner:
- Heating Elements: Two sealed coil burners for cooking.
- Temperature Control Knobs: Independent knobs for each burner to adjust heat settings.
- Power Indicator Lights: Lights that illuminate when a burner is active.
- Base Unit: The main body of the burner, housing electrical components.
- Non-Skid Feet: Rubber feet on the bottom for stability.
Setup
- Unpacking: Carefully remove the electric burner from its packaging. Retain the packaging for storage or disposal.
- Placement: Place the burner on a stable, flat, heat-resistant surface, such as a countertop or table. Ensure there is adequate clearance around the unit for ventilation. Do not place it on or near flammable materials.
- First Use Preparation: Before first use, wipe the heating elements and the body of the burner with a damp cloth to remove any dust. Ensure the unit is completely dry before plugging it in.
- Initial Burn-off: During the first use, a small amount of smoke and odor may be emitted from the heating elements. This is normal and will dissipate quickly. It is recommended to operate the burner on its highest setting for approximately 5-10 minutes in a well-ventilated area during its first use to burn off any manufacturing residues.
Operating Instructions
- Connect Power: Ensure both temperature control knobs are in the "OFF" position. Plug the power cord into a standard 120V AC electrical outlet.
- Place Cookware: Place appropriate cookware (pots, pans) directly onto the desired heating element. Ensure the cookware has a flat bottom and is suitable for electric cooktops.
- Adjust Temperature: Turn the corresponding temperature control knob clockwise from "OFF" to the desired heat setting. The power indicator light for that burner will illuminate, indicating that the burner is heating.
- Cooking: The burner will heat up quickly. Adjust the temperature knob as needed for simmering, boiling, or frying. The indicator light will cycle on and off as the burner maintains the selected temperature.
- After Use: Once cooking is complete, turn the temperature control knob counter-clockwise back to the "OFF" position. The power indicator light will turn off.
- Cool Down: Allow the burner to cool completely before cleaning or storing. The heating elements will remain hot for some time after being turned off.
Cleaning and Maintenance
Proper cleaning and maintenance will extend the life of your electric burner.
- Always unplug the appliance from the electrical outlet and allow it to cool completely before cleaning.
- Cleaning the Body: Wipe the exterior surfaces with a damp cloth and mild detergent. Do not use abrasive cleaners or scouring pads, as they may scratch the finish.
- Cleaning Heating Elements: The sealed heating elements are designed for easy cleaning. For light spills, wipe with a damp cloth once cooled. For stubborn stains, a non-abrasive cleaner specifically designed for cooktops can be used, but ensure no liquid enters the internal components.
- Do not immerse the burner unit, cord, or plug in water or any other liquid.
- Storage: When not in use, store the appliance in a cool, dry place. Ensure the power cord is neatly wrapped and not kinked.
Troubleshooting
If you encounter issues with your electric burner, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Burner does not heat up. | Not plugged in; power outlet not working; control knob not set. | Ensure the unit is properly plugged into a working outlet. Check the circuit breaker. Turn the control knob to a heat setting. |
| Power indicator light is off, but burner is hot. | Normal operation (thermostat cycling). | The indicator light cycles on and off to maintain the set temperature. This is not a malfunction. |
| Smoke or odor during first use. | Manufacturing residues burning off. | This is normal. Operate in a well-ventilated area for 5-10 minutes. It will dissipate. |
| Burner heats too slowly or unevenly. | Incorrect cookware; low heat setting. | Use flat-bottomed cookware appropriate for electric cooktops. Increase the heat setting. |
If the problem persists after checking these points, please contact customer support.
Specifications
| Model Number | TS-361W |
| Wattage | 1500 Watts |
| Number of Heating Elements | 2 |
| Burner Type | Sealed Coil |
| Controls Type | Knob |
| Material | Stainless Steel |
| Color | White |
| Product Dimensions (D x W x H) | 19.44" x 3.15" x 11" |
| Item Weight | 4.1 Pounds |
| Power Source | Electric |
Warranty
This Brentwood TS-361W Double Electric Burner comes with a 1-year limited warranty from the date of purchase. This warranty covers manufacturing defects in materials and workmanship under normal use. It does not cover damage resulting from misuse, abuse, accident, alteration, or unauthorized repair. Please retain your proof of purchase for warranty claims.
Customer Support
For technical assistance, warranty claims, or general inquiries regarding your Brentwood TS-361W Double Electric Burner, please contact Brentwood customer service. Refer to the contact information provided on the product packaging or the official Brentwood website for the most up-to-date support details.
When contacting support, please have your model number (TS-361W) and proof of purchase readily available.
